Topcon Ls-b200w machine control receiver.

[@RockCreekEnterprisesNM]

Very cool Frank Frank. I definitely need to update my receiver. That is a supper nice one. I like the tripod too😍 You should have seen my set up today with the receiver post tie wired to the skid steer bucket 🤦‍♂️🤣🤣 but it worked

[@Digginok]

I would have liked to seen the setup, sounds like it works!

[@RockCreekEnterprisesNM]

@@Digginok it worked, but it was ugly. I'm trying to figure out a good way of mounting a pole to the skid steer bucket, it really needs to be at the cutting edge🤷🏻‍♂️

[@Digginok]

@@RockCreekEnterprisesNM I have seen some guys build an offset pole from the back of the bucket, maybe worth a try?

[@knoxmosby9776]

What’s up with the ole TD15? Looks major! Do you have a good source for undercarriages up there ? I’m hunting an used set of track groups for a td15-B.

[@Digginok]

We have a new set of bottom rollers, sprockets, rails and pads for it. The rails are pretty much done off this one. We may have some decent bottom rollers left over.

[@albertmcalister9066]

You made a comment at the end of your video about leaning on your tripod, as if it had thrown it out of level. I was working on a job once where they were setting concrete forms, and the ground was spongy, and it was pumping when you walked on it And they were having a heckuva time keeping the transit level. They finally figured out that the ground was moving every time somebody walk past the tripod. They dug three post holes about 2 1/2 feet deep and put sacrete in them to set the tripod on. Half the forms on the job were off grade.

[@Digginok]

Yeah I have talked to guys that do robotic layout, they say that if you set an instrument on asphalt the heating from the sun can move them too! Just gotta be aware.

[@trickmytractor7187]

Awesome setup

[@Digginok]

Thanks! I think I will enjoy using it.

[@Jpaydirt]

was this the ones we were looking at conexpo

[@Digginok]

No that was a gps. Not sure I even visited with topcon out there.

[@waynevincent5448]

Really nice Frank, Lot's of features. I really like that stick plumb setting, would be really handy for the backhoe. With that single slope laser, when you set the slope, how far left or right can you be ?

[@Digginok]

I have used the slope off to the side a hundred feet or so, not sure what the limit is.. it’s usually close enough for drainage work parking lots and such.

[@FlanaganFarm]

Can u set a depth

[@lakepinesfarm1394]

That is some neat features on receiver, they have come a long way. You may be the only one in the world using that technology on a td8. Can’t wait to see the wife’s iPad mounted to rops. 😂

[@Digginok]

Yeah no doubt! Can’t wait to run it on the 930 and box blade, I gotta find a iPhone mount for a tractor! 😂

[@rickh7170]

Would that receiver work with any laser?

[@Digginok]

@@rickh7170 I believe it will work with most red beam rotary lasers

[@rickh7170]

@@Digginok Thank you

[@axe609]

Would a rubber or polyurethane pad under the pole mount help or worsen vibration?

[@Digginok]

Possible, I may try that

[@13eckerlosmuerte]

Fill the pole with foam

[@diggerdave51]

Good video, Sir. I like my Topcon RL-H5 ! and i really like the new tripod who makes it ? Your friend from Michigan !!!

[@Digginok]

I bought this stuff from contractor tools in Texas. I think it’s a spectra product, I’ll check for sure when I get time. Thanks! Edit* it’s a site pro. www.contractors-tools.com/sitepro-fgc20-elevator-tripod-heavy-duty-composite-49-to-119-inches-extended/

[@diggerdave51]

@@Digginok Thanks, I'll check them out !!!

[@scottnunya1]

I assume you could use a tablet with bluetooth so you have a bigger screen?

[@Digginok]

Yes the app works with Apple and android devices. A rugged tablet might be a better choice

[@leojunior7589]

First like frank😁here from Brasil🇧🇷 A curiosity Frank how much does this device cost🤔

[@Digginok]

Thanks! Around 2000$ us. There are a lot of different types and brands that are cheaper.

[@Buzz407-]

Fill your pole with some sand and weld a cap on. Should get rid of the vibration.

[@memyselfandifarmer]

C cell? The only use of c cell is the wife.

[@Digginok]

That’s funny! 😂

[@jimdorman1550]

You will love it. But, the main control, is still in you. And you can ignore the slope, just ajust to your light pattern. Run a simple one for years.

[@Digginok]

Hopefully it works out, I understand what you are saying. Tech is getting cheaper, fuel isn’t.

[@jimdorman1550]

@@Digginok I gotcha. I was kinda saying, it is cool and you can simplify what you are doing with it. But it's still in the seat of your ass. Hahaha

[@Digginok]

This one having 360 degrees of pick up will make life easier for me, the old one I used took a lot of planning to use. I figured if I was gonna upgrade I’d get the latest stuff.

[@theDozerman88]

Maybe fill the pipe with sand?

[@Digginok]

Not a bad idea!

[@theDozerman88]

It helped with a pedestal grinder. Cutting vibration