TOTO TOILET - CT446CUG#01- INSTALLATION

[@darryleckt8692]

Thanks for the video. I did what you did…. it’s pretty clear that you work faster than me. 😃

[@rickbeam]

Your drill man was trying his best to break that Drill Bit in the first video, a maniac!

[@allyrocksx3]

Great video! I have to service a Toto. I think it may need a new gasket because its leaking from the floor and not the angle stop. I've never taken a toto apart before so this is very helpful.

[@raulgarcia528]

Gracias amigo por la installation muy Bien entendida. Thanks bro

[@MrChazz965]

Great video, I’m installing one in my house next week. Appreciate the ‘no talking’.

[@PhilipLee64]

Super! I like that you used the Toggles for the install the toilet seat. Our plumber did not and used plastic screws. I need to replace the seat. I can't get behind the skirt Toto Aquia III - CST464MF. I see no way to get access to the nut under the bowl flange without removing the toilet bowl and would prefer not to do that . The back of the bowl is almost flush with the wall behind it. There must be an easier way, right? Any ideas? Can I simply remove the plastic screw and then use the toggles. I think the part number is (THU651N)?

[@michaelb.hortonrealtorgrim5922]

Excellent video! Thank you.

[@g-padonuts9298]

Nice vid. Is the toilet a 12" rough-in flange measurement ? How far is back of tank to wall ?

[@bosjoc]

Did you put the required washers on the toilet seat bolts? Looked like you just screwed them into the rubber washers that were pushed through the holes?

[@Samlol23_drrich]

They should have painted the wall behind there first. At least one coat.

[@armandoramirez9123]

Hola buen trabajo pero como es la parte donde se ajusta los tornillos de ajustes de los lados cuando se pone ya el toilet quiero decir la medida que no se ve en el plano..gracias

[@bradleykeough5982]

Lmaoooooo you must go thru a shit tun of drill bits drilling like that LOL I watched you flex the bit on every hole !!! LOL

[@go-diy]

thanks for watching!! 😉

[@BenedictHudson]

Wait you measured the rough in off the baseboard? Thought it was supposed to be off the wall

[@QVL75]

Nice! Thank you for sharing. I have a CT442CUFG40#01. Does it have the same installation procedure?

[@sihaogong5159]

If it's very expensive big floor tile, might the drilling break the tile to pieces at all?

[@joeysantos3978]

Good video but why use a drill for connecting the screws into toilet and not hand tighten when time comes to take off will be a headache

[@Shitty796]

He had it on setting number 2 it’s hardly over hand tight in that mode

[@chris-x1o]

The installation distance of my toilet toilet is not a regular 12inch but a 10inch. Can I install this toilet?

[@Thunder777m]

do you like the way it flushes??

[@porsche1971]

great video!!! thank you! now I know what i have to do!

[@ericalatrell799]

Ours we just installed yesterday and has an incredibly slow leak at the base. Tips?

[@TOB-uk2xy]

I thought Toto puts the fill hose on the outside of the tube. I don’t understand why?

[@zeekflash6924]

So , toto, toilets are compatible for , your standard toilets .. looks like a lot of work

[@99MrFrost]

How long did it take to install?

[@paulgriffin6669]

But how does the toilet tank lid attach?

[@michaelmcgee2026]

Will the rough in fit a 3" flange? Bc the lip on the bottom wont fit through the 3" flange. And I'm looking at mine. The back part isn't flush with the front part so if I install it it looks like it will sit at an angle. Is it supposed to be that way?

[@hooblabity9494]

Thanks for this!

[@joelc91006]

What is the model of the toilet seat

[@mattblah7737]

Absurd I'd charge triple to install these

[@cmdv42]

💯

[@wangyanzhi3258]

How to fix it if it's leaking at bottom of the tank？

[@jasminemeow9806]

Why the flush is so weak? Same thing happen to mine

[@go-diy]

Unfortunately, this is how this model works.

[@rdjmillan]

I have this one, it is not weak, it is rather powerful but just quiet. I has not clogged for several months for me.

[@BelloCruz]

👍🚽

[@jaxxo5]

This tolit sucks, I have one kids always poop on the front where the water doesn't reach. Changing the seat and now the bolt won't tighten.

[@swamphox1]

Best time to install a toilet is BEFORE you have to paint around it and install molding. I like it when its too easy and you need to make just that much more of a pain in the ass.

[@danielamaro3114]

The installation was hell, never again. Not worth it, you can buy an American toilet and install a washlet seat. Works perfectly 🥰

[@michaelhinchey]

Drilling holes where water can leak.. nope

[@go-diy]

REALLY?? 🤨

[@HonestAbe689]

seems like weak flush

[@cameraredeye3115]

Not weak, just quiet. It's a washdown.

[@TheUltraazul]

No 👍🇲🇽💪

[@hellasboy8243]

I hate this fucking toilet, while it flushes great, it doesnt clean well at all, you have to aim at the deep 4" section that contains water, unless you want to flush 6 times to clean it. Always wondered how to remove the toilet. DONT buy. Great video.

[@billiejeankuvshin]

Смыв сифоном круче