TOP 6 HOME ASSISTANT CLIMATE / THERMOSTAT CARDS

[@xbox360benji]

Checking this out now matey I dont like having to open my thermostat card to activate on or off I need more direct acess..thanks for sharing !

[@smart_home_australia]

Hi again @xbox360benji, yep i know what you mean, make sure you try the Simple Thermostat, it has the power toggle directly on the front.

[@xbox360benji]

@@smart_home_australia Thats the one I settled on for now 😆

[@wolfgangwidmer7758]

How do I get the thermostat card to turn the ac on after a power outage. The when Home Assistant reboots the car is turned off and I have to go in and turn it on. I’m using a relay to control my hvac with esp32 and esphome.

[@smart_home_australia]

Interesting problem. Although I have not tried this myself as I have whole house UPS, you could try using a helper toggle switch. Use the card to toggle the helper, then insert an automation to set the AC power based on the helper.

[@SuperKnightwind]

thank you for this!!

[@smart_home_australia]

You're so welcome!

[@SuperKnightwind]

how can you change the sizes and colors on these?@@smart_home_australia

[@smart_home_australia]

Which one?

[@SuperKnightwind]

@@smart_home_australiathe simple thermostat card

[@SuperKnightwind]

@@smart_home_australia the simple thermostat card

[@Traci_S_Aaron]

How diffcult would it be to create our own HVAC card? Maybe edit one thats already built to our personal taste. The options are ok just the over all design of all these cards leaves much to be desired

[@smart_home_australia]

HI @Traci_S_Aaron, Never really looked into it myself, but yes it would be good to try and although there are usually cards out there to service most requests, they always seem to have some small feature that is missing :), check out this link for an idea on how to do it yourself. shorturl.ac/7cv4o

[@zzetterberg]

are all cards Max 30 degrees (c)

[@smart_home_australia]

The maximum temperature for Lovelace thermostat cards in Home Assistant can be customized, but by default it is typically set to 35°C (95°F).

[@reliefaqua6801]

Only issue with the better thermostat ui card is the lack of ability to change the colors. The page shows different colors but there is no apparent way to do this. Im still stuck on that.

[@smart_home_australia]

Have you tried custom themes ?