Toyota tundra Exterior modification

This is my 2008 tundra double cab.
A d some exterior modification

[@69mysancho]

Tundra looks great. I like the red and black.

[@fifibibi100]

great!!! keep building all the parts of your car. i think its gonna be really good.

[@kaldyn55]

I sold the car already, but ill still explain how i did it. I Ran dryer hose between fender liner and fender , basically hose sat on top of a fender liner , Hard part about installing that hose was no bending hose a lot due to tight space there and fender liner I bend my hose a bit to fit. so using smaller hose might better ideal, I used regular size so it was a bit too big.Once you ran that hose all the way up to the top of your intake hole (where air comes in from fender from outside, there is a plastic part that comes out attach you dryer hose to it, by doing it so will lead cold air into intake box your all done. I did not modify anything inside air box at all just K& N filter and ran dryer hose to get better air flow. from out side while car was driving and air was forced into air duck in front. For the the part where you see in front ( rubber part) that is pipe connector from home depot and some clamps Hope this helps, if you any other questions let me know but, and sorry for slow reply., Yes i had 6 seats in my truck, its hard to find those with 4x4 and 6 seats in FL

[@funguy7979]

Show me more video of the interior of your tundra. I noticed that in the front seat, there's no center console coming back from the dash and splitting the seats. You have "bench-style" front seats which I love. I didn't know that 2nd Gen Tundras came with that.

[@funguy7979]

These second Gen tundra exhaust systems are the most restrictive I have ever seen from any vehicle out of the factory. Just cut out and replace with straight pipe the resonators and I would toss the big suitcase while you're at it and keep the cats.

[@funguy7979]

make another video just for the intake you made. Open the filter box and show how you did it. Otherwise it's simply not worth mentioning if you're not gonna show it.

[@italiandude321]

first you either need to turn ur headlights down or better yet do a projector retrofit because u are blinding the shit out of people with ur hids. tundras lights are set super high from the factory, second u should really dump that exhaust rather than have it dump on your rear end. it could potentially heat it up.

[@funguy7979]

Check out my videos and see what I did to my 1st Gen Tundra exhaust. It was dirt cheap and made all the difference. I got more power, hell of a lot better sound, and I even noticed a slight improvement on my MPGs thanks to me Ecometer.