Рет қаралды 11,469
Finally installed the rear tow point on the jimny with side exit exhaust. This location of the tow point was only made possible after the stock rear muffler was removed.
The tow bar is used from the Indian Army model Gypsy . Very sturdy with a 10mm plate and neat K section made.
Had to fabricate new plates and drill 3 holes either side in the chassis to mount.
Surprisingly the jimny ladder frame is 2.5” wider than gypsy.
No ground clearance was lost in the process and none of the hardware is visible.
Will be adding emergency lashing hoops and a 7 point trailer light connector also.
Used the stock hook that comes with the Army Spec Gypsy Model , normally rated for 5 tonnes load.