toyota sienna 3.3 motor mounts engine mounts on all sides replacement

[@dwaynesauka7342]

I'm impressed. Best video I've ever seen on this repair. Great work with camera and very good instruction. A+

[@JM-AUTO]

I really appreciate it! Thank you for your kind words.

[@tjowensjag]

This is an excellent video. You are a great teacher.

[@JM-AUTO]

thank you

[@gspa072]

Your video is awesome Part 1 & 2. Thank you for the thorough explanation. Keep up the good work with your tutorials.

[@JM-AUTO]

Glad you like them! and thanks for your time on the channel.

[@andrewpauda436]

I was wondering why you take off the hub nuts, was thinking maybe you're going to replace axles at same time. But I got it now, you need that movement when you lift up the engine and need to move it around to align bolts. I would have forgot that. Thanks.

[@JM-AUTO]

yes that was just in case but not really necessary in every case, but I like the axles to provide some flexibily if needed in case if the engine is getting too much pressure when going up so with out the nut it would move to the inside providing more options. thanks for sharing Appreciate it very much.

[@oldpartsnrust]

First, awesome video and content as always! Yeah, I dented my transmission pan trying to do the driver's side control arm loosening the motor mount BEFORE watching this. I wound up replacing the pan and it was easy while I had the motor jacked up... HOWEVER the motor mount got in the way for the other stuff so I made a temp motor mount out of all-thread and nuts to keep the engine elevated while I dropped the pan and filter so I could remove the jack. It worked fine. I am interested in the motor mount double nut, stud removal thing I've read of for when I do the passenger side. Do you have any input, opinion or experience on that? I think if it is 'do-able' as in the mounts all have studs threaded into them rather than molded in or cast, it might save time and potential stress for both the mechanic and the components! :)

[@forestskylove]

Wow!!! Super great job... very quality👍

[@JM-AUTO]

thank you, I appreciate it.

[@DoesItWorkByJay]

Thanks for the video man, I can't find part 2

[@JM-AUTO]

thanks for visiting my channel, here is the link for part 2: kzbin.info/www/bejne/pn3cp4V9f9hseZI

[@davidh6214]

I like the safety procedure with the grinder brother, You're smart. And also I like video. Thanks!

[@JM-AUTO]

thanks for visiting my channel that is very appreciate it.

[@whocared..1128]

Yeah, it does help out and get a better idea how to do. Thx

[@JM-AUTO]

thank you your comment is very appreciated.

[@felipebaez3512]

Great video my brother, thank you

[@JM-AUTO]

thank you for visiting my channel.

[@Defined4hispurpose]

HOW LONG DID IT TAKE TO DO THE ENTIRE JOB? im asking to see how much labor would cost me

[@JM-AUTO]

about 3 hours, it will depend on the experience but it be more than that.

[@darkz5973]

i have this problem where the bolts from the bottom of the engine mount spins freely and doesn’t not allow me to take the nut off, any suggestions please?🙏🏽

[@JM-AUTO]

it happend to me a few years ago on the passenger side and cut the motor mount by the top of the subframe around each stud with a sawzall, or you can try a die grinder, that was a very bad experience, I did not make videos at tha time yet. try that may be that helps.

[@artemkherson4602]

What was the reason to change motor mounts? Just because of usage term?

[@JM-AUTO]

they were not good, engine was playing too much, the engine was moving foward when the Driver hit the brake padal, and they were never changed during the entire life of the sienna. thanks for your comment I really appreciated.

[@Brandon-ji2lo]

At 24 seconds he says why lol i love this, good video

[@JM-AUTO]

@@Brandon-ji2lo thanks for your comment.

[@felipebaez3512]

I can feel my engine jump when i go over speed bumps and it slides to the side when cornering.

[@IveyleaguemmaTV]

Super helpful. Thanks for posting

[@JM-AUTO]

Glad it was helpful! thank you so much.

[@davidcourtney7240]

Excellent instruction!! 🤩

[@JM-AUTO]

thank you very much.

[@MyVids2Share]

Are you local here in Southern California? Thank you.

[@JM-AUTO]

hi and thanks for the interest, no unfortunately im in CA, I apprecite it very much.

[@jamesnogames]

What brand of motor mounts did you use? OEM , Anchor, or another brand? Where did you buy them?

[@JM-AUTO]

9565 9591 9212 9694 9165 this is the part number for the entire group of 5 motor mounts on ebay, and thanks for visiting my channel.

[@prtbone78]

​@JMAutoRepairnum1 are these good mounts? Also the last one is for a 2.5 carry will it hold the torque of a 3.3?

[@krazyion5374]

What brands of motor mount you use

[@JM-AUTO]

The Owner bought the partsn I did not get to see the brand or part number Im sorry sor the inconvenience.

[@rogerdarbhan5505]

i love the video. where is the part 2?

[@JM-AUTO]

hi Roger and thanks for visiting my channel, I see you already found part 2 and sorry for the delay but usually I work late most of the time, thanks for visiting my channel.

[@bornoflove]

Are the mounts same for FWD?

[@JM-AUTO]

very similar but the same, thanks for visiting this channel.

[@bornoflove]

Was that a AWD Sienna?

[@JM-AUTO]

yes AWD.

[@abyssalsoul6216]

I just changed all three lower mounts on my 06 Sienna. There is no need to remove the axles nuts as shown in this video.

[@JM-AUTO]

may be my memory and my eyes are not good because I cant see and I cant remember at what time I removed the axles.

[@abyssalsoul6216]

@@JM-AUTO Correction. I edited my response. I meant the axle nuts at 3:33 in the video. Thinking about it though it would help a bit, nevertheless I was able to change the mounts without undoing the axle nuts and I hope I did not strain anything.

[@TwentyTwoThirtyThree]

@@abyssalsoul6216any issues from doing it your way? I’m about to do mine, it don’t really want to undo the axle nuts

[@abyssalsoul6216]

@@TwentyTwoThirtyThree I had no issues at all. Undo the negative battery cable . Slowly raise the vehicle and only to the extent to remove the mount.After the job is done recheck all hoses for attachment

[@EdwininfanteLeocadio]

Primo, como va todo. Te había escrito antes pero me dijiste que estabas de vacaciones ect. Me imagino que ya has regresado. Tengo una Sienna del. 2012 y me suena unos ruidos bien fuertes cuando la prendo cuando está fría. No creo que sea normal y me gustaría que me le dieras un vistazo porfa. Yo voy donde ti. Yo no estoy lejos. Estoy en el Bronx. Por favor déjame saber si puedes mirar a ver cual es el problema que tengo.

[@JM-AUTO]

ola Primo como le ba y gracias por contactar me otra vez, pues si aver cuando puede traer me la sienna, lo unico es que tendria q dejarme la y nose si pueda usted con eso por que yo siempre paso muy ocupado y no puedo areglar un vehiculo d inmediato sino asta 1 o 2 dias despues pero claro q puedo gracias cuide se.

[@EdwininfanteLeocadio]

@@JM-AUTO OK eso se puede planear, como te puedo contactar directo que no sea por acá?

[@JM-AUTO]

@@EdwininfanteLeocadio claro q si, si gusta puedes mandar me tu num de telefono por que youtube ya no tiene la opcion d mensage privado como lo tenia antes, q tengas una bonita noche tu y tu Familia.

[@EdwininfanteLeocadio]

@@JM-AUTO no tienes redes sociales? Y te lo mando en privado por ahí. No quiero poner mi número aquí para que todo el mundo lo vea.

[@JM-AUTO]

@@EdwininfanteLeocadio ola Edwin tienes mucha razon, pues yo tengo facebook pero nose como se aria por que casi no lo uso debido a que no tengo mucho tiempo pero tu me dices y ahy le bamos cuidate saludos a tyi y tu familia.

[@seanprice7339]

Good video

[@leyvasgarage2681]

Muy bien explicado amigo

[@JM-AUTO]

gracias por su bonito comentario y tambien por visitar mi canal.

[@elypeachy3296]

Where r u located?

[@JM-AUTO]

im in the State of New York

[@cgmf-d6t]

Can barely see the rear engine mount stuff. The camera is obscured by the stabilizer bar.

[@marcuswright6543]

ken see pretty much what u need to see if your mechanically inclined

[@tavitochapin]

Nothing help and I don’t believe you 😂

[@JM-AUTO]

that is ok.