The A&A kit is by far the best mod I ever did to any car I’ve ever owned. I watched a lot of videos on it before I purchased but I found yours to be most credible. You pushed me over the edge and I cant thank you enough. However, I DO have one regret…I just wish I did it sooner!!!😂😂😂
@Toys4Life10 ай бұрын
I'm in the same boat sir (:-). Wish I would have done it a few years earlier!
@theassetStu10 ай бұрын
I'm 58 and a Chevy guy, I've never had a Corvette so last week I bought a an 03 ZO6 from the original owner with 59,000 miles it's an awesome car as you know I'm here to learn so I don't trip over myself. Thanks for sharing.
@Toys4Life10 ай бұрын
Nice - enjoy the heck out of it this summer!!
@nikkoalpha210 ай бұрын
Thank you for another excellent video. I recently purchased a 2002 Corvette from the original owner with 20k miles. Black on black targa model. Then I purchased a 1996 Corvette with 26k miles from the second owner who had it for 19 years. Love both since I use them for public highway cruising. Your C5 videos are the best on YT.
@Toys4Life10 ай бұрын
I appreciate that!!
@VettesGalore10 ай бұрын
Wow! what a list, really good stuff my friend, nothing like a C5!!!!!!!
@Glide199210 ай бұрын
I really like the Conti Extremes. They have a ton of lateral grip that I trust on cloverleaf on and off ramps.
@darrylsjodin718410 ай бұрын
Same tires on my 03Z, really grip!
@turkinator10147 ай бұрын
I have MT Street Comps on my 03Z. Haven’t taken serious corners with them yet, but pretty solid street tire from what I’ve put them through thus far. Just need a brace for some of the hop and I’m golden. Eventually I will go with some pilot sports.
@GregorioLonewolf7 ай бұрын
About your Exhaust Mod @ 6:40 in the video where you do the exhaust by pass mod. Adding a piece of pipe between the 2 pipes in the muffler area. Although I'd prefer to go with removing the H pipe, replacing with an X pipe, would you still recommend doing this on the 2003 Z06 with the titanium exhaust? Buying a new aftermarket cat back is not in my budget. I like how my car sounds now but a bit louder would bring a bigger smile. I will sometimes drive without the radio on just to hear the car as I drive. Thank.
@Toys4Life7 ай бұрын
To my ears the C5 Z exhaust is a little louder than the stock C5. That said, the titanium does add complexity and cost. First thing to find out is if you have someone in your area that has the proper tig setup to weld titanium and how much it would cost. Depending on where you live - this could be a challenge...
@WarriorsPhoto10 ай бұрын
I enjoyed listening to your list. I would be interested in those exhaust mods. I am going to assume I could ask any muffler shop to perform these mods?
@Toys4Life7 ай бұрын
Probably not just ANY. Find one where the guy has been doing it a long time and is good and efficient.
@Mykytys10 ай бұрын
As for the reliability of the A&A Vortech package, my C5 supercharger package (V3 S-trim) has been around for over 12 years, about 50,000 miles on the supercharger, and works perfectly. Changed the oil every driving season and quite often. engine 8 years ago Lingenfelter built LS2 stroke with 4 inch stroke and forged pistons. boost pressure 0.9 Bar. rear tire 750hp. manual standard box. works perfectly. the differential is a support that I bought based on the tip in your video.
@daren972110 ай бұрын
That's awsome! I got a ecs kit 650whp 02 z06 , I think 750whp is perfect!
@Mykytys10 ай бұрын
@@daren9721 Best standing mile (2015) 203mph.
@daren972110 ай бұрын
@@Mykytys wow awsome 👌
@cmn654015 ай бұрын
Nice vid on your opinion on the mods. I am curious how your fuel economy is after the supercharger?
@Toys4Life5 ай бұрын
Minimal difference - on the freeway. Lots more fuel when in boost (wot, or close to it) as HP takes fuel to make. WAY more fuel efficient than heads cam imo.
@cmn654015 ай бұрын
@@Toys4Life Those HPs really love that Dino Juice! would you say you still get high 20's low 30's on the Highway mpg?
@Toys4Life5 ай бұрын
Maybe one half of a mile per gallon less than stock. So yes definitely probably upper 20s.
@mikeyesfan175010 ай бұрын
Thanks for making this simple. Great car!
@Toys4Life7 ай бұрын
My pleasure!
@flatlandermusic590710 ай бұрын
anything to say about rims? I've been looking at getting a certain kind, but apparently corvette rims have an uncommon lug nut pattern, and are sometimes hard to find. especially with the standard staggered setup.
@Toys4Life10 ай бұрын
Sorry, Not really, I kept the five stars polished aluminum for three reasons. One I like them. Two, they're easy to clean with not having 5,000 service areas and different crevices. Three the finish is pretty durable.
@SLVRFOX8810 ай бұрын
Last C5 I drove had a Z06 titanium exhaust sounded good to me
@nickycarts10 ай бұрын
Great video.
@Toys4Life10 ай бұрын
Glad you enjoyed it
@travr610 ай бұрын
Looking to buy another. Interested in your take here
@Toys4Life10 ай бұрын
What year do you have now? Auto- Manual? Mods? You could build quieter civilized daily and a nasty louder weekend only less compromises car? Or another gen corvette to mix it up more?
@travr610 ай бұрын
@Toys4Life Don't have one now. I had a 2001 C5 black. Looking to buy another. Currently have a Mercedes AMG but looking to sell it and get another vette. Looking for at the C6 or C7 though. I hate the pop up headlights. I absolutely despise them. But if i found a C5 cheap enough....
@travr610 ай бұрын
@@Toys4Life It will be a toy. I want something i can make rowdy. I would rather build on an LS platform instead of the AMG.
@billyquinn216210 ай бұрын
Have you ever considered any tuning for dummies videos? I recently purchased an HP tuners device and have found it to be a little intimidating.
@Toys4Life10 ай бұрын
I've done a few tuning videos, check them out of my channel. Otherwise goat rope garage has quite a bit of stuff or you could pop for a Tuning School or Evan's performance academy package.
@exoticspeedefy791610 ай бұрын
I am turning my base 00 C5 into a Z06. Currently I have painted callipers red, fog light delete with Z06 mesh grille install, Z06 side rear brake cooling ducts installed, and LS6 intake/headers with stage 3 cam and long tubes. The only thing missing is the T56 Manuel :( but I do have a 3:15 Differential. Also removed the F54 electronic suspension rubbish and components, installed coil overs and going to put Z06 sway bars