Toyota GR Yaris DIY - How to remove the front bumper

In this Video i show you, how you can just replace your brake pads and discs.
Infos, Questions, Inquiries or want to order some parts?
Just send me an e-mail to:
[e-mail]
Follow us on:
Facebook - / roetheliracing
Instagram - / roetheli_racing

[@boskoo6]

Good video, helped me get through the job. For anyone wondering, yes it can be done with just the included car jack. My own jack was too short to reach the lifting point under the engine bay and i didn't have any sort of ramps on hand so i couldn't lift the car on stands. One thing i discovered is unclipping the bumper from the wheel well is extremely tricky with just steering the wheels away so i resorted to just taking them off. It could maybe be done with some sort of hook tool but you run the risk of damaging the clips.

[@3banga371]

Very helpful tutorial 👌 I have been meaning to install my new Hella horns but now have more confidence to take the bumper off. Thanks

[@RotheliRacing]

You‘re welcome. 😊

[@remyche8768]

Thanks! Two clips in the wheels arch, @2:30 to @2:50 I didn't have a clue how to get them off. Thanks!

[@RotheliRacing]

You‘re welcome. 😉

[@sandersassen]

Quality content once more Phil, just what I needed as I'm about to mount a bigger intercooler!

[@adrianfairfield5520]

Perfect timing thanks. I started to remove front bumper for new intercooler and oil cooler today😂

[@RotheliRacing]

Glad i could be of service. 😁

[@gr4ror138]

Quality content! Love seeing how the Yaris gr comes apart and me thinking about attempting stuff lol. Keep up the good work 👍😎

[@RotheliRacing]

Thanks Mate. 😃

[@2.neo.3]

Nice, and your English is great 👌🏾 would love to see you do the horn upgrade you mentioned.

[@RotheliRacing]

Thanks Mate. Will consider that. 😁

[@micsub]

Thanks for the demo Phil. Very helpful. GReat video as usual.

[@Gryphus-R]

Very helpful tutorial! Can it be done without removing the wheels and lifting the car? Just with the included car jack. I got multiple gravel impacts on the intercooler and need to remove the bumper to straighten the fins

[@RotheliRacing]

I think it could be done. But have never tried it and wouldn‘t really recommend it. If you can reach the bolts in the wheel arch, it‘s possible.

[@Mopselvis]

Wieder toll erklärtes Video 👍. Wäre noch sehr interessiert daran, wie man die hintere Stoßstange abnimmt.😁 Weiter so.

[@ggaattzz]

Hi, Thanks very much for this "how to video"! Is it possible to undo the clips, screw, and foglight plug under the wheel arch by just steering away the wheel and without removing it? Many thanks!

[@RotheliRacing]

Should be possible, yes.

[@johnmorrison27]

Another really helpful video, keep up the good work 👍👍

[@RotheliRacing]

Thanks Mate. 😃

[@RodrigoRodrigues-wy6td]

Great video, thanks for the great info, can you confirm that there’s no need to recalibrate the radar just by unplugging the plug to remove the np bumper? I’ve read about it in some forum and can’t confirm it anywhere else. Thanks for the attention.

[@RotheliRacing]

No need for recalibration. 👍

[@steffydog]

Ten mins, classic 👍

[@TheBengt]

great content 🖐

[@RotheliRacing]

Thank you. 😃

[@agache3554]

Great! Very useful and helpful! Thank you so much! 😀👍👍

[@RotheliRacing]

Was a pleasure. 😁

[@HelmutEder]

Wow. That looks really Easy. Thanks for that Video. 👌👍

[@RotheliRacing]

It is. You‘re welcome. 😁

[@kevbird1892]

Excellent, thank you.

[@RotheliRacing]

You‘re very welcome.

[@Yameen1]

Is it possible to install the 3dr bumper onto the 5dr gr yaris?

[@ΑπολλώνιοςΕλλάνιος]

Thanks again for the nice video !

[@RotheliRacing]

😃👍

[@chrisbenard7509]

Hi Guys, another great video! Would you consider a rear bumper removal and install? I've got to change mine, an asshole drove into mine and cracked the top! I got a replacement from Toyota, but I'm not sure how to install it! Cheers!

[@RotheliRacing]

Thanks Mate Haven‘t removed that yet to be honest. 😅 So far no need. 😁 But i‘ll look into it.

[@chrisbenard7509]

@@RotheliRacing thank you!

[@Gryphus-R]

Same! I got mine cracked on exactly thr same spot in the same way. It is very flimsy

[@chrisbenard7509]

@@Gryphus-R Yes very light and flimsy, I might try a heat gun and a repair from underneath. The bumper cover cost $150 (weights about 500grams!) put the paint job would be much more! I'll have a crack at painting it myself one day and look at repairing the old one. I found out how to remove it. Remove the 2 bolts remove rear liners and unclip the corners!

[@housoleum]

danke! Lenkrad demontieren?

[@RotheliRacing]

Gerne. Und das ist meiner Meinung nach etwas was nicht jeder zuhause machen sollte. Und da es auch nicht ganz ungefährlich ist, werde ich dazu eher kein DIY machen.

[@al6al6123]

Thank you for sharing

[@m-powerlux2654]

Hilfreiches Video! Könntet ihr bei Gelegenheit auch mal in nem Video festhalten wie man die vordere Abdeckung des Abschlepphakens am Besten löst bzw entfernt. Kann dazu nix finden im Netz :(

[@RotheliRacing]

Ziehen. 😁 Einfach nur von Hand ziehen. In den Bremskanal greifen und von da ziehen. Dauert 5s dann ist die Abdeckung weg.