The Best Foam Cannon?

Definitely shocked by the results.
📽 PART 2 with MJJC Groits Updated MTM 👉 • The Best Foam Cannon? ...
Adams color foam 👉 adamspolishes.com/products/ad...
Adams Mega Foam 👉 amzn.to/3I9g92e
Product links
Make Model MSRP
AstroAI KFCWR $23 👉 amzn.to/450IYY8
Green Earth 5171 $24 👉 amzn.to/3xA9dbT
Tool Daily JT001-1 $30 👉 amzn.to/3Ogyw8W
Tool Daily #2 JT083 $30 👉 amzn.to/44WpMLf
Harbor Freight 58131 $33👉 www.harborfreight.com/premium...
ArmorAll E303511700 $50 👉 amzn.to/3W4W6aY
Adams Polishes MAC1031 $75👉 amzn.to/3MpoHnW
Chemical Guys EQP324 $100 👉 amzn.to/3nXyatg
MTM Hydro PF22.2 $110 👉 amzn.to/3Bpm4w4
1.0mm orfice 👉 amzn.to/43Xstfn
1.1mm orfice 👉 amzn.to/42IPqkh
DISCLAIMER: The links in this description could be affiliate links. If you purchase a product and/or service with the links above I could receive a small commission. This is not an additional charge to you!
Thank You! for supporting the channel, this helps in me providing new content each week!

[@Tools-Tested]

PART 2 with MJJC Groits etc kzbin.info/www/bejne/n4W0dZSiiqpohJI NOTE: AstroAI Spec sheet says 1.25mm office installed, mine actually measured just over 1.mm multiple times. It's hard to say if mine was a defect, but others are saying they are getting similar results with low PSI/GPM pressure washers.

[@le-johnny9236]

Thanks for being so scientific about this. I love how detailing community tests every product in real world scenarios so we don't have to waste money.

[@Tools-Tested]

No problem! Glad you found it helpful!

[@casmithc2]

Best comparison I have seen. Using the building for a flat surface is better than using a car. Comparing orifice sizes was interesting.

[@Tools-Tested]

Thanks, Yeah I wanted something consistent. Yep I think the orfice size is something that is commonly overlooked, but defiantly impacts the performance. Also most won't need or have a gas pressure washer so having the right orfice is key.

[@CC_Marauder]

Defiantly! 😉 TFS 👍🏻

[@TropTrevTv]

agreed

[@nidog]

This is bar none the best review of products I have ever seen for any product on YT. You were clear and to the point. Provided guidance on features to look for included a detailed chart with comparative features. Outstanding job. Thank you.

[@Tools-Tested]

No problem! Im glad you liked it and found it useful. Thanks!

[@irishuwould5185]

I think that’s the cleanest wall in the world

[@Tools-Tested]

Not anymore... round two coming soon.

[@daveballard8673]

Thank you. I have that Ryobi & an Adam's foam cannon in the mail. I'll return it and get the one you recommended. You saved me $50.

[@Tools-Tested]

No problem! glad it helped!

[@JimmyJ26]

Really great video. I really liked the use of the flat wall surface for testing how well each foam sticks. Cheers

[@Tools-Tested]

Thanks! yeah it worked out well, hope to test a few more this year in the same manner.

[@sturkfeld]

Hello. Your clear concise reviews helped a lot! Thank you.

[@Tools-Tested]

Glad it was helpful! No problem!

[@rauladame2105]

I really appreciate the detail in this video. It helps me to get one.

[@Tools-Tested]

Thanks! Glad it was helpful!

[@209lapko]

Your testing is greatly appreciated! Great info

[@Tools-Tested]

Glad to hear it helped! Thanks!

[@joetruth7823]

Thanks! Very thorough and I really appreciate you for saving me time and money!

[@Tools-Tested]

Glad to hear it help! Thanks for the support!

[@renaissancelaboratories5645]

I watched this 3 times and have bookmarked it. Very thorough review and covers a range of price prices. Thanks for this, Liked & subscribed! Oh and I ordered the AstroAI!

[@Tools-Tested]

Thanks! Glad to hear it was helpful! Thanks for the SUB!

[@princeshihot8583]

how is the astro ai?

[@thereason1010]

Excellent breakdown of some good budget and mid-range options. Thanks a ton!

[@Tools-Tested]

Thanks! Glad you found it helpful.

[@patrick_aitken]

guy has the cleanest side of a garage in the history of buildings.

[@Tools-Tested]

lol yep

[@patrick_aitken]

I also got your recommended Astro foam cannon product as well. good video appreciate it. @@Tools-Tested

[@Tools-Tested]

Nice, glad to hear it helped!

[@skent]

Great video! Used your link to buy the AstroAI. Thanks for the awesome review!

[@Tools-Tested]

Thanks! Glad it was helpful and thanks for the support!

[@GeoRides114]

Great video, I went with a Tool Daily recently. Can’t wait to use it.

[@Tools-Tested]

Nice should work well!

[@BeingRomans829ed]

Ya sold me. Just got on the AstroAI website and ordered one. Thanks!

[@Tools-Tested]

Glad to hear it was helpful! No problem!

[@princeshihot8583]

how is the foam cannon?

[@scmtkings4]

thanks for the video. this was super helpful!

[@Tools-Tested]

No problem! Glad it was helpful!

[@GeoRides114]

Nice comparison video especially with a consistent surface that you’re testing against.

[@Tools-Tested]

Thanks! yeah I think it helps testing them on a consistent surface.

[@adoidont]

Great stuff man, appreciate the video. And glad you brought up the orifice fact, had no idea that was a thing.

[@Tools-Tested]

Thanks, no problem! Yeah I didn't know either until I started doing research on them. Interesting to see the difference with the electric pressure washer.

[@Tools-Tested]

NOTE: AstroAI Spec sheet says 1.25mm office installed, mine actually measured just over 1.mm multiple times. It's hard to say if mine was a defect, but others are saying they are getting similar results with low PSI/GPM pressure washers.

[@Gaming_Biker]

Can confirm your’s is a fluke. Bought the AstroAI & mine came w/ a 1.25mm orifice. It doesn’t help that AstroAi Direct on Amazon is telling most people 1.1mm in the Q&A section, but then also says 1.25mm to some & the product came w/ a 1.25mm for me.

[@sullygtx9350]

I replaced the AstroAI orifice with a 1.1mm and saw no difference in the foam so I'm thinking mine did in fact come with a 1.1.

[@CC_Marauder]

#FChina #FAmazon Problem solved

[@kristofferpence]

I went to change mine to a 1.1 and the installed one looked even smaller. Crazy to see, but im not mad. They also told me it was a 1.1

[@king_Charles501]

Only good multiple foam cannon comparison on KZbin. Hope you do another thanks

[@Tools-Tested]

Thanks! Hopefully part two will be out Sunday, took tomorrow off from work.

[@Yournumberonetool]

Thanks for the comparison. I bought because of the video.

[@Tools-Tested]

No problem! Glad to hear it helped!

[@cdotwu]

Great review! Would love to see more car detail content!

[@Tools-Tested]

Thanks! I will try and add some more in!

[@PrincernPrince]

You helped me big time thanks!

[@Tools-Tested]

Glad I could help! No Problem!

[@taguilera79]

Not sure what model armor all you have but mine foams up great, able to change from horizontal to vertical. Using ryobi electric pw

[@casmithc2]

Great test. You put a lot of thought into this!

[@Tools-Tested]

Thanks!

[@rangerdalexp6221]

MJJC v2 would have been the top dog in this test. I have two after so much research. Also on the Harbor Freight. I have two as well and the best mod is the 1.1 needs to be installed. I use a AR630 pressure washer which helps as well.....

[@Tools-Tested]

Yeah is missed MJJC, hopefully I can test the V2 and V3 next year!

[@Gumshoe88]

Got mine at HFreight, works great and if it ever stops, its inexpensive enough to get a replacement. 😉

[@soggyfries4347]

You must try the Ridge Washer foam cannon - $20 and comes with a nice wash mit. Its the green label and comes with a 1.15 orifice. I'm getting amazing foam with the Ryobi 1800 psi electric pressure washer. I'm talking gas pressure washer - like foamage from this thing. Its a sleeper of a foam cannon.

[@Tools-Tested]

Will do thanks for the info!

[@marls10191]

Can you use a wireless Ryobi and get the same results?

[@soggyfries4347]

@@marls10191 Well I hooked it up to my gas Ryobi and far exceeded the results, so yes.

[@DerekGH]

Do you have a link for it?

[@henri6595]

Great video! I think I'll pickup the new MTM Hydro foam cannon. I have the 1st gen version and used it for about 4- years, 100s of times. Best quality stuff you can get from MTM!

[@Tools-Tested]

Thanks! Yeah the bottle is defiantly a big improvement on the new MTM. Yep I agree 100% if your using it a lot, hard to beat MTM products!

[@magictoaster806]

Keep the old one and just buy a new bottle! They’re pretty much the same thing

[@henri6595]

@@magictoaster806 Wish I saw your comment before I got the new model! Basically are the same things but the bottle 🤣

[@1702jtma]

Great video....do you know which one that can spray up to 10 meters high up?

[@Tools-Tested]

Thanks, I don't think any would reach anywhere near 10 meters, probably 3 max.

[@Aaron86v]

Awesome video, thanks

[@Tools-Tested]

Thanks! No problem!

[@WhiteVaille]

Why do you prefer plastic-on-plastic as opposed to brass-on-plastic? I'd think that brass is always desirable for longevity. Does it tear up the plastic jug's threads? Not a video topic I would have thought of, but thank you, as always! I don't really know anything about this product segment - it's actually something I was just telling myself a few days ago that I'd likely avoid DIYing most detailing work, but then, I'm debating if I shouldn't dismiss it so quickly, until I at least look at pricing on starter kit. This test certainly helped give me something to consider! Glad to see that a cheap tool gets the job done so well!

[@WhiteVaille]

Paint and body work makes me nervous. Seems like a lot of complicated, touchy stuff, that's almost more art form and nuanced, rather than clear-cut and technical, the latter of which I'm more comfortable with. I certainly admire the work and setups at AMMO NYC and Obsessed Garage, but I'm really not sure how deep down those rabbit holes I want to play.

[@Tools-Tested]

Yeah the plastic threads can get damaged screwing into brass, not a major deal if your careful. I had a few requests to do one last year, but I for the life of me couldn’t find the harbor freight version in stock until a few months ago. I agree, detailing and doing any kind of body work is a art. Definitely when it comes to paint matching. I watch obsessed garage, his ocd is crazy. I can’t ever seem to buy anything in perfect condition to start with lol. Yeah I was shocked the cheapest one 🏆, which I agree is a win.

[@TropTrevTv]

9:26 tool daily - I really wanna see more of this one , been looking at getting the MGGC but with that price point if it can be close I’m down, it looks cool too

[@KingDaDetailer]

The tool daily # 2 works good when you change the orific to a 1.1 foams like crazy, the only problem I have with them is the bottle is cheaply made and broke on me now I can’t find a replacement

[@Tools-Tested]

Yep that seems to be the common complaint with the tool daily.

[@strykerentllc]

MJJC Foam Cannon Pro V2.0 is awesome and can be had for less than $80

[@Tools-Tested]

Yeah I need to test that one at some point.

[@samidpersia9832]

Thank you for the amazing comparison and I will def buy the tool daily foam canon with my Ryobi 1.2 PW Electric . But can you suggest something affordable wand too sir? like the short Quick connect wand?

[@Tools-Tested]

No problem! Wands I currently cant speak for, I only have the MTM. At some point I would like to review and test some but it will be a while before I can.

[@dolebanana5071]

MJJC Foam Cannon OPTIMAL

[@MJJCvideo]

Hello, the new MJJC foam cannon S V3.0 have released,may I know if you like to review it? Thanks!

[@MichaelHardestySr-rj6mn]

Great comparison wanted to know. Can you use a hose set of on any of these? Or do you need to have the electric or gas pressure washer? And if you can use a hose Does it do a decent job

[@Tools-Tested]

Thanks! all except for the armorall you will need a pressure washer. I couldn't get the armorall to work with or without a pressure washer. That being said others claim it works, but I can only speak from experience.

[@santhiagovillela1586]

Good video! Thank you

[@Tools-Tested]

Thanks! no problem!

[@cue03]

That is a crazy setup you have there between the gun and the pressure washer hose. Can you elaborate on that setup etc?

[@Tools-Tested]

It's just some hydraulic fittings, a flow meter for water and a digital pressure gauge, with a MTM gun. That way I could get the GPM of the pressure washers and also working pressure at the same time using the same tip.

[@pittmanx6]

Can you use a 1.1 oriface safely with a gas pressure washer? I have an old(ish) craftsman that I would like to utilize and the AstroAi is looking like the ticket. Thanks!

[@Tools-Tested]

No shouldn't be an issue, it should actually foam better.

[@paulrod53]

Hey when you say 1.1 orifice for electric pressure washer, is that good for 2700 psi electric pressure washer?

[@Tools-Tested]

Yeah I would still use the 1.1 for the best foaming.

[@JimE6243]

Like the SBR reference. But you don't have to send the ATF 200 bucks! JimE

[@Tools-Tested]

Lol I was waiting for someone to catch that. Yep no need for a check to the ATF.

[@JimE6243]

@@Tools-Tested "I was waiting for someone to catch that." That took long enough.🤣 I'm 81 so I can remember life before the ATF when things were a hell of a lot better. We were able to go to Sears, Wards hardware stores and the like or getting their catalogs and having things sent to our doorsteps. No one thought a thing about it. Every pickup truck in the high school parking lot had a rifle rack full in the back window. And we left the doors unlocked. 2A was just a part of life since I was 8 years old. From my point of view, we have gone backwards dramatically in the freedom and live life to it's fullest categories. So sad!! Go 2A!! Thanks! JimE PS: I did buy the AstroAl for house washing.... I hope.

[@MrBofficial0913]

For the AstroAI orfice is it 1mm? 1.1mm? Becasue im trying to look at the comment it says 1.1 and 1.25 im so confused

[@2020Tundra]

Hey, the side of your building should be REALLY clean now 🤣😂. After watching this video, I became a subscriber!! Thank you

[@Tools-Tested]

Lol yeah, the worst part is I had to do it almost twice because of the glare when the sun came out. I didn't notice it until editing the video... Thanks for the sub!

[@byseven]

Thanks !!!

[@Tools-Tested]

No Problem!

[@marlondeere3039R]

Was looking at electric washers earlier today. But the 2500to3200 psi ones. 👍

[@Tools-Tested]

Nice, I'm actually shocked how well the cheap Ryobi did. At some point I would like to test electric pressure washers. How's your 30g doing? I'm almost at 500hrs.

[@marlondeere3039R]

@@Tools-Tested little under 300 now. Not any problems but wish the common complaint of a/c was better. Did Deere come through on the tractor issues?

[@Tools-Tested]

@@marlondeere3039R Nice, yeah I agree AC could be better. I was going to look at adding some refrigerant but I haven’t had a chance to put gauges on it. No tractor kinda been a disaster, finally got the brake valve fixed. The dealer has been cycling through service mangers after the buyout. I think they are on #5 in two years… Deere never came out on changing the wiper and stuff but like a month or so after that call they stopped making the 5r. So yeah dealing with my dealer has been challenging to say the least. FYI I moved the outdoor videos to a new channel. Beaver Creek Acres

[@marlondeere3039R]

@@Tools-Tested thanks didn't know that I will definitely check it out and take care.

[@shironekkogami]

​@Tools-Tested I owned 2 Ryobi electric PW and threw them away. Failing GFCI plug, Weak pump not keeping pressure, to full out failure. I just picked up the Chemical Guys PW. I hope this one lasts longer than 3 to 6 months like the ryobis.

[@johndesmet7527]

I have a maybe dumb question, but can the Astro be mounted to a karcher high pressure washer, or do I need to order an adapter for it? Thanks for letting me know

[@Tools-Tested]

Hard to say Karcher make different washer with different wands, it its a twist lock though u will need an adapter or different wand.

[@MrKiyo15]

Yes! Great video! Try the MJJC Foam cannon Pro V 2.O

[@Tools-Tested]

Thanks! Will do!

[@emranmde]

It’s 90$ 😢

[@squiby8814]

How do you feel about the overall durability of the ASTRO? I have 8 technician work vans to keep clean

[@Tools-Tested]

Heavy use I would go with the MTM personally, Astro is more DIY. But for the price the Astro might be worth a shot.

[@johncooper2790]

Can you please post a link to buy the 1.1 orifice? Great reviews!

[@Tools-Tested]

Thanks! I added the links in the description.

[@teddsandman5536]

I just purchased the Astro AI and it came with a 1.25 orifice installed. There wasn't another one to change it out to. I was disappointed because I went off your recommendation and it didn't come with a 1 like you said but a 1.25.

[@Tools-Tested]

Maybe mine was an error, I know it measured 1.03mm with my gauges while the manual says 1.25. I will probably order another one next year and see if that one measures the same.

[@MJJCvideo]

@Tools Tested A good video this is,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺

[@Tools-Tested]

Thanks! I bought the MJJC v3 a few months ago, just waiting on the weather to warm up.

[@MJJCvideo]

So good dear@@Tools-Tested

[@adamg.1845]

Couple of things. What’s the big deal about swapping to 1.1 orifice? It’s like $9. Also, any thoughts on the active 2.0?

[@Tools-Tested]

So if its being used on an electric pressure washer it will likely need the 1.1 so it foams vs runny suds, this is because most electric washers have a lower psi and gpm. I did look at the Active 2.0 pressure washer, looks like a sold unit. But hard to say performance wise without testing it. You might check out Obsessed Garage if u haven't already, Mike's testing is thorough. kzbin.info/www/bejne/eYfSgminrsurq9k

[@TayagChinoska]

Amazing video.

[@Tools-Tested]

Thanks!

[@DerekGH]

I bought the Astro Ai one and changed to a 1.1mm orifice. I'm using Chemical Guys Mr. Pink. I'm still not getting really thick foam. Could my gas pressure washer be too powerful? 2200 to 2900 PSI and 2.3 GPM.

[@Tools-Tested]

I don't think the pressure washer is too powerful. I would try a higher concentration of soap if you haven't already, maybe run strait soap and see how it performs. Also might turn the adjustment in the opposite direct and see if it changes anything. I remember some of the ones I test they seemed to be labeled wrong on the nob. If that dousing work maybe you received a defective one, with that flow and GPM you shouldn't have an issue.

[@DerekGH]

@@Tools-Tested thanks so much. I'll give it a try

[@princediesel1]

Should I use a 1.1 with a gas washer , or should I use 1.25 ?

[@Tools-Tested]

Normally with a gas pressure washer the 1.25 will work good, if you would like it to foam a little more than I would install the 1.1.

[@DumbDogIsDumb]

This was an excellent video. Learned a lot about what to look for in a cannon and also about some brands worth looking at. Thank you

[@Tools-Tested]

No problem! Glad to hear it was helpful!

[@bicmanflame3455]

I have a Black&Decker 1300TD , I don’t know what fits it from snow foam bottles , can someone help ? 😢

[@skecherskid6412]

Is the 1.1mm office the way to go or

[@Tools-Tested]

Yes typically it will produce better foam with the 1.1.

[@MrClaus]

Can these things use Dawn dish soap or Ajax soap?

[@Tools-Tested]

I wouldn't see why not, just would probably be more like a soaper vs producing thick foam.

[@MrClaus]

@@Tools-Tested I ended up borrowing one of my Friends foam cannon for pressure washer. The dish soup foamed up like snow it was beautiful.

[@agent4127]

I just bought the AstroAI from your link, but unfortunately it came with a 1.25mm orifice. I'll just have to buy a 1.1mm.

[@Tools-Tested]

That’s interesting see I bought mine from that link.

[@fabio3079]

Dovresti provare la foam gun MJJC S v3.0...attualmente una delle migliori foam gun presenti sul mercato😉

[@jjolsness2593]

Amazing video I wish you reviewed everything 😂

[@Tools-Tested]

Thanks! maybe someday!

[@sullygtx9350]

9:55 You'll also need a tax stamp for that sbr conversion lmao

[@Tools-Tested]

Your the first to comment on that lol.

[@sullygtx9350]

@@Tools-Tested If you know, you know. Only 3% of us will get the joke.

[@GTPRIME209]

I’m going to try the AstroAi. It’s on sale, so why not.

[@Tools-Tested]

Good value for the $ IMO

[@jordangarside]

I ordered the AstroAI and it looks like it comes with a 1.25mm inner core diameter according to the manual. It works well with my electric Ryobi pressure washer regardless.

[@Efungable]

Damn really? Do you have photos? I was gonna buy the Astro as well until I saw this comment.

[@gabewilson7621]

I’m about to pull the trigger on the AstroAI. I have a electric Ryobi 1900.

[@jordangarside]

Couldn't post a link, but I get the same performance he got in the review. I'd recommend it, especially for the price.

[@Tools-Tested]

Yeah spec sheet says 1.25mm, I actually measured 1mm. Im guessing they changed it and never updated the manual.

[@renaissancelaboratories5645]

Thanks for following up on this. Just ordered the Astro

[@nyacoustics8373]

so basically the cheapest cannons took the prize lol

[@Tools-Tested]

Yep

[@curbdog808]

The backside of your shop is clean AF

[@Tools-Tested]

lol yep

[@MrClaus]

Oh yeah I think any of these will kill the box elder bugs I have in my backyard.

[@brianbertine7037]

This comment is for Tools Tested. The AstroAI guy I talked to on the phone read the manual and said the orfice size must be 1.25 and wondered where you got the 1.0 information.

[@Tools-Tested]

Yes the book says 1.25, but mine was around 1.0. I used a drill hole sizing tool. Without ordering another one I can’t say If it was a error or if that’s how they all are coming now. But mine is definitely not a 1.25 or even a 1.1.

[@Nakoda4224]

Of course i just bought the chemical guys and it comes in last place.....nice

[@jimmyswag3413]

😂

[@Tools-Tested]

It worked well and the build quality was nice. It just was way more expensive when you look at the features vs the rest.

[@Nakoda4224]

@@Tools-Tested I Used it to wash my camper and was pleased with results. I agree there is others that cost less and would have performed just as well. great video on the cannons I think you are right on with the results!

[@Charlie-lx9mg]

Chemical guys is just a glorified monetizing company of poor quality products. Ever wonder why they have so many variations of the same type of product?

[@ataylor073]

Why is mine so runny. 1.1 value gas pressure washer 2900 psi. Chemical brother foam cannon.😢😢

[@Tools-Tested]

Interesting maybe try different soap or high concentration of soap.

[@giant23]

I've got the astro one with a 1700 psi electric washer, it always comes out runny even planning with the settings 😖

[@arnestufek7062]

Do u have a 1.1 mm orifice?

[@giant23]

@@arnestufek7062 I don't know haven't checked

[@Tools-Tested]

Hmm and its the same one as I used in this video? if so maybe try a different soap, it should already have the smaller orifice in it.

[@joeycameron4744]

I bought the Astro one and the same Ryobi electric pressure washer he uses here. I knew from day 1 that the orifice needed to be changed to a 1.1 in order to get the thicker foam. I did try with the original just for my own knowledge and yes, changing the the 1.1 made a the foam much thicker.

[@giant23]

@@joeycameron4744 hey thanks for the reply ill be sure to swap it out for the 1.1

[@Montoyajdm]

Astroai vs Sooprinse?

[@Tools-Tested]

I will add it to the list, but probably won't be until next year before I test them again.

[@winner1604]

Why didn’t you include the MJJC cannon

[@Tools-Tested]

Was at my budget for the video, I will be testing the MJJC in round 2 once the weather clears hopefully in a month.

Do It like a pro nação detail!

[@JRGV_828]

STOP STOP 😭 JUST STOP . . . It’s already clean!

[@LuxAudio389]

🍻👍

[@Tools-Tested]

Thanks

[@BrianAz]

Greetings~ Great review but as I am brand new to this, I am indeed the village idiot. So, when I choose a pressure washer, either electric or gas, does the spray handle that comes with all the pressure washers work with these cannons? Do you just detach the nozzle from the handle of the pressure washer handle/trigger and attach the cannon to it? Thanks in advance. P.S. Are you going to make a video testing pressure washers soon?

[@Tools-Tested]

Thanks, So some electric pressure washers have a twist lock instead of the quick disconnect. Also a good amount of pressure washers the hose is not removable from the wand. All pressure washers come with a mid to long range wand, none come with the small pistol style because so some weird law. Hope to test pressure washers in a few months, still to cold here in the north east.

[@gregwallace6159]

MJJC #1

[@Tools-Tested]

I hope to test it next year!

[@VulcanXIV]

Neither your description link or comment link for the part 2 are correct

[@Tools-Tested]

Sorry for that, fixed now. Thanks for letting me know!

[@sidneybristow815]

You are so funny when trying the crappy ones! Gas is just more fun, right?

[@Tools-Tested]

Lol I wasn't expecting some of them to be that bad lol. Yeah the gas pw works well.

[@bitlikethat]

Be good if reviewers just used a hose…

[@sn4rl277]

@0:51 - Ryobi Soap Applicator @1:01 - Armor All Garden Hose @1:08 - Armor All Electric PW @1:17 - Armor All Gas PW @1:29 - Green Earth Electric PW @1:36 - Green Earth Gas PW @1:42 - AstroAI 1mm Elec PS and Gas PW @2:00 - Tool Daily 1.1 Elec PW and Gas PW @2:19 - Tool Daily 1.23 Elec PW and Gas PW @2:29 - Tool Daily 1.25 Elec PW vs 1.1 Elec PW @2:50 - Harbor Fright 1.25 Elec PW vs Gas PW @3:00 - Harbor Fright 1.25 Elec PW vs 1.2 Elec PW @3:20 - Adams 1.25 Elec PW vs Gas PW @3:32 - Adams 1.25 Elec PW vs 1.1 Elec PW @3:53 - Chemical Guys 1.1 Elec PW vs Gas PW @4:14 - MTM 1.25 Elec PW vs Gas PW @4:25 - MTM 1.25 Elec PW vs 1.1 Elec PW Worst Case Scenarios @4:55 - AstroAI 1mm and 100% Soap Elec PW @5:00 - Tool Daily 1.1 and 100% Soap Elec PW @5:05 - Tool Daily #2 1.25 and 100% Soap Elec PW @5:11 - Tool Daily #2 1.1 and 100% Soap Elec PW @5:16 - Harbor Fright 1.25 and 100% Soap Elec PW @5:23 - Harbor Fright 1.1 and 100% Soap Elec PW @5:30 - Adams 1.25 and 100% Soap Elec PW @5:35 - Adams 1.1 and 100% Soap Elec PW @5:40 - Chemical Guys 1.1 and 100% Soap Elec PW @5:45 - MTM 1.25 and 100% Soap Elec PW @5:51 - MTM 1.1 and 100% Soap Elec PW @5:57 - Adams Color Foam @6:20 - Final rankings Like and Pin

[@ccbowers]

Why are people buying/using these? It seems there is a lot of misunderstanding and marketing hype driving the increased popularity of these.

[@Tools-Tested]

Yeah they help but you still have to hand wash if its really dirty.

[@ccbowers]

@@Tools-Tested Help with what? These soap cannons use a lot of detergent and have fairly narrow use cases compared to what people are using them for. If people are using standard neutral detergents in these and using them every time they are washing their vehicles, that's just a win for the detergent manufacturers.

[@raymonddonovan3297]

I have no idea. The KZbin propaganda pushes the shorts of people spraying soap foam on their cars… with no commentary… and I have not figured out what the point is.

[@ccbowers]

@@raymonddonovan3297 I have heard of various rationales, but few of them make sense or are convincing. The ones that make some sense are niche uses for mostly detailing folks, and not for everyday use

[@CaptainBreny]

Because foam is sexy and thats good enough for me :D

[@alexanderfurman4329]

Tried the Tool Daily large per your recommendation, WHAT A POS!!!!!!! i don't understand how you could say "I'd give it number 1!!!! Tried with electric 1800 PSI 1.1 and 1.25. Tried it with 3600 PSI gas 1.1 and 1.25. Real bad! What is interesting, the electric gave better results, like on scale from 1 to 10 it was somewhere 5 where with gas it was 3. In short, real bad, waste of money.

[@georgef1176]

None.. I never use my cannon.. I use a pump foamer.

[@tommyhorne1039]

Mine was a whole lot better than that! You are just trying to sell a brand you like or getting paid for!

[@Tools-Tested]

Lol I don't do sponsored videos, I bought everyone of these with hard earned money from my full-time job. MY test results are not altered in anyway. Thats how they performed for me, is it possible I had one that was defective yes.

[@Auto-Bots.Custom.Detailing]

Why are you using car care products on your barn??? Don’t see the correlation there…

[@chrisjames5254]

you say the astro ai has a 1 orifice but it is advertised and came with 1.25, What gives , Is this going to change performance and can the orifice be swappped

[@Tools-Tested]

Instructions state 1.25mm but I measured just over 1mm, actually measured it multiple times to conform the 1mm reading. I need to order another at some point to conform mine wasn't a defect. Im guessing they changed it, but didn't update the info.

[@teddsandman5536]

How do you measure the orifice? What's the best way? I know I left another comment saying I was disappointed when I bought my Astro AI and the instructions said it has a 1.25. I really wanted to get the 1 after seeing your review. I will say it was a great review and I learned a lot so thank you for making it. Please reach out to me and let me know what the best way to measure mine to see what I actually have.

[@robertbrinkley8532]

There is a new version of Astroai with the 1.25. The new version has a brass looking cap and the original with a 1.1. has a black cap.