Toyota 3s oil pump differences

[@AndreyVms]

Good info, thanx. Left - altezza 3SGE 15100-88570, center far - 4gen GTE/GE "98-" 15100-88561, bottom 4gen GTE/GE "-98" 15100-88560. 3SGE engines in Caldina has same oil pump as GTE, but 25teeth gear as Altezza. In addition, 3gen 3sgte has rotor 60x14mm(same as 2gen) and 25 teeth gear.

[@jonhimmanst165]

The 3sge beams (altezza and caldina 3sge) pumps need to flow more oil due to the vvti. Good vid.

[@reecepedro3632]

I dont mean to be so offtopic but does any of you know of a method to get back into an instagram account..? I somehow forgot the login password. I would appreciate any tips you can give me!

[@koawallace2292]

@Reece Pedro instablaster =)

[@reecepedro3632]

@Koa Wallace thanks so much for your reply. I got to the site thru google and Im trying it out now. I see it takes quite some time so I will reply here later with my results.

[@reecepedro3632]

@Koa Wallace it did the trick and I finally got access to my account again. I am so happy:D Thanks so much you really help me out!

[@koawallace2292]

@Reece Pedro no problem :)

[@ProGrindCAMSHAFTS]

The caldina pump you are useing to ilustrate is the 5th gen right? If so all i thought gen 4 and 5 has no differences with pumps. Thanks sir very informative

[@gehringer37]

Nice video man!

[@velocityperformance8574]

Thanks!

[@matden5595]

Need help with 3s beams cam gear

[@velocityperformance8574]

What do you need to know about it

[@matden5595]

@@velocityperformance8574 set my timing tightened the cam gear and the cam shift but the gear didn't

[@almc-wi5vo]

Great information: In short, which of these oil pumps to use if you have a 3SFE turbo for the street? Obviously increasing the pressure and amount of oil circulating in the engine is the key. AND, you should, if you can, do a clip regarding the E250/E250F tran-saxle from the 3SFE and the 5SFE engines. much misunderstanding regarding these transaxles if you can install LSD from Cusco / KAAP / etc.

[@velocityperformance8574]

If your running the stamped steel oil pan found on 5sfe and the gen1/2 3sgte go with a Camry 5sfe pump from 97 and up.

[@velocityperformance8574]

I’m not familiar with the e250/ e250f trans. I know that a FWD trans has a different differential than the awd trans between st185/st205 and a mr2 turbo

[@trent88]

@@velocityperformance8574 so you’re saying you can run a 3sfe with a 5s oil pan and 5s pump?

[@velocityperformance8574]

@@trent88 some 3sfe and 5sfe are baffled and some aren't. There are some differnces in oil pans depending on what car they are for. Celica and mr2 are the same, camry is a little taller. Oil pumps are all interchangeable between 3sfe and 5sfe.

[@somedude9316]

Hi, so if I am understanding this correctly, we always want to be using the latest year 5sfe oil pump for all 3sfe/3sge blocks? I have a junkyard ST162 3sge (87) and its going to replace my 87 camry's 3sfe. Are there any fitment issues or massaging that will be required or is it truly a plug and play solution?

[@heyhihello8310]

So when building using the 5s bottom block people use gen 2 3s oil pumps for more oil flow? I want to make sure I’m getting this correct. Also would having balance shafts effect the flow difference between the 5s and gen 2 3s oil pumps? Glad to see you’re back! Your 5sfe build videos have helped me a ton with my 01 Camry engine!

[@velocityperformance8574]

The 97 and up Camry pumps are the highest flowing factory pump that comes on a 5sfe engine that I know of. I believe the balance shafts are the reason for the need for higher flow in the camrys. We use the 5sfe pump from the Camry on our 3sgte engines

[@almc-wi5vo]

@@velocityperformance8574 Adding to that, the 1997 3SFE oil pump (1997 TOYOTA RAV4 (SXA16L-AWMGKA) and the 97 Camry oil pumps are the same. Source ToyoDIY.com .

[@bigmack7522]

Can u compare rods between the all the gens

[@velocityperformance8574]

Saph I have some from a 2nd gen and 3rd gen 3sgte and a set of early 5sfe rods that I could do a comparison video for

[@bigmack7522]

@@velocityperformance8574 ive got a beams from an altezza would like to know which oem rod would work as a stock upgrade in the beams

[@divin3kag3242]

@@bigmack7522 oem wise everyone usually goes for the 3sgte rod

[@velocitythickslick6881]

Hey I’m Tryba do an oil pump change and don’t know witch oil pump to get for a 1987 Toyota celiac gts but it’s a regular 2.0 engine not a beam do you know witch gen oil pump is best for it?mine is done I belve.

[@munirladha6787]

I am doing a 1998 Camry do you want the oil pump housing and oil pump?

[@allensanchez582]

Hey man! What would be the product code for ACL oil pump for Caldina st215 engine Thanks man

[@ABeans07]

Whats p/n on late 5s pump

[@carlosa.claudiovargas1966]

Do you have one oilpump on good conditions 4 gen for sale???

[@AnthonyJordanWairoaboyNZ]

3S-GE oil pump be changed with 3S-GTE? The pump fits but drive gear is smaller on 3S-GTE Thanks in advance

[@zero_to_1000]

What unit of measurement at you using? Doesn't make any sense what you're saying without that info.

[@jchrg2336]

Mond cotroll instead of mind controll