1500MX Installation - Unboxing through Operator Console - Part 1

  Рет қаралды 6,865

Tormach Inc.

Tormach Inc.

Күн бұрын

Пікірлер
@BrilliantDesignOnline
@BrilliantDesignOnline 7 ай бұрын
A very realistic assembly, complete with unapologetic goop smearing. Definitely want to get a 1500MX.
@tormachinc
@tormachinc 7 ай бұрын
Thanks! We almost cut out the, "'cause you're gonna need them" part because it was a little goofy, but we also really wanted to emphasize the cleanup. What would you do with a 1500MX if you got one?
@BrilliantDesignOnline
@BrilliantDesignOnline 7 ай бұрын
@@tormachinc I would do it exactly like you did; I would pre-position each part to understand the contact areas to predict the squish, before committing to apply the Sikaflex. But sealing against coolant leaks is imperative, but it will be messy any way you do it. I highly prefer doing it myself, especially if it save some money, and I have no questions if it was done right. The custom shipping pallet is very clever too.
@tormachinc
@tormachinc 7 ай бұрын
@@BrilliantDesignOnline With this method we just had the tiniest leak at one of the rear chip chutes, and it took less than a minute to fix. We also felt it was important to show what would happen with too much Sikaflex. Our solution worked well and we hope it's easy for all the self-installers out there. We also felt it was important to develop a pallet method that didn't need a sawzall.
@lephtovermeet
@lephtovermeet 7 ай бұрын
Tormach makes great machines at great prices.
@tormachinc
@tormachinc 7 ай бұрын
We try our best to keep the price as low as possible, while delivering the best machine we can. Our founder would have been very proud of the 1500MX.
@lephtovermeet
@lephtovermeet 7 ай бұрын
@@tormachinc they're so good for intro level job machines, small shops, maker spaces, light manufacturing etc. I learned to CNC program and operate on a 770, loved it. Hope some day I can have enough garage space to have one for myself.
@WildcatCustom
@WildcatCustom 7 ай бұрын
Excellent video! Nice work. It seems like a lot of thought even went into the packaging!
@tormachinc
@tormachinc 7 ай бұрын
We reiterated the pallet many, many times to get it right. In fact the quality team descended on this machine as well to make more improvements.
@tonerduckpin
@tonerduckpin 7 ай бұрын
Yeah! Unboxing video.
@tdg911
@tdg911 7 ай бұрын
Really nice looking machine. Makes me want to sell the 1100MX and get the 1500MX.
@tormachinc
@tormachinc 7 ай бұрын
They look pretty good side-by-side too. Just saying. But if you have to make sure it goes to a good home.
@Anatheme-
@Anatheme- 3 ай бұрын
Do you make solid risers so the machine can be bolted in place?
@dejanvanevski4399
@dejanvanevski4399 6 ай бұрын
What are the improvements of the mx1500 compare to mx1100 in the mechanical meaning
@tonerduckpin
@tonerduckpin 5 ай бұрын
When is part 2 coming?
@MatthewFeeney-d9o
@MatthewFeeney-d9o 2 ай бұрын
Hi! Do you have an estimate of time that the enclosure took to assemble with two people?
@tormachinc
@tormachinc 2 ай бұрын
For just the enclosure, around five hours.
@feendos
@feendos 2 ай бұрын
Thanks so much! Next question, when the machine is landed, how much time do you estimate it will take complete the process? I am specifically trying to figure out if it’s worth it or not to pay for the assembly or not.
@tormachinc
@tormachinc 2 ай бұрын
@@feendos It depends on the accessories and the skills of the installers, we'd estimate two eight hours days for the basic install with the coolant tank. Then add more time for the ATC and MQL systems.
@MatthewFeeney-d9o
@MatthewFeeney-d9o 2 ай бұрын
@@tormachinc One more question. I have pcnc 1100 with a tool setter. The only option on the 1500mx I see is the wireless probe and tool setter. What option do you have for a tool setter if you don't go with this option?
@richardroffers2530
@richardroffers2530 5 ай бұрын
I wonder if butyl tape (used in RV assembly) would be a better solution than the messy caulk job...
@tormachinc
@tormachinc 5 ай бұрын
Our previous mills used butyl and it works, but Sikaflex is better for adhering the enclosure together and to prevent future leaks. Trust us, the mess is worth it.
@rtrottier14
@rtrottier14 5 ай бұрын
great vid. Where is Part 2??
@tormachinc
@tormachinc 5 ай бұрын
Part two was delayed because of the unexpected demise of the edit computer. The new computer is now running, and part two should be complete by either the 18th or the 23rd.
@nathancoy8066
@nathancoy8066 2 ай бұрын
So it doesn't look like you can move the back of the machine up close to a wall without putting it back on the pallet...you'd never get your pallet jack out from behind it...
@tormachinc
@tormachinc 2 ай бұрын
We designed the 1500MX so that it can be moved with a pallet jack from the front of the machine. You shouldn't have to put it on a pallet to move it around the shop.
@zacharykarr
@zacharykarr 7 ай бұрын
How tall is the pallet? Looks pretty close for a garage door. Or is it much shorter if you take the sides off outside?
@tormachinc
@tormachinc 7 ай бұрын
Crate Dimensions: Factory Assembled: 68 in. × 74 in. × 89 in. (1.7 m × 1.9 m × 2.3 m) Self Assembled: 54 in. × 58 in. × 89 in.(1.4 m × 1.5 m × 2.3 m) Pallet Weight: Factory Assembled: 3210 lbs. (1456 kg) Self Assembled: 2650 lbs. (1202 kg) The weight of the factory assembled 1500MX can vary according to the accessories and upgrades.
@mapstardamo1624
@mapstardamo1624 6 ай бұрын
With the crate removed, what is the minimum height you can get the machine down to? I'd be looking at maximum 76" to clear my garage door. Also when will these be available in the uk
@tormachinc
@tormachinc 6 ай бұрын
@@mapstardamo1624 The maximum height of the machine in Z is 94 inches. To get the machine through the door it would have to stay on the pallet and then that height is 86 inches with a pallet jack, or 83 inches if you push it in with a forklift while it is on the pallet. Here is a document going over the machine footprint: tormach.com/media/asset/5/1/51221-b.pdf
@mapstardamo1624
@mapstardamo1624 6 ай бұрын
@tormachinc I had seen that document. 83" is still too high even with my trim panel removed as I have 80" max (I only have 82.5" internal ceiling height but can cut a hole in it for z axis) Not looking like it will fit 🙄
@AWA-WELD
@AWA-WELD Ай бұрын
Sikaflex!
1500MX Installation - Flood, Washdown and MQL Setup - Second Part
21:11
How this machine transformed our capability overnight
10:47
DarkAero, Inc
Рет қаралды 64 М.
If people acted like cats 🙀😹 LeoNata family #shorts
00:22
LeoNata Family
Рет қаралды 44 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 117 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 16 МЛН
No. 409 12-14-2024 Baffle seals part-1
8:50
S-21 Project
Рет қаралды 18
A Tormach Unlike Any Other
10:59
Practical Machinist
Рет қаралды 36 М.
The longest unboxing we've ever done. - Tormach CNC Mill Commissioning
16:07
Linus Tech Tips
Рет қаралды 1,5 МЛН
Machining a part on the Tormach 1500MX
25:44
Audacity Micro
Рет қаралды 11 М.
Dissecting a Tormach 1500MX
56:55
Audacity Micro
Рет қаралды 10 М.
Getting Started with Tool Tables in PathPilot
22:10
Tormach Inc.
Рет қаралды 57 М.
If people acted like cats 🙀😹 LeoNata family #shorts
00:22
LeoNata Family
Рет қаралды 44 МЛН