Toyota Camry Transmission Replacement How-To (4K)

Donate to the channel ⬇
www.buymeacoff...
Discord Invite / discord
IG @nick.nakai
2018 Toyota Camry 4 cylinder transmission removal and install to replace a leaking torque converter/oil pump seal without a lift. Pretty much any generation Camry will be a similar process.
#toyotacamry #camrytransmission #8thgencamry #7thgencamry #6thgencamry #torqueconverterleak #transmissionleak #rearmainseal #2018camrytransmission #2022camry #2022toyota #camrytorqueconverter #toyotatransmission #2018camry #camryrecall #toyotarecall #toyotatechnician

[@ahmedh4234]

i am a apprentice and i watch your videos all the time since i don’t really have time to learn at my dealership i come home and learn of you thank you so much

[@joseavila0915]

Great, how to video. It's a stark difference between a garage with a lift and working with floor jacks and stands. I applaude your effort in trying to show us all the details in your videos. I'm a diyr and today I dropped the trans on my 123k mile 2nd gen tacoma because of torque converter shudder. It took my brother and I two days. First time me doing any service to that transmission. Keep posting more videos. I know it's hard recording and then editing all to make it presentable.

[@DJR5280]

People are acting like the transmission failed. It was a cheap little seal. Good Job none the less. I couldn’t do that on the floor with jack stands.

[@georgesadler7830]

Thank you so much for this Toyota Camry repair video.

[@atiqkhan6683]

Great video mate Hats off for doing it on the floor. I used to do that 30yrs ago but not now Easier on a hoist

[@danielguerrero6721]

Been watching all of your videos lately & they’ve been 🔥 Keep the videos coming!

[@LetsDriftMedia]

Thanks fam

[@kenhardy4167]

Wow! For a solo performed and recorded transmission seal replacement (without a lift), this video is fantastic! Clearly this gentleman knows his business….and did both beautiful mechanical work and videography. Kudos!! Nice to know that Toyota had such well-trained technicians working for them. Dr. K.

[@LetsDriftMedia]

Thanks man appreciate the feedback!

[@taylordout93]

It’s nick nakai !

[@MIC-HEXED]

GOOD STUFF MAN!! KEEP IT UP YO!!

[@ratcamaro]

A GoPro with a head strap mount is the best way to record wrenching work.

[@sephiroth7818]

This is going to be me soon, except my RMS is leaking on a '14 Camry. May change the Trans seal also while I'm in there. Toyota supposedly changed the TC 50k miles ago.

[@LetsDriftMedia]

Good luck hope this video will be helpful when you tackle that job.

[@The.Car.Guru.]

Love this channel! Question: I’m replacing the short block on a 2012 Camry and wanna make sure I’m installing the balance shaft assembly correct. The repair manual says to put piston 1 at TDC and then rotate engine 90 degrees. Then line up the dots with the markings on the balance assembly and install. I’ve seen people put the dots opposite of the markings..which is the correct way? The manual read it as line up the dots with the markings..

[@LetsDriftMedia]

Thanks man I would follow what ever the repair manual says especially when it comes to that balance shaft. I didnt do enough of those motors to remember off the top of my head. What repair manual are you using? If its a legit website for repair manuals like all data or pro demand its not going to give you false information.

[@The.Car.Guru.]

@@LetsDriftMedia thanks for replying! It’s a Haynes repair manual. Not the best but I don’t do enough of these repairs to pay for a good one.

[@The.Car.Guru.]

@@LetsDriftMedia thanks for replying! It’s a Haynes repair manual. Not the best but I don’t do enough of these repairs to pay for a good one.

[@LetsDriftMedia]

@@The.Car.Guru. no problem should be good just make sure the marks are still aligned after you install it, sometimes it moves a little when it mates with the crankshaft.

[@The.Car.Guru.]

@@LetsDriftMedia thanks a million brotha you rock!

[@ricardoalamo8704]

You should think about investing in a lift. I put a small 2 post lift in mine. MaxJax, go check them out. Beats having to work on the ground.

[@LetsDriftMedia]

considering the bendpak lift for 9 ft ceiling garages.

[@ricardoalamo8704]

@@LetsDriftMedia maxjax are rated for low ceilings and you can stow it away when not in use so you get to keep your garage space

[@guitarTennisCarHomeFixFlying]

I wonder if discounters like harbor freight, Walmart, Temu, Wish offer at home car lifts, gotta make sure safe of course and have tires jack stands anything under lift in case of a lift failure

[@willieking4306]

Nice tool cabinet setup at the background. How many hours to do this work . Thx

[@LetsDriftMedia]

thanks, its a 15hr job. I got it done in about 10hrs

[@jasperdilincoln2341]

Not sure it you will get this question. I have a 2018 Camry. About two years ago i could feel my Car at Highway Speeds feeling kinda strange. Took it to 3 different Toyota Dealerships over time whiles getting an Oil Change. Finally last April 2022 was told they saw a little bit of a leakage that they would monitor. Then the Same around in October 2022. Then i went to as for a flush, i was told that there was now a large leakage, there is no way for them to check how much fluid i have because these newer transmissions don't have a dip stick. And i might need a new Transmission 🤔 😡. Should i get a new one or try to get it rebuild? Im over this Camry.

[@المزنستيش]

سيدي أنا أملك كامري 2011 وبحاجة إلى المساعدة هل تستطيع ؟؟

[@lVlArseniclVl]

My respects to you man!🤙🏻

[@carfreaks4793]

Great job brother nick

[@LetsDriftMedia]

Thanks!

[@carfreaks4793]

@@LetsDriftMedia Hyy brother nick you never replied to my message on the discord aap

[@LetsDriftMedia]

@@carfreaks4793 the server is pretty active. @me next time so I can get back to you.

[@jeremyanthony9300]

This video is awesome . How much did you pay for that engine support bar at Harbor Freight?

[@LetsDriftMedia]

Like 80$ awesome price and tool to have

[@Dspencer.5]

Did it fix it?

[@GeneG-wk2mz]

What the best Tim to service the transmission?and what all is done ?

[@JUNJUN-lw2vr]

That's a lot of work but I'm sure if you've done many of these...makes it second nature.

[@LetsDriftMedia]

Very true.

[@cokeguy133]

how many miles were on that camery???

[@otiliohernandez8349]

What was the root cause of the seal to fail? My concern is what if leaks again.

[@LetsDriftMedia]

Same here. And I’m not sure. Only time I’ve seen that seal leak is when someone damages it reinstalling the torque converter. This car has never had any major work. But there’s nothing else that could leak there besides that seal. Will update if vehicle returns with the same leak

[@harrylee591]

Curious, who pays for broken bolts? I recently replaced my starter and discovered one bolt was cross threaded. This added a lot of time to the repair. When this happens or a bolt head breaks off at a shop, who pays for the additional labor? Can a customer be quoted $xxx for a repair and then get a phone call that a bolt is broken and will now cost way more? I can only imagine how irate customers would get thinking its all a scam.

[@LetsDriftMedia]

It gets covered for free at the shop usually. Unless it’s something common to strip or break like exhaust studs. Then the customer will get advised of the possibility requiring extra labor before they agree to the repair.

[@benddover3093]

Good shit bro made that look easy! How big is your garage bro I might be buying a house soon with “2 car” garage definitely trying do some big work in there lol

[@LetsDriftMedia]

Just a standard 2 car garage. I wanted a deep garage or at least a 3 car when we got the place but honestly is plenty of room as long as you are organized. I could pull a motor in there no problem

[@benddover3093]

@@LetsDriftMedia nice! do you know if it’s 19x19 that’s how big mine would be You ever think of getting a quick Jack?

[@kevinkieel6778]

Na bro. Video was very well done considering your on the floor and by yourself. If your were to do this video covering every single step (like holding hands). Your video would be 3-5hrs long. Everything important was covered at least for me. The fill method to the camry is similar to audi's minus the special trans fill plug. Messy as hell without it.

[@LetsDriftMedia]

thanks man, and yea you right. I hate these fill methods, wish it was all dipstick like the old days.

[@charliecasseday8886]

Doing 16 plugs on a 250 first time

[@taylordout93]

Yooooo yooo yoo

[@nutoriousclown4107]

First time removing a trans on the floor on a Nissan Maxima I think it’s not that hard as long as you have regular tools and a tranny Jack and a lot of patience aaaaaaannndddd a lot of cus words lol

[@tellez4089]

Wtf how that possible I got a rav4 06 original everything 200k

[@LetsDriftMedia]

They dont make em like they used to. Your rav4 will see 300k plus easy if you maintain its basic services.

[@wadelawrence5966]

so how do you drain the fluid?

[@LetsDriftMedia]

Pull the 10mm Allen drain plug then unthread the plastic drain plug inside

[@sk-un5jq]

You should get a business loan and start your own Toyota repair shop.

[@shane462]

how long did this take you to do?

[@LetsDriftMedia]

6-8 hours I think

[@shane462]

@@LetsDriftMedia so for me @ least 16 hours lol! would you advise against putting in an aftermarket torque converter? i have a 2012 and have the shudder issue. but the shop wants 3,200..ouch!

[@LetsDriftMedia]

@@shane462 if you haven’t done the job a bunch of times then yea that’s sounds about right. And I would rec factory for the torque converter. Only cause it’s a lot of work to replace. Would suck if it went bad again due to being aftermarket.

[@andyg5004]

It’s leaking so soon bcuz Toyota quality is going down

[@user-tb7rn1il3q]

No, Toyota quality is getting better, but will never be perfect.

[@gasketauto3343]

1st!

[@rschreck876]

Why the eff does a Camry have a “skid plate”? 🤦🏼‍♂️

[@LetsDriftMedia]

Well I guess its more of a cover plastic, not an actual skid plate. I just get used to calling any cover underneath a skid plate lol

[@mdariyan3210]

What Yo Yo Yo

[@TheBaccaClench]

If y’all ain’t in the discord, what y’all doing???????

[@maxrx7]

What’s that?

[@francis55]

I do these at work with a 2 post lift. The fact that you did that all on the ground is unreal! I hope what you quoted for labor was well worth it, since it's extremely hard on your body replacing a transaxle on the ground.

[@naveenthemachine]

Leaking torque converter!? In a Toyota? 😧 I thought Toyota transmissions were bulletproof.

[@Steveo_00700]

I thought the same thing.

[@johnscovel3170]

@@Steveo_00700 they were till they started being assembled in the states .back when made in Japan bullet proof!!!!

[@Steveo_00700]

@@johnscovel3170 , So true.

[@thetechlibrarian]

They are, but like anything it’s going to depend on how it was treated and even known good cars can have rare issues,and even the opposite known bad cars can have the rare one that runs and lasts for a long time, I also believe this is the first year for the 8 speed in the Camry.I don’t understand why they wouldn’t replace it under warranty?

[@jamram9924]

Aisin transmissions are excellent transmissions. They’re even used in Volvos. This leaking seal is an exception. Perhaps a poorly sourced seal from Taiwan/China. Denso has over 20 factories in China

[@beerwrenchgarage]

So glad to see a pro struggling the same way I did when I did my first FWD tranny on jackstands in my garage! Good video, thanks!

[@LetsDriftMedia]

Thanks! Yea ive only dropped RWD trans on jackstands. FWD def is more work. but can be done!

[@foxtrot9711]

That was quite a lot of work. Nice tutorial. Keep up the good work. Cheers.

[@NisSubieTechA]

If you have to drop more transmissions, consider the hb trans jack. I used that on my 240 clutch job and it made the job easier. The issue is that you have to jack up the car higher.

[@TheMarcusEdits]

So I took my car to the dealership for weird rpm issues. It came back with an error code p07457f. Which means A Solenoid is stuck and was told that I had to replace the entire transmission instead of just that part. So I’m asking if that’s true or the dealership trying to get $7000 out of me? 2019 2.5 litter XSE model camry

[@believejesusislord578]

I just had the same happen on a 2018 xse - seems these transmissions have some issues - what’s your mileage? Mine is 110k

[@dougsweldingfabrication953]

Damn son..... Enjoy being young, when you're able to do that work on the floor. If I did that, I wouldn't be able to walk for a week. Excellent video... Thank you

[@n.c.2537]

I hope this is not a common issue for these Camrys 😬 Great job by the way 👍

[@VeganAtmosphere]

Is it?

[@jeffflewelling1703]

Had a Newfie tell me that he backed a car over a ditch and swapped out the tranny in minus 20 degrees weather.

[@kevinkieel6778]

Big jobs like these are always great when your not on the clock. It's when I do my best work. You need to trench out your foundation and maybe blow out that ceiling to put an inground lift in. Life will be so much easier, especially if your going to continue to take on more home jobs. But on the ground electric HD motorcycle jacks come in handy for trans jobs (they have the perfect frame to secure entire trans and even engines under 600lbs)

[@LetsDriftMedia]

Yea nice being able to take a break and walk into the kitchen for a snack whenever as well lol. I have 9ft ceilings in there and the big beam at the roof is a support beam for the 2nd story of the house so cant really do much about that. I am considering getting a bendpak half lift. basically a 2 post lift with half the height.

[@RideOrangeKTM]

I'm going to college to become a mecanic! Your videos are a aspiration. Hope to become half as good as you! Keep up the good content man!

[@ONeal397]

Go to independent shop and start from the bottom up

[@LetsDriftMedia]

Join the discord. Alot of helpful info for new techs.

[@alexfranco5831]

Great video, you covered all the bases and its crazy you did it at home !

[@LetsDriftMedia]

a mans gotta do what a mans gotta do ! Thanks for watching!

[@patrickconfer3592]

A lot of trans are dropped in driveways using all kinds of crazy techniques! Lol

[@johntlatelpa5911]

And here I thought we were having another day in the life of Toyota tech in the opening video 😂😂

[@mikeholt3545]

That's the problem with US production toyotas not nearly as good as j vin

[@guitarTennisCarHomeFixFlying]

I got a J Vin, 94 Lexus es300, 45k miles, got it for $5k, smooth as silk, thru some ck engine codes but I think it was a loose neg battery cable after a garage repair where tightening it up overlooked

[@Huffy_Turns_a_Wrench]

Damn! Much respect! No lift, and by yourself! 1st class job!

[@jasonlax2102]

Is the new transmission garbage ???

[@SimonHumfreyChannel]

Bring back the 4 spd automatic toyoda

[@gflores7018]

Great video resolution. Great job. A lot of work Keep it coming with videos

[@gabemelts7149]

that isn’t easy to do and i give u major props brodie keep up the good work. i enjoy these walkthrough videos!

[@james5274]

Nick, you're a badass doing a sub frame out tranny job on Jack stands. Hope you made some nice side job money on that one. Great job 👍

[@LetsDriftMedia]

Was def worth the extra money but man did my back hurt the next day lol

[@mrren2927]

@@LetsDriftMedia I hurt my lower back too for doing the side job few weeks ago. Then I still not getting better even though i visit physical therapy for many times. I hope you get better soon.

[@jamram9924]

A technician can dismantle about 80% of any Toyota product with an 8,10,12 and 14mm wrench/sockets.

[@ronc1422]

Great video, very detailed and the best one I've seen doing while leaving the motor in. Appreciate you posting this thank you.

[@dankam830]

Nice work! Sure looks like a tough job but great to understand what it takes to do with a home shop. I’ve seen in another video where the shop pulls the engine out with a hoist and he claims it’s way easier that way. What do you think? Spares the subframe removal and less time on the back assuming one can get an engine hoist.

[@LetsDriftMedia]

Yea would be way easier with the engine out, but if you were doing this on the floor I feel there would still be alot of working on your back to pull the motor with trans not sure which would be easier to be honest.

[@rafaelanico4530]

Mi Toyota RAV4 se estremece a veces cuando voy entre 55 a 60 kilómetros. Qué puede ser que produzca eso?

[@JohnLogger]

What the hell the seal was bad on a newer car?also is it easier to pull the engine for this job?or is it super heavy with a v6?

[@BayStateFishing]

These Camrys have been having torque converter failures for a decade, so sad

[@LetsDriftMedia]

This one wasn’t a torque converter fail but yea last generation had a whole lot of em coming out at the dealer.

[@FlexSZN23]

Only on 12-14.5 model years. They fixed it when they refreshed the 7th gen

[@BayStateFishing]

@@FlexSZN23 I had a 2011 Camry that had transmission shudders and hard shifts at only 85k miles. I ended up just selling it. I’m just a little bitter that I had tranny problems on my first Toyota. I’ve never owned a car with transmission problems before until that car

[@cuh9078]

Don’t let Scotty Kilmer see this vid 😂

[@kevmoney7000]

When replacing the transmission on a 2018 Camry. Does the car require any type of “relearn” or reset to the shift logic on the transmission ?

[@LetsDriftMedia]

Yes a relearn for the trans ecu is required when installing a new trans, or torque converter, but if you skip that step it wont be the end of the world. Ive seen it plenty of times when I worked in the dealer.

[@JimmyMakingitwork]

I remember my younger days when working without a lift was a common trend. Those days are over for this kind of work, lol. Good on you though, nice work!

[@Toguro-oy3ld]

Great vid. I am parting out similar Mazda now. I got a 600 lb cart because I’m going to pull the whole cradle w/ the engine and trans together, in my driveway.

[@donniev8181]

Big job to do by yourself! That seal seemed a little sus, it was like it wasn't fully seated to begin with? Also, when I go to do a transmission drain and fill, the operating temp should be 105°?

[@LetsDriftMedia]

Customer did purchase this vehicle used so who knows the history, and yea that is the proper way to set trans fluid on these. They dont take that long to warm up though.

[@FranciscoJimenez-bb7fk]

I heard harbor freight scissor lift will make subframe with powertrain removal easier

[@cruz411]

How much did you end up charging the customer for the work?

[@LetsDriftMedia]

$1200 in labor. Job is rated at 15hrs.

[@cruz411]

@@LetsDriftMedia what was the stealership trying to charge?

[@LetsDriftMedia]

@@cruz411 woulda been around 2250$ or more since they charge 150$ an hr also woulda taken a dealer a few days

[@lunalancer5971]

Sponsored by Michelob Ultra

[@LetsDriftMedia]

Hey hey that was from the night before 😂

[@MrMJJ23]

Why isn’t isn’t covered by warranty?

[@r1dg3xrac3r]

too many miles on it ?

[@LetsDriftMedia]

Had 90k

[@hachuelo69]

A relatively new Camry with a blown transmission seal? Not cool Toyota not cool.

[@marksmith6104]

Bruh, wishing you had that 2 post lift.

[@THEpwaylistMAN]

Any tips for the V6 model? Mine is a 2012.

[@sergioamaya3754]

man i want to be a mechanic bad !!.. how did you learn your skill ? ive been watching lots of videos on youtube and learning alot about fixing cars but i need more hands on training where do you suggest i start?

[@LetsDriftMedia]

Join my discord. Alot of helpful info there

[@884runnerr]

I have a 2013 Prius that need head gasket replaced, let me know you willing to work on it I’m in socal area.

[@LetsDriftMedia]

email me [e-mail]

[@884runnerr]

@@LetsDriftMedia thanks!!!! Just emailed you

[@mark6020cc]

Haha never got a chance to take home one of my uniform when I quit Nissan. I did a lot of CVT transmission at nissan..

[@SpecRB]

How is it not covered by warranty? Dafuq

[@LetsDriftMedia]

90k miles on it

[@whats4dena1985]

Lol man this is so complicated but make it seem so easy!

[@LetsDriftMedia]

It’s not that bad ! After you done a few there all not bad lol

[@azharhussain2608]

Easy way to remove driver side fender & instal transmission.

[@Decourcey1]

I wonder how much that seal cost.. and how much it would cost to get the repair done at the dealer?

[@LetsDriftMedia]

Seal cost 15$ but it’s a 15hr job so labor looking like 2 grand +

[@frankgilligan1740]

Seal is around 10 bucks. Labor is around 12 hrs. So gonna run you well over $1000. Idk how much the dealer charges per hour of labor but it’s around $100 at mine

[@CESMOBB]

@@frankgilligan1740 $187 at the honda dealer I work at 🥴

[@Boney010]

I kinda hate torque converters lol. Last one I dealt with was on a nissan. Wasn't close enough to the flex plate so I couldn't thread in a bolt. Luckily, there was enough room to thread a longer bolt and yank the converter close enough to thread in the appropriate bolts.

[@LetsDriftMedia]

BONEY!

[@Boney010]

@@LetsDriftMedia I almost never post in comments sections lol. I'm one of those people. Thanks for the video, really cool.

[@edwindominguez9431]

Have you considered quick jacks or a max jack lift for your garage ?

[@LetsDriftMedia]

thought about quick jacks but dont think its worth the price 2ft of lift lol.

[@maxrx7]

My neck hurts just imagining doing that

[@charlesbarkley2497]

It would’ve easier just to leave the upper engine mount and trans mount connected and drop the subframe. The upper mounts attach to the body and not the subframe and should support the weight of the power train. Just a flat rate way of thinking

[@LetsDriftMedia]

Good point. I’m so used to having a lift so doing it on the floor had me a little lost lol.

[@LetsDriftMedia]

Also I was thinking it was going to be like the previous gen camry where the trans mount is attached to the subframe lol

[@charlesbarkley2497]

@@LetsDriftMedia tell me about it I just left the dealership a few months ago and work at a fleet shop where we work on heavy equipment and don’t have lifts, so I’m doing side jobs at the house now and have to do them on the ground it sucks

[@LetsDriftMedia]

@@charlesbarkley2497 hey me too lol my fleet shop at least has lifts tho that we can use for personal use but it’s not local so jackstands it is for my side jobs lol

[@charlesbarkley2497]

@@LetsDriftMedia I’ve done tranny on a 98 I think and was using pole jacks to support the engine and swung the subframe out of the way. It ended up bitting me in the ass because everything shifted when I removed the tranny and had a hell of time trying to line all 4 mounts and subframe to its home. Love the content and very informative for these younger techs, got to pass it on

[@brandenchurch8652]

I’m a Honda tech I Replaced an engine on my in-laws civic down in my hometown on jack stands. It wasn’t terrible getting everything undone but Never again haha if someone wants something that heavy done they can tow it up to my dealership and I’ll do it in a Saturday haha a job that’d usually take 3-6 hours took about a day and a half.

[@chrisavalos7172]

Yeah dude it's hard doing jobs on the floor when you're used to using a lift everyday lol

[@LetsDriftMedia]

dam, and hell yea think this job took me about 9 or 10hrs at a casual pace, as compared to 4 or 5 hours at the dealer lol

[@noahtorres438]

Hey what’s up ? I have a tundra 2012 with 180,000 miles I have no record of replacing trans fluid ever Should I replace it trans fluid or leave alone ? I hear plp it could slip after ?

[@nateTrh]

I would do a drain and fill, don't flush it. Use Toyota genuine fluid and you should be good to go. I would be more worried about the diff fluid, especially if you tow a lot.

[@noahtorres438]

Thank you!!!!!

[@user-tb7rn1il3q]

You definitely need to change it. Don’t listen to the mechanics that say you should leave it at high miles. Even if the fluid is dark it’s still doing the job, just not very well. Do 3 drain and fills. One now, the next oil change, and then the oil change after that. If it starts slipping it was about ready to go out anyway.

[@guitarTennisCarHomeFixFlying]

I just bought a 94 lexus es300, california car, 45000 miles! Made in Japan, anything i should look out for? It thru a tranny solenoid code and an igniter code but i think my garage forgot to tighten the neg battery cable after replacing the timimg belt, fingers crossed code dont come back, where are u located, i am in NC, no doubt u could fix anything on my old Lexus

[@acsumen1]

you are such a good guy. great job😍

[@TommyG11814]

Great work Nick you make it look easy, I am a bit suspect of how easy the press was on that O.D .of the seal.

[@LetsDriftMedia]

Yea was a little weird. Car hasn’t came back yet so assuming it’s fine lol

[@rustyzeetv2948]

Great video . love your content . cant wait start training end of march

[@alecoronel10]

Nick are you willing to fix my 4runner lol it has some codes that I cannot get rid of!

[@LetsDriftMedia]

whats going on with it?

[@alecoronel10]

@@LetsDriftMedia it has the P0171 & P0174 my mechanic claims it’s not the 02 sensors or MAF. The codes also go away every now and then too If that’s of any importance. But yeah!

[@MrBeefsnorkel]

i was at yota for 6 years - know what i miss? doing a transmission replace on a first gen tundra. dont have to pull any exhaust at all, little plate on the bottom for easy TC bolt access, dont even have to pull the starter. dont have to pull the intake etc. so gravy. now a days 99% of every ticket i get is replace engine or replace transmission at a different azn car brand dealer. as time goes on, the new tech on these cars is cool. but complicated to diagnose, and everything is made more annoying for no reason at all. prime example: the location of the TC bolts on these FKS motors! WHY?@?@?

[@gustavedorantejr4372]

Cars not even 5 years old yet wow

[@Eli-wt5zx]

Yooooo, is this a common problem with these camry's?

[@LetsDriftMedia]

Not at all never seen it unless someone damaged that seal when removing a trans previously.

[@horsepowerauthority3389]

do you think you can remove the front sway bar with out lifting the engine like the manual suggests? thx

[@wilbertargueta6114]

When the transmission of the 2020 Toyota Camry breaks down, I wanted to know if the front tires were vibrating and how much it cost you to replace the transmission. Thank you very much.