Topaz Snow Foam with Worx Hydroshot 56bar Part 4

The WORX HydroShot 56 bar pressure washer is a portable and versatile cleaning tool designed to tackle a variety of outdoor tasks with ease. With its lightweight and compact design, it's perfect for washing cars, cleaning decks, patios, and driveways, or even watering plants. Its 56 bar pressure ensures efficient cleaning power while still being gentle enough for delicate surfaces. Plus, its battery-powered operation allows for cordless convenience, making it ideal for use anywhere around your home or on the go.
#insta360 #detailing #insta360acepro
@TopazDetailing
'Effective' - Luxuriously Thick Foam effectively loosens dirt. Safe pH-neutral formulation.
Topaz Snow Foam has a Luxuriously thick foam that was designed to facilitate a safe,
scratch-free wash. Evenly spread foam clings to the paintwork exceptionally well, effectively loosening dirt and road grime. Its pH-neutral formulation is wax and coating friendly and suitable for regular use.
Bottle and cap plastic - widely recyclable.
DIRECTIONS: Snow Foam Lance - Add 100-300ml of product to a 1L foam lance bottle and fill the rest with water. Hand Pump - Add 15-60ml of product to 1L of water. Adjust the feed rate to suit the level of foam required for optimum results, foam the entire exterior of the vehicle and allow it to dwell for 5 minutes. Rinse off starting at the bottom of the car.
NOTE: Avoid using in direct sunlight and do not allow the product to dry on the paintwork.
Check out the video now on our 'How-To Guides' page for easy to follow step-by-step instructions!
Topaz Snow Foam thetopazshop.com/products/eff...
Topaz Advanced Pre Wash Link: thetopazshop.com/products/ext...
Worx HydroShot 56bar WG633E Link: amzn.eu/d/aqp0NFo
Worx HydroShot 25barWG620E.6 Link: amzn.eu/d/8bBEOTC
Worx WA4036 Hydroshot Soap Bottle Accessory, Black link: amzn.eu/d/egyP3px
Worx WA4037 Hydroshot Turbo Water Nozzle Accessory, Black Link: amzn.eu/d/dbTY2T7
Worx WA4039 Pivoting Quick-Connect Adapter, Black Link: amzn.eu/d/c9JjCU9
Worx WA4013 Short Lance link: amzn.eu/d/6WoBf22
Autobrite Direct Snow Foam Cannon link www.ebay.co.uk/itm/1142577674...
Please remember to Subscribe to my channel it’s free
▶--------Coffee or Help with cost of Products -------◀
If you fancy buying me a cup of coffee to help and support the channel, then here is the link :
www.buymeacoffee.com/autoglea...
All donations will go towards improving the channel. Thank you very much, Steve
Some Playlists :
Karcher Products Link : • Karcher Products
Worx Products Link : • Worx Products
Cleaning Products & Reviews Link : • Product Reviews
Cleaning & Detailing Link : • Cleaning | Maintenance...
Ford cars Vans etc link : • Ford | Focus | Escort ...
Shark Cleaning & Products Link : • Shark Cleaning Products
00:00 Introduction
00:16 one Bucket
00:28 Worx Hydroshot with mains water
00:54 Topaz Snow foam with Autobrite Cannon
01:45 one bucket wash method with wash mitt
04:14 Worx Hydroshot for removing foam
05:08 WORX NITRO 18V(20V MAX) Cordless Leaf Blower for removing water
06:03 using a microfiber towel for removing excess water
06:20 What do I think about Topaz cleaning products ?

[@TackyPrime_Editzz]

Hi would the glym polar blaster work?

[@AutoGleamTruths]

@TackyPrime_Editzz I personally think it better than Topaz, AutoGleam is a better price than Topaz. To be honest, Topaz is for rich men or ladies 😂🤣😅

[@steveo8533]

Does any 1/4“ quick release snow cannon fit the worx? I just bought the tool but I am looking for a decent cannon. Thanks.

[@AutoGleamTruths]

The only one that works out the best possible link in the description, but I am using this Autobrite Direct cannon for both Worx Hydroshot 56bar and Karcher. All I did was add the 1/4 adapter works for me, and you can see me using it in the video Laters Steve

[@waleedghanem3536]

I want to ask which foam cannon works with worx hydroshot WG633 710 psi

[@waleedghanem3536]

I bought chemical guys professional TORQ max foam8 foam cannon with specification work from 500 psi but not work well with worx WG633 710 psi

[@AutoGleamTruths]

@waleedghanem3536 Out of 10 different foamcannon, I have only 2 works well, 1st Worx foamcannon down side no adjustment and then you have to use alot of foam shampoo, Best one for me is the Autobrite foamcannon works great with full adjustment and less shampoo needed, also very important is the 1*foam maker and 1* fine needle; now in the one you have you can change the fine needle to different size, in turn better foam, this is different on some foamcannons which stop you from removing excess, hopefully this will help you 😀 laters Steve

[@waleedghanem3536]

@@AutoGleamTruthssorry do you mean worx foam cannon WA1740

[@AutoGleamTruths]

@@waleedghanem3536 WORX WA4036 Hydroshot Cordless Pressure Cleaner Soap Bottle Wash Spray Accessory

[@otherhumans6171]

@@AutoGleamTruths if I buy the autobrite cannon will it fit directly into my hydroshot? Or do I need to buy an additional connector?

[@ziaul12343]

Which foam cannon do you use please? Link

[@AutoGleamTruths]

Hi, if you check in the description under the video, there is a link to Autobrite enjoy laters Steve 😀

[@wamparker307]

​​​@@AutoGleamTruths the link for the autobright cannon states it's a karcher K connection would that work with the worx nitro washer or would I need any adaptors? As I did order one from ebay but it came with a nilfisk connector would it better to order the karcher one or can I change the adaptor on my nilfisk cannon easily to save me from sending it back

[@AutoGleamTruths]

@wamparker307 Karcher or the other has to be moved and be fitted with a 1/4" Quick Release, or was there an option for the Canon to just come with it, when I got mine the Karcher part was fitted and in the box came the 1/4" Quick Release connection adapter for fitting if required 😉 if not included Amazon or ebay amzn.eu/d/17XN11Q laters Steve

[@wamparker307]

​@@AutoGleamTruthsahhh OK might be worth trying to get the nilfisk adaptor off the cannon I just bought as might be easier as both ends are metal. I think most of the cannons for sale now have just one connection type and I'm hoping it ain't a ballache to get them apart. Thanks for the advice and link chap it's much appreciated. I'll keep you updated

[@AutoGleamTruths]

@wamparker307 your welcome, mate 👍