Topaz Pre Wash with Worx Hydroshot 56bar Part 1

Topaz Advanced Pre Wash is a product primarily used in automotive detailing to prepare the surface of a vehicle for further cleaning or detailing processes. Here's a general guide on how to use it:
#insta360 #worx #insta360acepro
@TopazDetailing
1. **Prepare the Surface**: Before applying Topaz Advanced Pre Wash, ensure that the vehicle's surface is cool to the touch and parked in a shaded area. This helps prevent the product from drying too quickly, which could leave residue on the surface.
2. **Dilution**: Depending on the concentration of the product and the level of dirt or grime on the vehicle, you may need to dilute Topaz Advanced Pre Wash with water. Check the product label for specific instructions on dilution ratios.
3. **Application**: Once the product is properly diluted (if necessary), apply it to the vehicle's surface using a foam cannon, foam gun, or sprayer. Start from the bottom of the vehicle and work your way up to ensure complete coverage.
4. **Allow Dwell Time**: Allow the product to dwell on the surface for a few minutes. This dwell time allows the active ingredients in the pre-wash to penetrate and loosen dirt, grime, and other contaminants, making them easier to remove during the wash process.
5. **Agitation (Optional)**: For heavily soiled areas or stubborn contaminants, you may need to agitate the surface with a soft-bristled brush or mitt. Be gentle to avoid scratching the paintwork.
6. **Rinse Off**: After the appropriate dwell time, thoroughly rinse the vehicle with a strong stream of water, starting from the top and working your way down. Use a pressure washer or a garden hose with a nozzle attachment to ensure thorough rinsing.
7. **Inspect and Repeat (if necessary)**: Once the vehicle is rinsed, inspect the surface to ensure that all dirt and contaminants have been removed. If necessary, repeat the pre-wash process for any areas that require additional cleaning.
8. **Proceed with Wash**: After using Topaz Advanced Pre Wash, you can proceed with the rest of your vehicle washing process, such as using a car shampoo, clay bar treatment, or other detailing steps as needed.
9. **Final Rinse and Dry**: Once the vehicle is clean, give it a final rinse to remove any remaining soap or residue, then dry it thoroughly using a microfiber towel or a blower.
Always follow the manufacturer's instructions and guidelines for the specific product you're using, as application methods and dilution ratios may vary. Additionally, ensure proper safety precautions, such as wearing gloves and eye protection, when handling automotive cleaning products.
Topaz Advanced Pre Wash Link: thetopazshop.com/products/ext...
Worx HydroShot 56bar WG633E Link: amzn.eu/d/aqp0NFo
Worx HydroShot 25barWG620E.6 Link: amzn.eu/d/8bBEOTC
Worx WA4036 Hydroshot Soap Bottle Accessory, Black link: amzn.eu/d/egyP3px
Worx WA4037 Hydroshot Turbo Water Nozzle Accessory, Black Link: amzn.eu/d/dbTY2T7
Worx WA4039 Pivoting Quick-Connect Adapter, Black Link: amzn.eu/d/c9JjCU9
Worx WA4013 Short Lance link: amzn.eu/d/6WoBf22
Power Of Topaz Pre Wash With Mains Water Worx Hydroshot 56bar Part 1
Please remember to Subscribe to my channel it’s free
▶--------Coffee or Help with cost of Products -------◀
If you fancy buying me a cup of coffee to help and support the channel, then here is the link :
www.buymeacoffee.com/autoglea...
All donations will go towards improving the channel. Thank you very much, Steve
Some Playlists :
Karcher Products Link : • Karcher Products
Worx Products Link : • Worx Products
Cleaning Products & Reviews Link : • Product Reviews
Cleaning & Detailing Link : • Cleaning | Maintenance...
Shark Cleaning & Products Link : • Shark Cleaning Products
00:00 Introduction
00:34 Topaz Advanced pre wash how to mix
00:48 How to setup Worx Hydroshot for main tap water
01:29 Applying Topaz Advanced pre wash
02:29 How to remove Topaz Advanced pre wash
03:01 You may need the 15 degree nozzle tip
04:11 What is my thoughts on the products ?
05:51 Testing out 0 degree red nozzle tip just to see if it helps
07:01 This is what the van looks like dry, What do you think ?

[@pigeonpoo1823]

Ive happily used KC Green Star and both Bilt Hamber's (through pump sprayers and without a foam on top) and easily got the car mostly clean with the boggo Hydroshot, let alone the Nitro. My car always has an LSP on top, but even still the topaz looks pretty useless. Good to see though, thanks

[@AutoGleamTruths]

I have my pump sprayers now. They turned up yesterday, I am looking forward to testing out, yes, that Topaz Pre Wash full price is £44.00 half the power for half the price £27.00 😀 weather is too poor to for making the topaz Advanced snow foam, which I really want to see again very expensive product but I got it Christmas sale half price, I have been wondering if topaz products are only for power washer like Karcher or so 😀 I am sure by the time I get though the box 📦 Topaz the company may not be happy with honest opinion review 🤣 laters Steve

[@GJX-xy7dm]

Where do I get the green connector for the hose into the hydroshot ?

[@brianleslie8371]

Good review as always. I use the Valetpro citrus prewash. Works great with the Hydroshot. I’d say that product isn’t up to the job.

[@crazybaker1]

Thanks mate 👍 I have wondered if there is any real difference between them all, I think I have that one, I am going through topaz products as I am thinking they are more expensive than most, but not really seeing any better than something half the price products 😊

[@AutoGleamTruths]

Next test is Topaz snow foam shampoo, it's double the price of autoglym Polar foam 😀