This is how I repaired the broken lever to engage the cutting blades on my Toro wheel horse lawn tractor. I used a 3/8 16 threaded rod I got from Ace hardware.
Пікірлер: 17
@bluedaddy234 жыл бұрын
I had the same problem, cheaply designed. I didn't have time to go to Ace or anywhere so I put the lever back in and poured some Gorilla Glue over the ends...been almost 3 years and it worked every time. But your video was very helpful thanks for posting it brother.
@greybeard8044 жыл бұрын
Exactly what I was looking for. Thanks!
@Artseventy64 жыл бұрын
You're welcome, and thanks for watching.
@tbah94022 жыл бұрын
Just got a mower for free because this was broken and I couldn't figure out how it was supposed to be because all the parts were missing
@NicBarr-oc2ib2 ай бұрын
What size thredded rod?
@Artseventy62 ай бұрын
@@NicBarr-oc2ib I used 3/8th
@NicBarr-oc2ib2 ай бұрын
@@Artseventy6 thank you just got this older one did 2 passes ans it crapped out. 👍👍👍
@Artseventy62 ай бұрын
@@NicBarr-oc2ib crapped how bad? Engine?
@Chris-en6jx5 жыл бұрын
I have the same problem. Where does that cable go to? Tips on getting the gas tank off?
@Artseventy65 жыл бұрын
Not sure about the cable, just engages the blades, but the brass colored bar you see in the video holds the gas tank in, there's a 5/16" bolt that holds each end of the rod in place, if you loosen those, the gas tank should be free, just set it up out of the way. Good luck
@rushmore1206 жыл бұрын
So the cable didn't break, it was the ribs that held the rod that broke..Good job repairing it..
@Artseventy65 жыл бұрын
sorry for the late response but yes the cable was fine, just the mount broke.
@Artseventy66 жыл бұрын
Thanks, it is still working just fine, thanks for watching.
@garysmith73425 жыл бұрын
so u drilled a hole on both sides? mine did the same thing..
@Artseventy65 жыл бұрын
@@garysmith7342 Sorry for the late response, you probably fixed yours already, but yes i drilled both sides so the threaded rod went all the way through.
@garysmith73425 жыл бұрын
@@Artseventy6 thanks . fixed it thanks to you!
@Artseventy65 жыл бұрын
That's great, glad it helped, thanks for watching.