Tornador black vs tornador classic is the black better?

[@ChuckWood]

Thanks, I made up my mind, ordering the classic now.

[@badandy122376]

2021 thanks. Got a classic for my needs.

[@orlandochaparro6281]

Dude your videos are great 👍 I wish you were in Florida You help me make up my mind keep making good videos 👍👍👍👍👍

[@PadmaDorjee]

Really honest and helpful Dan, thank you mate from Australia.

[@Tops1212]

I almost bought the black and saw your review, thanks 😊

[@Boodieman72]

The black does pull it out into the cone, you do also need to flush the black. Its just because the inside is black so you don't see it. The black uses a higher volume of air but at a lower psi, just like a HVLP paint gun.

[@rjmobiledetailing5896]

Good looking 💪🏾💯

[@demonjester5564]

Thanks for the info saved me $80-100

[@AmirAbdullah]

That 21 gallon harbor freight keeps up ? Wow gonna get one

[@kylemorgan6137]

I run a carwash we use the classic model, had a black model bought 2 more classics .

[@oscarmondragon8648]

Thank for the awesome video

[@dandansdetailing9755]

Thank you for the comment. I enjoy seeing if people are enjoying the content and possibly helping someone.

[@genxkevin]

thanks... im ordering the classic. have been researching for a while... I looked into the Groits one but they discontinued it? hmmm. cheers

[@EfieldHfield_377]

Dude thank you

[@johnnybgoode-ju4nw]

Hey Dan Thanks for the comparison. Helped me lot with most of my skepticism. Have you tried to see if any parts for the black are interchangeable with the original (i.e. the nozzle, the cone, etc)? Also, great tip on the swivel connector. Any info where you got it?

[@dandansdetailing9755]

sorry for the delayed response. I am glad if I helped because I know most people don't buy both so they just don't know the truth. I did look to see if I could swap some parts and they would not work right. I didn't have it in the video but I now have a stainless still cone for the classic. The idea being that you shouldn't have to replace the cone and possibly not the inner liquid tube as often. that was one of the down sides to the classic is that you had to replace those if you used the tool a lot. but the stainless steel cone should help solve that. and I cannot remember if the swivel came from home depot, lowes, or on amazon. but it's def worth getting

[@James-pd6ce]

Wondering where I could find the name of that wee swivel connected to the tornador? Would be a life saver

[@albertochavez5891]

Isnt it easier to just use a carpet extractor for floormats, carpet & seats I think this is just made for door panels and trim rather than cloth. To me it just seems like its more time consuming

[@JohnSmith-yl9en]

I´m wondering if it doesn´t drive dirt deeper into the pile, hiding it. I´ve seen comments reporting how it scatters dirt everywhere, so I guess that its best use is for very tight spots, and those carpets you can bring outdoors. I will probably use a steam extractor in most cases after vacuuming, and use the Tornador to aid in drying, whatever water the extractor doesn´t pick up.

[@cloudatlasminer478]

It’s works amazing on cloth seats, but from my experience even with Shampoo, brush, and Tornador, you should still use and extractor with enzyme to get a real professional deep clean look.

[@ArkMedic1]

So, the issue is that the black one does not suck the dirt and the water backup, right? And, does the black one have the little tube inside that spins around? Today is the first day I have seen a commercial for this object!

[@TheSteereFamilyAdventures]

Thanks for that brother was going to get the Black because it's an upgrade but I guess it is not thanks for saving me money brother

[@dandansdetailing9755]

Yes sir I am glad I could help out. Thank you for leaving a comment and letting me know

[@JohnSmith-yl9en]

You need a stronger compressor for the Black version, preferably 6 bar (don´t go higher though).

[@zzadrian001]

Where did you get the swivel that you have on the classic and what is it called? I can't find one on ebay anywhere.

[@dandansdetailing9755]

I get mine from Harbor freight. They are great

[@fvckthemkids]

The classic uses like 4-5 cfm.... The black uses about 6 cfm.... At full power the black outperforms the classic...try it on a compressor big enough to run it properly.

[@darker3rrr]

I'm From Europe and I got the Tornador Black S Z-020S and you are correct it uses more air but outperforms the Classic by a mile :) all you need a compressor with 3HP+ and possibly above 40 gallons.

[@ms3er396]

Agree. I LOL at so many on KZbin using small portable units thinking it''s going to work. The tank isn't the most important factor either, it's the SCFM rating. These tools use 5-6scfm's and if you buy a compressor rated only at that same level, it's going to burn up rather quickly as it's going to need to run all the time. Most compressors have a life based on 50% run-time thus if you're not running a compressor that can cycle OFF during your use, then it's just a matter of time before it will die an early death. The pistons need to cool. The Minimum to be safe is one that will put out 10-12cfm's. This way even with a larger tank once the machine cycles ON it will continue to drive the gun at a full 90psi while simultaneously filling the tank back up thus allowing for it to finally cycle OFF and cool down a bit.

[@yungswaggerdik9036]

I have a husky 20 gallon I might buy the classic cause it’s cheaper

[@cloudybay1885]

just order the classic now thanks

[@vallero7607]

What psi or gallon compressor do you recommend for these..?..Great videos..

[@dandansdetailing9755]

sorry for the delayed response. i run them at 90psi that is the max so running above that will lead to quicker wear and tear. and i have a 21 gallon tank that puts out 4.7 cfm at 90. I can run the tornador classic non stop but the black I had to stop every couple of minutes to let the compressor catch back up to 90 psi. that's one of the big reasons I prefer the classic over the black

[@vallero7607]

DAN DAN'S Detailing it's okay, Yes I wanna get the classic I just need a good compressor..Thank you..

[@vallero7607]

DAN DAN'S Detailing Do you think Central Pneumatic 8gallon 125 psi would do it...?...

[@dandansdetailing9755]

yes it will but you just might not be able to run it non stop but you can still get the job done. from what I have heard that's a good compressor. but I would get the extended warranty

[@ChuckWood]

I have the same air compressor, good to know it will work.

[@supremeautomotive6749]

The black is way better you just have use the right compressor

[@Son-of-Goumier]

Can you tell us ...what os best compressor for the tornador

[@ERICSR-ni7rg]

So did this guy get a good apple start at 5:55 Watch "Tornador Cleaning Gun: Black Edition part 2" on KZbin kzbin.info/www/bejne/r5yTaIVqZcqmZ9U

[@ERICSR-ni7rg]

You said your mats was light color like your tailgate...sorry but your mat appears to be darker and even after passes with both tools I dont see a real difference. P.S. he must have gotten a good apple too Watch "Chemical Guys Hungary - Tornador Black" on KZbin kzbin.info/www/bejne/Z5mse4ijhs6IY7s

[@Steve42098]

Shit I'm glad I got the china knock off for $20'

[@albertochavez5891]

Hahahaha me 2 , i just ordered it today lol

[@mikehunt811]

Funny how people can no longer read now days. This company must be shaking their heads and laughing at him because he can not pronounce the name correctly. They even put a picture on the bottle to help the people today pronounce it correctly. Lol Ill give you a hint. You take the word tornado it's pronounced the same just replace add an R at the end so the ending ends with or Tor-na-dor

[@westinsmith5217]

This video is about a review not about pronunciation partnah stay focused

[@ahmeda473]

@@westinsmith5217 Exactly . People just can't be thankful