Toyota Aristo/ Lexus 2GS Fuel pump hardwire/ 12v mod

*Toyota Aristo/Lexus 2GS Fuel Pump Install, Hardwire, and 12V Module Mod | Step-by-Step Guide*
In this video, I’ll walk you through the process of installing a fuel pump, hardwiring, and performing a 12V module mod on a Toyota Aristo/Lexus 2GS. This detailed guide is designed to make the installation easier for you.
*What You'll Need:*
- 40amp relay (your choice)
- 20amp inline fuse
- Drop-in fuel pump (494 Series High Output In-Tank Electric Fuel Pump - Custom OE Configuration)
*Key Sections:*
- *Fuel Pump Install:* Learn how to properly install your new fuel pump.
- *Hardwiring:* Step-by-step instructions to hardwire the fuel pump.
- *12V Module Mod:* If you’re only interested in the 12V modification at the fuel pump module, you can skip to the video.
Whether you’re doing the full installation or just the 12V mod, this video will guide you through each step to ensure a smooth process.
*Don't forget to like, comment, and subscribe for more car tutorials!*
#ToyotaAristo #Lexus2GS #FuelPumpInstall #CarMods

[@darrendent8288]

@1:13 paddle shifters ftw. Literally must makes the Aristo modern from that standpoint. -Ktrain

[@turbogears900]

I appreciate this video. I have an aristo jzs161, thanks .more videos of this car

[@533L5]

Hope that works out for you. I will say I killed 2 or 3 of those 340lph pumps from a couple of different manufacturers. Had them warrantied - sent back and manufacturers confirmed reduced flow / failure. And I don't think I had 5k miles out of any pump. Not sure why I couldn't keep them alive. Best of luck, maybe that brand is better than the others. Looks like you have a patch harness and so an aftermarket ECU. I'd feed a fuel pressure sensor to it so you can identify lean conditions which will be caused if fuel flow / fuel pressure is inadequate. Good luck with the build!

[@kcreegs1]

On an aristo? Running into lean issue on mine with a aeromotive 340 stealth after 45 mins of driving…

[@brianRED]

@@kcreegs1 do you have it wired to 12v or is it still using the fuel pump module?

[@brianRED]

Yes sir. I have a fuel pressure sensor wired into the standalone and have it fail safed just in case it sees low fuel pressure.

[@darrendent8288]

@7:44 360 WHP is definitely not bad for stock twins.

[@teko32002]

Does the plug with the 2 smaller wires plug back in to the oem relay?

[@turbogears900]

What color is your car, the aristo ?

[@Diabetic_Deity]

What does the r blue and white wire go to? I’m not using the oem fuel hangar I’m using one from auto sports engineering

[@brianRED]

it is explained @12:00 in the video

[@Diabetic_Deity]

@@brianRED appreciate it, I rewatched the video after my comment and found out, thank you