Toro Recycler belt replacement. Don't ever give up, you got this EASY TASK

Рет қаралды 15,185

Күн бұрын

Пікірлер: 28

@aaronwilson9763 3 ай бұрын

1:10 - instead of taking off the rear drive wheels...raise them to the highest setting, then remove one of the bolts (to the plastic rear baffle/bagger assembly)...then lower the wheels to the lowest setting, to finally remove the last screw to the rear plastic baffle. It was KZbinrs like you that empowered me to fix rather than replace my 22 inch Toro Recycler. Just paying it forward thanks for sharing and what you do!

@LazyGrandpasGarage 3 ай бұрын

Thanks for information, I personally find it easier to remove wheels so you could remove any debris and inspect gears.

@reginadean6450 11 ай бұрын

Thank you for the step by step guide. I was able to replace my belt and mow the lawn today!

@LazyGrandpasGarage 11 ай бұрын

You're welcome, I'm always glad to hear my effort helped someone get the job done.

@stevefredericks2304 2 ай бұрын

I just purchased the exact mower used and it hardly could move so I purchased a new Toro belt for it. This video had great step by step directions and illustrated just where everything is. I ran into the additional fun of having one of the motor mount bolts snapping g off (it is a 12 year old machine that appears to have spent some time out in the weather) After drilling that out, everything else went smoothly. One additional point is that the travel cable may need some adjustment where it bolts to the handle with the additional traction of a new drive belt

@LazyGrandpasGarage 2 ай бұрын

I have not had the fun of a broken engine bolt, lot's of left side engine mount bolts working loose. They sound like a noisy engine upon start up. Thanks for mentioning cable adjustment, will have to make a video on this. Appreciate your stopping by and long comment.

@fairyologistwright3928 4 ай бұрын

Thanks so much! Didn't have to stumble through the figurin' it out phase. BTW 3/8" socket fit a bit better on the cover screws (than 10mm)

@LazyGrandpasGarage 4 ай бұрын

Thanks for stopping by and watching the video. Glad it helped you. Thanks for the heads up on 3/8" .

@AllenBlackwood 2 ай бұрын

Good, clear directions. Thank you!

@LazyGrandpasGarage 2 ай бұрын

@@AllenBlackwood you're welcome, I truly appreciate when someone takes time out of their busy schedule to leave me a kind message of appreciation.

@alsmith5714 15 күн бұрын

Rear wheel drive belt won't loosen to start it up, belt is tight all the time, all is ok up at the handle bar. ....thanks

@LazyGrandpasGarage 15 күн бұрын

@@alsmith5714 stupid question, did you pull belt guard cover off and inspect what's binding underneath? Grass build up, does transmission rotate back and forth when engaging and disengage

@r.michaelflournoy538 4 ай бұрын

Great tutorial, thanks.

@LazyGrandpasGarage 4 ай бұрын

You're welcome, thank you for your kind comment.

@TheTrailblazer1974 2 ай бұрын

Please next video say "da bears"

@LazyGrandpasGarage 2 ай бұрын

Please explain

@deborahgreenwood9558 Жыл бұрын

Very helpful!

@LazyGrandpasGarage Жыл бұрын

Thanks for watching

@USArmy91222 3 ай бұрын

great video, i just did this job on my neighbors Toro Personal Pace..she got half way done cutting her lawn and the belt came off the pulley near the transmission..i noticed when you were done with this job, the belt seemed to have some tension on it, hers seemed to be fairly loose and have a bit too much slack..not sure if that's what caused it too come off the pulley or not? any ideas? i took it apart and put the belt back on but i'm not confident it will stay on once she starts cutting the lawn again?

@LazyGrandpasGarage 3 ай бұрын

Try adjusting the cable. Spring on cable keeps some tension on it.

@USArmy91222 3 ай бұрын

@@LazyGrandpasGarage hmmm, i've tried adjusting the cable but the slightest amount of tension causes the self propel to stay engaged? i'm wondering if the spring is worn? or possibly another issue?