Toyota Engine Rattle Fix

[@andrewjones2167]

I did the same with my 2.4l toyota 2 years ago. Problem fixed. All pro techs said that VVTi had to be replaced (only several grand with labor) lol! Don't forget to properly reset the new tensioner by slightly rotating the crankshaft in the opposite direction. It will open the little hook on the tensioner and allow it to extend and self adjust.

[@Ezq95]

My 2012 sounds some what. Not sure.

[@Steve0885]

Two different issues bro

[@colinjeremiah7815]

I have that problem on my 2003 avensis 1.8 petrol

[@nicholasmccarthy6615]

“Can’t move this by hand”…..*moves by hand

[@goldcapmedialab5584]

😂 crazy

[@annasmadu206]

Thank you for this video,my 2005 corolla started making the rattling noise , now I know the problem. Mine the noise is there constant even when I have driven the car for long, the noise doesn't go away.

[@ishalljr]

did this fix it?

[@64arguz]

Your my hero ! Appreciate the “tensioner” part itself , needed to retract mine 👍

[@nestorautorepair]

Thanks

[@unclebs4732]

Thanks for your help, I'm going to buy a 2007 Corolla with 250k on it and the chain tensioner needs changed. With your help, this will be a breeze.

[@nestorautorepair]

You're welcome boss , thanks for your feedback

[@pitpotputpet]

My f*%#ing hero I'm having this same problem in my 09 Matrix. The TSB on this advised replacing the whole timing system - an actual nightmare. Thanks a lot!

[@nestorautorepair]

You're welcome boss , Thanks for your feedback

[@DarthPat1977]

Great video! Helped me fix my wife's 2009 Corolla

[@nestorautorepair]

You're welcome boss , I'm so happy to head that you fix your wife car using one of my video, thanks for your feedback 🙏

[@MarzNet256]

Nice work. You can also release the hook from the tensioner with a screwdriver since you had the valve cover off, which is not required to replace tensioner, but the factory service manual recommends it just to be 100% sure hook is released. I have the same engine with 226,000 miles. You can also rotate opposite direction like 15-20 deg which will tension the slack side of timing chain and press on tensioner, releasing hook. Then turn clockwise.

[@gregarizmendez5275]

Great video. My 2010 Camry SE just started making that rattle noise a week ago. 90k miles. Definitely will check the tensioner out. 👍

[@nestorautorepair]

You're welcome , thanks for your feedback

[@cee1726]

Did you ever get it fix?

[@idontknowwhattoputhere.3572]

How does you car only have 90k miles on it?

[@gregarizmendez5275]

That's what everyone always asks me. It has just got 100k last week. I work about 15 mins from home. I've driven it up the So Cal coast a few times but mostly to and from work. It's been great to me.

[@idontknowwhattoputhere.3572]

@@gregarizmendez5275 they’re great vehicles. ✌️ Camrys are also good.

[@67polara]

I usually use Toyota OEM but in this case, that’s the part that failed. Have you had good luck with that brand of aftermarket ones?

[@nestorautorepair]

Still running I just did a fuel pump on this car last week

[@theroyalcrown9165]

Toyota updated the cam gear design as well as the guides

[@TheShadowCamo]

Thanks Nestor! was a big help, staright forward simple.

[@nestorautorepair]

Thanks for your feedback

[@Teknakill]

So you didn't replace the chain with a new one? And the tensioner magically got the slack out of the chain between the two gears? So that means there is no noise when a chain overlaps gear teeth to get tighter from the tensioner? That would be great if that was the case!

[@rfbftp123]

It's vvti....

[@hernandezdiaz3769]

Gracias por sus instrucciones de mecánica. Se le agradece Amigo.

[@nestorautorepair]

De nada gracias por su Apollo

[@hernandezdiaz3769]

Yea...that's good one. I do appreciate your advice, good friend. Salute from El Salvador, Centro América. Tkank you for your pacience, big bro."MAY GOD BLESS YOU OVERALL"🙏

[@nestorautorepair]

Gracias brother same to you

[@ethantate2366]

Got the same rattling on my 06 matrix, changed the spark plugs and it helped a little. Gonna do this next. Thanks!

[@nestorautorepair]

Ok boss good luck

[@justnature135]

They didn't even show the sound of what it sounds like

[@dirtbikedemon0841]

Is this a 2.7

[@nestorautorepair]

1.8L

[@jp7489]

Nice work 👍 I have 2008 Scion xB 2.4 L would this be the same procedure to replace on my car?

[@nestorautorepair]

Yes thanks I'm sure they are the same

[@focusrsawd5034]

Good job bro, I have a 05 vibe pretty much as a matrix same engine . So when I start it's making the rattle sound like it's coming from pulleys I change power steering pump and new altenator and it makes same sound , so I guessing it's the timing chain is loose.

[@nestorautorepair]

Yes sir I'm sure this will be your fix, thanks for your feedback

[@johncronk4865]

My car doing the same thing Toyota Venza 4 cylinder . I've checked everything under the hood and change heat shield, still have a loud rattling when first cranking up and when give it the gas

[@DavidMorris-yq4ge]

Even a brand new one will move by hand. It's supposed to. The only time that the tension increases is when it is installed and the oil going into the tensioner increases the pressure/ tension on the chain.

[@Justin-op8gg]

Hey, do you think a long drive where the oil is burned below the stick would cause the rattle to start? My 09rav4 is rattling a bit now after a 5k drive. Oil is below the stick so the oil needs a change. Hope it fixes the sound at the same time.

[@elijahjohnston3172]

​@@Justin-op8gghappened exactly like that to me, rattling started afterwards. Guessing the tensioner got wrekt

[@mns4543]

Hi there Do you have any workshop ?

[@nestorautorepair]

I do know yes

[@jonboz7585]

Excellent video! Do you know if the chain tensioner on a 2012 Honda Fit is similar to change out? Thanks for your info.

[@nestorautorepair]

Thanks no on Honda they are inside

[@jonboz7585]

@@nestorautorepair OK, thanks for the info. Keep up your great presentations.

[@AZsteamops]

only if you had a video of how the noise sound. Now i'm stuck between water pump or timing chain tensioner smh thanks, great content

[@nestorautorepair]

Take the main belt off and star the car and see if the noise still there

[@sadboycali]

I'm between the vvti rattle or time chain lol I think it's the timing chain tho. It rattles on startup. Stops for a few seconds. Then randomly rattles. When I give it gas it rattles so I'ma check the timing chain when I get a chance

[@nestorautorepair]

Wow ok we'll it can still be the here , open the valve cover and see if the chain is loos

[@sadboycali]

@@nestorautorepair it was the timing chain 😄

[@nestorautorepair]

Wow , thanks for sharing

[@jameelfoster2013]

I just got my mom a 2009 scion xb and it's making crazy noise and it's has great power! But that noise! She gone love it! I was gone change the whole engine thank you so much!

[@nestorautorepair]

Thanks for your feedback boss

[@southerndude8250]

That chain looks really loose, so I’d imagine it’s got a constant rattle right? My rattles for a split second on start up. Do you think it would be worth me bothering with it at the moment or just keep a ear out to see if it gets worse then fix it? Like I said, it’s only on start for about a second then no rattle and smooth operation. I have the 2013 Toyota Corolla.

[@nestorautorepair]

Yeah that's how it start and it will get worse just keep an ear on it yes

[@southerndude8250]

@@nestorautorepair Cool, thanks 🙏

[@nestorautorepair]

Yes

[@weaverdreams]

I think you should replace the tensioner ASAP. If it keeps getting looser you’re gonna have metal on metal and pieces of the sprocket are going to break off and end up in your oil. Then you have to replace the sprockets too and that’s an all day job maybe even two for some people! $$$

[@nestorautorepair]

Ok

[@irelandsown6466]

Is this suppose to be done for maintenance?

[@nestorautorepair]

Not really , this will happen when you don't change your oil on time or use cheap oil

[@irelandsown6466]

@@nestorautorepair Thank you

[@nestorautorepair]

You're welcome boss

[@philliptaylor5981]

Nice tensioner plate gasket....lol...thanks for the funny vids man!

[@pontgta1]

I like the jack!

[@nestorautorepair]

Thanks boss

[@ishalljr]

thank you. what kind of jack is that? do you have a link?

[@nestorautorepair]

Thanks sure I will send you the link later today

[@ishalljr]

Link?

[@MrSweetaz]

Hi, good video. Did this fault make the check engine light come on?

[@nestorautorepair]

Thanks boss no light ON , but if you are getting code for timing then more likely your timing chain guides broke

[@elonmust7470]

Wow that previous silicone job was scary!

[@nestorautorepair]

Yes lol

[@roshi98]

Could be worse. They could have used spray foam.

[@elonmust7470]

@@roshi98 oh lord

[@miguelmatias7168]

Buenas tardes vi sus vídeos y tengo una pregunta tengo una Toyota venza 4 cilindro y me ace lo mismo.dónde está ubicado el tensor de la cadena de tiempo?

[@nestorautorepair]

Hola Buena que año es?

[@miguelmatias7168]

@@nestorautorepair buenas 2009

[@miguelmatias7168]

@@nestorautorepair buenas tarde es del 2009 4 cilindro

[@nestorautorepair]

Sino lo miras en El MISMO Lugar ESO lo tienen adentro lo lo puede aceder asta que quite la tapa del timing

[@miguelmatias7168]

@@nestorautorepair Ook gracias

[@dealerauctionnightmare4689]

Can this be done without removing the valve cover?

[@nestorautorepair]

Yes , I just remove the cover to confirm the problem and the fix

[@dealerauctionnightmare4689]

@@nestorautorepair unfortunately this didn't cure my problem. It did get a little quieter but, I'm gonna have to change the VVT sprockets.

[@efraingarciaescalante2824]

hola señor nestor, hace unos días cambie la junta de la tapa y vi la cadena y la presione hacia abajo y tiene un poco de juego pero no tanto como se muestra en su video. así que la cadena no debe de tener nada de juego al tacto? es la primera ocasión que veo su video y me gusto la explicación. gracias y saludos!!!

[@nestorautorepair]

Hola Efrain si la cadena tiene que estar Bien dura nada de movimieto, gracias por ver mis video ,, saludos

[@efraingarciaescalante2824]

@@nestorautorepair gracias por su respuesta. Se lo agradesco. Saludos!!!🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️

[@nestorautorepair]

De nada brother suelte!! 💪

[@patrickmcguir11]

Nestor todo bien? Tienes algun video mostrando como suena cuando el tensioner no esta bien? Gracias

[@nbbo9049]

So I don’t need a whole new chain? This tensioner should be able to solve it?

[@nestorautorepair]

Corret just get the Tensioner and see

[@nbbo9049]

Just ordered one, thanks for the vid hopefully it’ll solve it.

[@nestorautorepair]

Yes sir

[@nbbo9049]

@@nestorautorepair it didn’t work!

[@homedaily6570]

Did it ran like a top n not rattling anymore after a new tensioner installed?

[@nestorautorepair]

The car come by last week still running strong no rattlering at all

[@callmebackfriday2]

Does that noise happened in the cold weather or it happens all the time. I have similar noise on my 2009 Corolla but not sure it is starter or chain. The noise sound like, when car starting and I try t start again like starter gear hit flywheel gear but not 100% sure. So far, It seems like only happen in cold or car stayed over night. After car warm up, no more start up noise. Thanks for the video. Thanks in advance.👍

[@nestorautorepair]

This noise was there all the time but stronger when you first start the car

[@callmebackfriday2]

@@nestorautorepair Thanks for the information.

[@nestorautorepair]

You're welcome boss

[@pinoysidehustler]

can I replace the tensioner without removing the valve cover?

[@nestorautorepair]

Yes you can

[@yadiscience3451]

ئيشيكى جوانت كرد هةربزى Best wishes

[@nestorautorepair]

Ok thanks

[@ronrandall7118]

I've replaced the timing chain tensioner and the intake VVT gear and yet still the the VVT rattle on cold starts. The top chain guide showed no wear. Why? I change my oil every 4K and owned the car at 20K miles. It now has 92K miles. No check engine light for the VVT solenoid.

[@nestorautorepair]

Maybe one of the side guides is broken

[@davebenji2848]

I have a 98 Camry makes the same noise what kind of timing chain does it carry is it the mettle or the robber belts thanks for that video..

[@nestorautorepair]

Your 1998 Camry takes timing belt rubber

[@jrm163]

Good video! How to tell if the noise is from the chain or VVTi please? Thanks!

[@glennmanchester5696]

The chain tension and slack is the reason for the noise either way and the tensioner could be getting weak and the vvt makes it tremendously worse

[@eduardoheredia2315]

Adonde te encuentras amigo??

[@nestorautorepair]

Hola en Sterling va

[@eduardoheredia2315]

@@nestorautorepair yo vivo en Virginia tambien veo q eres un buen mecanico estoy a 2.40 horas de sterling

[@nestorautorepair]

Oh gracias,, donde tu vibes?

[@idontknowwhattoputhere.3572]

You didn’t show where you put the tensioner. What exactly did wrenching that wheel do? I’m confused.

[@nestorautorepair]

By turning the big wheel it to make the tensioner come out to the max

[@Doomzdayxx]

Nestor, thanks for the video. My 2002 Rav4 2.0 liter is rattling and I suspect it's the chain but haven't looked to check the tension yet. It starts rattling about 30 seconds after cold engine starts running. i will check under valve cover tomorrow. Do you have any advice on that particular engine and part replacement if that is for sure the problem? Thanks again.

[@nestorautorepair]

Yes sir they are all the same , if you want you can take the serpentine belt off and start the car to make sure the noise is not outside

[@Doomzdayxx]

@@nestorautorepair oh yeah I definitely did that already and it wasn't. Btw what a bitch to get that belt on haha. Awesome man thanks.

[@nestorautorepair]

Lol yes sir any time

[@phillippardo5712]

Great video, thanks! Did you replace gears also? I heard to always replace gears when you replace chain and tensioner..

[@nestorautorepair]

Hey thanks ,, I only replace the tensioner and car still driving good no noise at all

[@NightSociety]

Can this replacement done without opening the valve/top engine cover?

[@rfbftp123]

Yes that is just to make sure that's the problem

[@ariellopez8736]

Hi Nestor. I replaced the timing chain tensioner and followed these instructions but I was told later that after installation and spinning the crank clockwise, you’re also supposed to spin it counter clockwise. I did not do this and heard a loud rattle at first start up but it went away. Is it necessary to spin the crank clockwise and then the other way for proper tension?

[@nestorautorepair]

No that's not true bro , never go back

[@ariellopez8736]

@@nestorautorepair thanks for that peace of mind!

[@nestorautorepair]

You're welcome boss

[@MrShoryuken1]

Guessing you've already done this repair buddy but yes the Toyota manual specifically says to turn the crank anti clockwise until the hook on the tensioner unlocks. This should only take a very small amount of rotation and you'll hear the click. Then crank clockwise to extend the tensioner, you'll hear a series of clicks.

[@nestorautorepair]

Yes

[@damianeqb]

the rattling starts about 30 seconds after starting the engine on cold, is it a chain?

[@nestorautorepair]

Oil pump to slow

[@damianeqb]

@@nestorautorepair What should be done in this case?

[@emmasonerie5153]

Hello thanks for the video. My toyota wish has a rattle when idling and low speeds which leaves on acceleration, could this be the issue as well? Thanks

[@nestorautorepair]

Hi Yes it can be

[@VILLEGAS76able]

So you turn it one whole turn clock wise?

[@nestorautorepair]

Yes

[@justinsincoise6693]

Thank you. That helped me alot.

[@nestorautorepair]

You're welcome, thanks for your feedback

[@gabopenav]

Is this the fix for the chain rattle you can hear clearly when the engine is idling? I have that weird chain noise that sounds like something is loose inside the engine in a 2011 Rav4

[@nestorautorepair]

Yes this was the fix

[@mwngw]

Where is the tensioner installed? It looked to be outside the block.

[@airon6864]

I have a 2012 Camry SE and I’m sure I have this problem. How much does it normally cost to replace this?

[@nestorautorepair]

Not a lot under $100

[@josephpuchel6497]

I thought there was a chain guide at top Nice video

[@nestorautorepair]

You’re welcome boss no guide on top like Chevy

[@GlossaME]

And the chain will last a life time?

[@nestorautorepair]

As long you keep up with the oil change yes

[@yousseflahbil679]

I have 1015 toyota avalon same issue ruttling in every start do think I have same tensioner and where is located in V6 3.5L engine I need help please

[@nestorautorepair]

Hello I think on the V6 you need to remove the timing cover

[@yousseflahbil679]

@@nestorautorepair so , is not DIY job here in ny the mechanic tells you to change the engine instead of lot hours of labor

[@nestorautorepair]

Wow

[@veronicastewart1959]

My 2008 Toyota Corolla was making noise and now the motor is spinning fast no start. Can you tell me if this is what it could be ? I've asked folks when it was making the noise and of course no one knew what it was, I guess I'll take the valve cover off and go from there.. I wish I had found your channel before it broke down ! Thanks for sharing and fingers crossed and hope I can fix her ..! Oh new subscriber too I will tell folks about your channel..

[@nestorautorepair]

You're welcome boss thanks for your feedback ,, if I was you before removing the valve cover remove the spark plug and read the compression need to be 120 and up each sylinder

[@Filantropo7]

Nice work!! And, it's the same for a Scion xd 2008 ??

[@nestorautorepair]

Yes sir Same, thanks for the feedback

[@BeastMode-ts6eg]

How much for this repair?

[@nestorautorepair]

$180

[@BeastMode-ts6eg]

@@nestorautorepair your kidding me. I just sold the car this weekend cause i thought it would be a few thousand to fix.🤦🏻‍♂️

[@chrisdgg30]

Doesn't the timing get off when you crank the pulley with the car off?

[@nestorautorepair]

No

[@chrisdgg30]

Not sure if the tensioner is my problem, the rattle is not very loud and only lasts a second but I can hear it and it's annoying lol

[@Z-Ack]

If your chains been beating against something and loose shouldnt you replace the chain also?

[@alexhammond6436]

Will I need to re time the engine after changing the timing chain tensioner?

[@nestorautorepair]

No you don't just rotate the engine like 4 times

[@alexhammond6436]

@@nestorautorepair thank you

[@nestorautorepair]

You're welcome

[@johndeleon7618]

how did you get slack out of a chain with two sprockets that are suppose to move at the same time. is it still in time.

[@nestorautorepair]

The tensoner will do the job

[@benteyssen5720]

Hi, I have now a short loud rattle after cold start. But if I turn it off and on again, there is no short rattle anymore. Do you think it's the tensioner or the VVTi-camshaft making this noise?

[@nestorautorepair]

I will say the tensonador

[@davidroberts7744]

Vvt selinoid if it was happening every time it would be thetensioner

[@omarbari4861]

Ben, did you find a fix to your issue?? Please help me if you did. I think I have a similar issue. It comes and goes. Even if I restart the engine. Strange. I checked my vvti solenoid and cleaned it. Works perfectly when checking with electric current

[@omarbari4861]

@Ben Teyssen

[@omarbari4861]

Did you find the problem. And solved?

[@afgluda]

Do you have to change valve cover head gasket?

[@nestorautorepair]

Is recommended yes, but it it was not leaking don't worry about it, just add a small bit of atv on the small crack where the engine meet , some engine 2 corner some engine 4 corner

[@rustyshackleford4192]

Is there such thing as overturning the engine causing too much tension? when releasing the hook?

[@nestorautorepair]

Not at all

[@rustyshackleford4192]

@@nestorautorepair gotcha, thanks for the reply. Doing this soon.

[@nestorautorepair]

Ok best luck boss

[@pshluelhk]

Do I need to replace the valve cover gasket?

[@nestorautorepair]

Yes is recomende

[@yossimahler4650]

Is this a 2 AZ engine?

[@nestorautorepair]

Yes

[@jrjr8574]

I just put a new valve cover gasket in maybe 700 miles ago on my corolla do I still have to put a new one if I do this job ?

[@nestorautorepair]

Not really if you did not add silicone you are good to use it again

[@aricpaul3199]

You're a real one nester thank you

[@nestorautorepair]

Thanks boss , thanks for your feedback

[@bammartin6598]

When You give it gas does it make louder noise before you you fix the problem ?

[@nestorautorepair]

Yes sir it did

[@JR19k]

A video before of the noise would have been nice. Thanks for this video though bro

[@nestorautorepair]

👍

[@Ridelow97]

Did you had power loss before you fixed it? Because my Yaris has a rattle and has power loss as well

[@nestorautorepair]

Not really

[@nelsoncanelas1978]

Damn I did this but instead turned the pulley clockwise with out the serpentine belt on.And when I turned on my vehicle a knocking noise on the engine started up. Is my engine done for or can I re-do the procedure again but this time how you showed it on here?

[@nestorautorepair]

Wow , ufff I'm not sure if your noise is coming from internal

[@nelsoncanelas1978]

It’s coming from the inside. I took of the top cover and my chain had a slack on it I’m guessing that’s where the noise is coming from?

[@nestorautorepair]

Mmmmm ok but did you fix it the way I did it with the valve off so you can see if you did it t correct ?

[@nelsoncanelas1978]

Im about to re-do the whole process but this time I’m going to turn the engine clockwise with the serpentine belt on since I didn’t do it like that the first time. I’ll keep you updated

[@nestorautorepair]

Ok thanks

[@vileproductions8511]

is this a noise that goes away as you drive ? cause my rattling noise goes away .. it’s mainly in start up

[@nestorautorepair]

No this noise will not go away if you are having the same problem.

[@t.goodley586]

How many miles were on this engine?

[@nestorautorepair]

143k

[@alphanumericskeptic]

Questions for Nestor Auto Repair... Why did you use a socket and wrench to manually turn the engine to get the tensioner to release? Why didn't you just turn the engine using the ignition switch?

[@rfbftp123]

On another vid i watched they turned car on and it died a few times, guessing ecu doesnt like the vvti changing tension while starting up lol

[@alphanumericskeptic]

@@rfbftp123 Thank you for your opinion. Much appreciated.

[@jameelfoster2013]

God bless you!

[@nestorautorepair]

Thanks boss you too, thanks for your feedback

[@NitroCharged]

Will the chain always be loose between the camshaft gears or can it be loose below and still be the problem? I checked mine and it was tight up top.

[@nestorautorepair]

Need to be tight all the way

[@soldado23]

Are you from Puerto Rico? I think I hear Coquis in the background!!! Dimelo

[@nestorautorepair]

Hahahahaha klk I'm dominican

[@soldado23]

@@nestorautorepair ohh my neighbor!!! Man, after posting the comment I heard you talking Spanish and I was like: Es Dominicano!! Great Video bro

[@nestorautorepair]

Gracias Soldado 23 , ya tu sabe klk con klk , estamo selca ,, donde tu vive?

[@soldado23]

@@nestorautorepair yo estoy en los Estados Unidos, Georgia.

[@nestorautorepair]

Oh ok to en Sterling va

[@Danni982]

My avensis is only doing this at cold start could it be this?

[@nestorautorepair]

Yes

[@robertbarnes3915]

Great video! Thanks

[@nestorautorepair]

You're welcome , thanks for your feedback

[@jeffgalaska9277]

How much to do this job and where are you located?

[@nestorautorepair]

I'm in Sterling , $150

[@jeffgalaska9277]

@@nestorautorepair dang...i would pay $300 to get mine fixed in Milwaukee. Thx for your response

[@nestorautorepair]

You're welcome boss

[@danielvelezdiaz5851]

q bueno! recién compré un 2003 CE,y encuentro este video.muy útil..gracias x compartir!!!.

[@nestorautorepair]

Gracias y felicidades con tu nueva compra Daniel

[@OSCARANDRES039]

Tigre y no sera tambien el vvt gear??? E visto otros video que dicen que es la gear esa

[@nestorautorepair]

No en este caso solo fue el tensonador

[@omarmalyomarmaly9323]

Does zuiko timing kit could be used to replace parts ot its better to chouse the original parts?

[@MartinKyleMalabanan]

So its not the camshaft gear? I did my research and most of them says the noise is because of the gear

[@vitaliyglibitskiy5908]

Thanks for video good job bro

[@nestorautorepair]

You're welcome boss

[@lamexalani3628]

In my own car toyota camry 2003 the chain is hitting the side timing chain side cover. Can it b caused by this same part

[@nestorautorepair]

Same problem , but open the top and make sure the top guide is still there

[@Locutus_lives]

Thanks for the video my friend.

[@nestorautorepair]

You're welcome my friend , thanks for your feedback

[@SamieMan1]

So my 2003 corrola had that rattling and then one day it just didnt turn on.. i took out the valve cover and it has that same slack on the chain, should i try replacing tensioner first or should i just replace the chain and all?

[@nestorautorepair]

Well if the car still crank it need a new chain because you want too long and the chain stretch and jump timing , but if is not cranking then it may be way too late engine lock up. Hope not

[@SamieMan1]

@@nestorautorepair okay thanks, yes it cranks and sounds like it wants to start, i havnt checked the timing yet, im just going to do the whole timing chain job.

[@nestorautorepair]

Yes is got too loose and it jump timing

[@Dicofol1]

Great tutorial. What happens if we don't repair this can it break something?

[@nestorautorepair]

Yes the engine will jump timing and that will be a done engine will need a new one, thanks for your feedback Dicofol

[@vindieu]

exactly as he says. this problem not repaired = wrecked engine, no salvation.

[@darktinoreygamer5066]

@@nestorautorepair not really bro. It will bend valves. Papi.

[@nestorautorepair]

Ok papi

[@bidenkidsniffer4926]

@@vindieu i have not found one person yet in any forum or youtube comments that said it wrecked their car. Seen some with over 200k miles and still makes noise on cold start n never caused issue

[@spudypuddy7236]

So I don't need to change the chain ?

[@nestorautorepair]

So sir

[@Osirus37]

Awesome. Thank you.

[@Thehfdlm]

Tengo una 2009 matrix ....y suena igual .. Pero tambien se prendio El check engine .. El taller esta a 10 min ...puedo seguir manejando hasta llegar al taller ?? Me da miedo que sea la timing belt

[@nestorautorepair]

Hola si suena mucho , no lo maneje , echale aceite primero aver si la bulla desaparece

[@Kapatid39]

Bro how about 2011 highlander 2.7l what is the procedure for it?thank u u making siple very imformative video👍

[@nestorautorepair]

I believe they are the same engine bro , so same process, thanks for your feedback boss

[@sleeper5815]

Dam you made it look so easy Thank you .... :)

[@nestorautorepair]

You're welcome , thanks for your feedback Mr Sleeper

[@fadilxheka1232]

Were you able to find the error codes on engine. I have a rattling noise also on my 2007 corolla and it says fault code p0012.

[@nestorautorepair]

Yes

[@ogrogerbeatz5353]

Is this same with Chevy Malibu eco tech?

[@nestorautorepair]

Im not sure this is a toyota