How to Paint Motorcycle Wheels & Polish Rims

[@toshiomatsuzawa8290]

New Video!!check this out! How To Custom Paint a Motorcycle【4K】 kzbin.info/www/bejne/aXe1eaJ8ZbmiidE

[@dharmendrabengali2714]

What I appreciated watching this video is the time you took to do each and every step and attention to detail. Definitely worth the effort. Thanks for putting it out.

[@luccamaximilian5253]

Instablaster

[@SirNC89]

That is a fantastic exhibition of your patience, skill and pride

[@greentechnology7346]

I always admire the detail of Japanese craftmanship. Excellent job Mr Toshio Matsuzawa! Please create more videos. Thanks!

[@toshiomatsuzawa8290]

I'll upload new video a few days later!

[@KevinT707]

I was just about to reply with something similar to. There's just so much pride that goes behind any work that they do.

[@lichencook]

I respectfully want to say that you are a maestro. I've learned lots from you. Thank you so much.

[@michaellarue8645]

Training under you for a month or two while on a vacation would be a dream.. then bring back the skills i learned to Canada and spread more Japanese joy

[@KensWorldRestorations]

Nice job! I am restoring a 1984 Yamaha Virago 1000 and this is exactly what I need to do. It's nice to see someone else doing it so I can get some ideas. Your workmanship is very good an it looks great.

[@discflight]

Really beautiful work 👍 the attention to detail and the patience is wonderful 😎

[@ARCHIE8159]

Holy cow, what skill and patience. Amazing !

[@SDsailor7]

Doing this job is so tedious but the results are so beautiful!

[@agamurtuza8963]

Thank you for not putting any stupid bloody music in background. Just great job.

[@giovannialbanese7985]

this is why I love Japanese people! you guys are amazing

[@darkdoodler6948]

Very inspired by your 'how to paint motorcycle wheels' and 'how to custom paint a motorcycle' videos. Thank you for sharing! I plan to polish my ZX-14r wheels but will leave the paint black for now here in Kumamoto. I really love the gold look but I'm afraid I'd be too lazy to clean the brake dust, ha, ha. Awesome work!!!!!

[@toshiomatsuzawa8290]

Thank you for your viewing. You can do it.

[@user-ws7jn2gu9s]

So much care and attention to do detail. The pre-cut bends for where the spoke meets the wheel :O I will try and work this carefully over winter on a similar SR400/500 wheel. Not sure were I'd find 2mm tape, perhaps an art supply store.

[@rickmartin2154]

Absolutely love all your work !

[@toshiomatsuzawa8290]

👍👍

[@CMKNxCMKN]

the most satisfying paint job i ever seen. good job!

[@KensGarage1]

Great video. I am doing similar paint and polish on RZ350 wheels and this was helpful. Thanks.

[@sierrarhino1975]

I’ve read that its better to remove the corrosion with chromic acid than to use a metal brush. The brush will cause galvanic corrosion to form under the paint over time.

[@Denis-bo8ms]

Cant stop watching! Will do this to my Comstar wheels!

[@mayettelongchannel4517]

Nice content mo ang galing ang daming gagaya nito

[@dueruote37]

😀perfetto!!! Bel lavoro bravo !!! Ne sto comprando una uguale da ristrutturare.. voglio provare a farlo anch io 👍

[@hadriansmith6400]

Wow such attention to detail.Nice job

[@spiritoflights]

Excellent and very well done job,attention to detail is worth the outcome. great job man

[@toshiomatsuzawa8290]

Thnk you!

[@munkeemunks]

craftsmanship always deliver awesome finishing.

[@kaveebee]

Very Professional Job! I like the use of a clear coat, although they mean that you should not use a steam cleaner on it. I also like to remove the tyre, its amazing how much dirt there is on inside of the rim where a tyre has sat for many years. Well Done!

[@BaronSwiss]

def a lot of patience there. lets see the final product on the bike?

[@bostonsirish1]

Imagine how cool and helpful it would of been if he actually narrated this video explaining what materials he was using

[@alwood9148]

true but try metallic silver as a base and i will be using metallic gold top coat then clear it all in rattle cans but then sand and polish the rims for effect give yourself 2 to 3 days end result will blow ur mind i bet

[@vincentmondello2052]

Wonderful job, very precise.

[@zulu59blue27]

Lovely work! !!!👍👍👍

[@LunaAndValentinoYT]

Hi I really like your video I will watch that probably more than 5 times and I'm going to do it myself great job.

[@renatoposavec9409]

Absolute fantastic Job.

[@CHIBA280CRV]

Amazing meticulous work ! Thank you .

[@shovel2683]

wow you did a fantastic job

[@Zckiee]

wow you are so creative and genius. konnichiwa 😁

[@ysmm1696]

I am a painter car painting working in landmark honda I chang company

[@toshiomatsuzawa8290]

konnitiwa is こんにちわ！

[@darrenmillion1432]

Man this is so great keep up the good work.

[@vanillasky1721]

what is the code color that u use ? and the brand too ? it looked so nice

[@Bow-to-the-absurd]

Beautiful work

[@dyllan1195]

Great work ! And a very nice rim !

[@thhvggnkrthffhjjjbh6316]

superb craftmanship! the precuting the tape corner radius is genius! thank you for sharing!! is the tape you use crepe paper? it looks great and really sticks well... here in sweden its impossible to get good fineline tape. best regards m. möller

[@1royalwolf]

Wow. Awesome job mate

[@haiqalaziz7319]

Nice job! In malaysia (my country), these rim (cutting look alike kawasaki ar80 and ar125) cost rm4000 to rm6000 depend on condition and originality.

[@saisokuhashiriya8069]

only idiot gonna pay for that amount..it cost only $250 for a pair in UK..

[@firdausshukor3122]

aku rasa itu sportrim KH100 sbb warna dia hitam n tepi dia chrome..tapi dia repaint balik warna mcm AR80..

[@wsr770]

orang Malaysia kan suka membazir

[@arifyahya1338]

tau xpe

[@tuanbaharintwanbaharin9457]

itu kawasaki kh100

[@redcracker119]

Man this is hell of a lot better. Can I do the same without putting the tires on?

[@MrRastamanGreece]

excellent job,congratulations

[@toshiomatsuzawa8290]

+MrRastamanGreece THANK YOU!!

[@lelaroslan1516]

MrRastamanGreece

[@suhaimizulkipli4786]

wow, this is fine art! a superb fine art!

[@115liam]

Well done 👍🏼

[@toshiomatsuzawa8290]

Thanks!!

[@raditeadi2059]

Great work...two thumbs up

[@Xantylon74]

As always great job!

[@6ix9inegaming56]

what code colour and brands? pls share with us

[@michaelwebb8788]

I'm curious... if you spray clear over the rims after paint and polish, will it prolong the shine of both?

[@SoyBoySigh]

Is this from the four-cylinder DOHC "KZ400" aka the 400cc version of KZ550? Interesting lil' bike!

[@briank5798]

Talk about taking pride in your work.

[@lay59875]

Hello love the video 👌. What gold basecoat did you use ?? Thanks 🙏

[@toshiomatsuzawa8290]

I used original gold color. thanks

[@myreality7817]

Any ideas how to leave a perfect tape line when using paint remover so as to leave the original paint intact with a nice clean edge? Paint remover bleeds past the tape line when I do it leaving a jagged line. Fortunately I practiced before stripping to the ridge on the wheel where I want to stop.

[@Helen-Chen-Wheel]

I really like your videos, what should I do if I want my wheels to not corrode so easily? Do I need Nano coating?

[@toshiomatsuzawa8290]

I don't think coating is necessary unless you live near the sea. I think polishing it regularly is effective.

[@muhammadzulhaqeem9936]

wow how creative you're well done thanks because sharing

[@josealfredo2385]

Que buen trabajo felicitaciones, quedo exelente!

[@dipling.pitzler7650]

Amazing job by a master ,but wouldnt it be easier to polish first and then paint?

[@toshiomatsuzawa8290]

That may be true. Everyone does it differently.

[@gasulchuling6631]

I dnt know know if i saw it correctly but was there any primer or none at all?

[@danielyarilolopezgarcia1571]

great result!!

[@fahmihamdan5599]

what is the clour code for this colour?

[@ammarnaaim5152]

i have a friend in malaysia..they call dat sport rims 'AR 125'..the most cheap and expensive wheel..but according b brand ,original and plagiarism:)

[@darkdrake6115]

AR125 is much smaller and longer..this one is big and completely different.

[@iqmaltony1121]

Adamya Wilson true bro. i tought it was AR125 too

[@shafiqshafizi9043]

yes im from malaysia. malaysia call that sport is ar125. ar80 small than ar125

[@muhammadtakrimie1136]

ar125 does not have double disc bro lol

[@santoshwaghmare8720]

Adamya Wilson

[@thetruebrit85]

Beltin job Lad, impressive,😎

[@tomtrevan5518]

Seriously OCD, beautiful product, not sure I could have the patience

[@RM-gc4zk]

They're stunning! I've got to do this very shortly on my Suzuki Gsx400f wheels, they are very similar design to these but they have more lines that need taping up than the ones shown here. Good luck to me I guess.

[@miela4927]

what type of spray paint did you use if that brand "samurai paint"?

[@SoyBoySigh]

Wheels seem similar to GPZ305 but you've got a rear disc and a 19" front - if I'm gonna fit a CAST wheel (I'm way more into wire-spokes, OR the Honda COMSTAR rebuilt with Akront "NERVI" 50% lighter yet wider rims!) well I'd much rather have a slightly wider rim than standard, and either 18" front & rear, or 16" front & 18" rear - Check out my "CB900K0 Bol Bomber" and "KZ440LOL" projects sometime! "Binky Sigh" on Crackbook!

[@mariuscochior4666]

hello .. can you say me the RAL or the code of the color? thanks

[@pmoreno4001]

looks great!!

[@alhudasaputra6821]

Good job friend...

[@diego-xq9pk]

really nice job man congratulation ;)

[@luffy-wb2gw]

awesome work .

[@joex1950]

amazing work of art !!

[@MarcelVanHoekElvis]

Looks fantastic!

[@cloverdale87]

Why did you wait until after the paint and clear coat to Finnish polishing? I would want clear coat over the polished alloy to protect it and keep the shine. You are very good at what you do. You take your time. If you could make a computer file for all the tape areas. You could cut out all your tape work with a cutter/plotter. Then sell the download. This would save you a lot of time in masking. It would be more putting stickers on the rim/tank/whatever. Your fiberglass template that you made and all the tape and time. Could be all cut out with the plotter. Great job on keeping the machined areas free of paint. Paint can melt and cause the torque rating to be lessened for the people that don't know.

[@RM-gc4zk]

I know this is an old comment but for people who read this please do not clear coat over bare or polished alloy as it will just look awful over time when the metal starts to corrode and mess it up then you have to strip all of the paint off and start again. Just keep on top of them with a bit of polish now and again to keep the shine.

[@jagitmax]

@@RM-gc4zk Well the purpose of the clear coat on the polished metal is to provide a seal barrier from atmospheric conditions, mostly oxygen, which is the main cause of oxidation on the bare aluminum, which makes it start to turn dull, the bright polish will last long enough if you seal it well, thus avoiding the need to constantly keep polishing the wheel. Always test the choice of clear coat paint to determine which one will last longer before starting to turn yellow, which is what usually happens with clear paint over age.

[@alwood9148]

i am doing my kz500 wheels the same thanks toshio

[@toshiomatsuzawa8290]

I wish you good luck👍

[@jagitmax]

Very nice.

[@СергейМакоткин-ф7ы]

Very nice !!!

[@journeyquest1]

Gold? Cheesy look of the 80s. Like the wheels on my Suzuki GS1150.

[@0009hu]

i love pink and chrome in my kawa gto rims ^^

[@harishvaishnav8866]

For spraying the tank, use which spray to use.

[@readyplayer1363]

What color did you use for the primer?

[@nnamdinwadialo8118]

What color of gold is this ? Copper gold or brass gold

[@Kickstartyourcar]

One word= WOW

[@balasundar1359]

What type of paint is it,, is that a oil paint or other...? Mention plz

[@ehsan83]

amazing job. so if this is the difficult way what is the easy way? ;)

[@mklteams]

Genial ! Saludos desde España

[@toshiomatsuzawa8290]

+mikel saez berenguer Gracias!

[@cateatsushi3008]

+Toshio Matsuzawa It was awesome!!

[@sabujjana]

excellent job, however you could have put clear coat on the metal surface too

[@metubeusercom]

Very neat!

[@kennethbell54]

Brilliant. Thanks for sharing.

[@THEMOTODOCTOR]

I have a question for you.......Why don't you directly sandpaper the surface instead of using the paint remover?

[@bailey9r]

because it is so rough.

[@harishvaishnav8866]

What do you use to remove color from the tank?

[@gurramramana2555]

beautifull job

[@sgafry]

Molto bravo e attento ai dettagli

[@johnnyadame6505]

Beautiful!!!

[@prospraykh]

This rim look easy to spray

[@MWitt-bw7im]

Very well done!

[@glennmassengill3532]

Amazing Skills

[@bhagchandgoyar8369]

Kya aap pisson palss bike ko modify kiya h

[@titan371]

Great job do you have the paint code ?? Thank you

[@raziasultan6959]

Good work

[@toshiomatsuzawa8290]

arigato

[@frankthetankf1234]

what is the stuff u use to remove the paint called

[@ewansapri2636]

frankthetank f paint remover