Unbelievable value! 100% Chinese ELECTRONIC bike build

[@xnoideawhatimdoinx]

Congrats on the play button! 🥖🥖🥖

[@1sigma]

Grant mentioned in an update that it was a jiggly battery that was the issue. Apparently earlier versions of the battery tube used a leaf spring to hold the battery in place. It has since been replaced with a conventional spring. The fix for Grant was simply bending the leaf a bit to increase te, apparently

[@TraceVelo]

OK awesome, thanks for the update!!! In that case, we can pretty much put that issue to bed!

[@1sigma]

@@TraceVelo just watching your update! Not a good start.

[@roberwt1234]

Congrats on the 100k, well deserved! Awesome in-depth look at the groupset and the new bike, exciting stuff! However, it seems unfair to compare the price of 105 Di2 to ERX when you don't disclose the cost of the drivetrain components of the Ltwoo groupset in the same shot, which is included with the Shimano group. Edit: I've also just noticed that there is a big difference in pricing if you buy the Ltwoo components when you're located in the Netherlands (±830 euro) or in the UK (±625 euro). For comparison, a complete 105 Di2 groupset can be bought for about 1025 euros over here. 😅

[@TraceVelo]

Yeah this is fair. I tried to find a comparision for 105 Di2 where it is sold with only the shifters, derailieurs, and brake calipers, but there isn't an equivalent unfortunately. If you can stretch to 105 Di2, or find a good deal on it, I would probably reccomend that over the L-TWOO... Unless you want to stick with your 11 speed components, then L-TWOO def has the upper hand....

[@stevewilliams5428]

@@TraceVelo You could do a cost comparison between an Ltwoo plus 105 components to make it a groupset... against buying a 105 groupset complete. I doubt there would be much difference. Even if the Ltwoo/105 combination was say £200 cheaper I'd still go complete 105 for compatibility, quality, spares, warranty and peace of mind. I'd be difficult to convince otherwise.

[@helicart]

Luke, I watch a lot of youtube vids on cycling and other stuff, and I have to say you consistently are a stand out for quality content, editing, and pepperign humor. Your vids are very watchable, and compelling. I have bought several products based on your vids (pedals and saddle), and am motivated to go a similar route with my next roadie as this bike. Thanks again for the massive time investment in these vids. You would no doubt be successful at whatever you apply yourself to. Brisbane Australia

[@anders6383]

Luke I really like your videos and agree that the group set is good value. Though it isn’t accurate to compare the price of ERX to 105 di2 without adding the cost of the cranks, cassette, and rotors to ERX as those are included with the price shown for 105 di2. Aside from that little thing great video as usual mate.

[@TraceVelo]

Yeah this is fair. I tried to find a comparision for 105 Di2 where it is sold with only the shifters, derailieurs, and brake calipers, but there isn't an equivalent unfortunately. However if you bought the 105 Di2 stuff separately, or lumped in my chosen crankset, rotors, chain, and cassette with the eRX groupo, i still think it would come out much cheaper...

[@johannklose9809]

please never waste money on licenced music again! your improvised montage music is a delight! 13:16 🥖🥖🥖

[@GrinningDemon]

Congrats on the milsetone, and thanks as always for the fun and exciting content. One note on this build, I had the 11-SPD version of that Racework cassette and loved it at first (super light and shifted reasonably well), but it wore out in under 2,000 miles.

[@TraceVelo]

Yeah the aluminium chainrings on the Racework crank are pretty soft, and they are quite thin to save weight. I will say that you can quite easily swap out the chainrings for a new one. Senicx do a good one for about £40 if i recall....

[@malcontent_1]

Congratulations, Luke. The plaque is cool and all, but the hand painting by your mother-in-law is the real prize. 👍

[@TraceVelo]

You got that right 😁

[@grantbeerling4396]

"Yep, I've said it before and I'll say it again. Life moves pretty fast. If you don't stop and look around once in a while, you could miss it." - Ferris Bueller 1986 Chinses equipment has gone from 'chancers crap' to 'challenger kit' in no time.

[@DG-tf9rp]

Only thing I would change, is moving the bike from your collection to mine. Great job.🥖🥖🥖

[@daevion5585]

alas, time to entertain myself with a new Bike Build Video! Also Congrats on the play button Luke! Oui Oui 🥖🥖🥖

[@joneinarmattiasvisser6113]

Might L-twoo become the next big groupset manufacturer? Looks absolutely amazing for the price!

[@nochancecw]

That is bananas. Super stoked to see this stuff come out. I hope it starts disrupting major brands and kicking their groupset prices lower. Electronic groupseta for the masses is so fun! I also wish the rear derailleur was 8/9 speed compatable so you could run Frankenstein some old stuff.

[@ZizBauer]

BIG congrats on 100k subs Luke! So well deserved and keep up the amazing work 🙏🥖

[@TraceVelo]

MY MAN!!!!!!! 😘

[@qwertyazerty2137]

One tip guys - in one of Luke's build he put some fiber grip paste inside the steerer tube for the expander plug to hold better. I tried it and I strongly advise not to put it. The paste is greasy and the addidtion of fiber glass particles does not help. Even if I tighten the expander bolt to maximum, it still slips upwards when tightening the stem cap which makes preloading the headset bearings impossible. Without the paste there is no problem.

[@engnelsito]

Grip paste makes sense between two carbon fiber surfaces, such as between a carbon seat post and the seat tube, as the particles can indent in the resin on both surfaces and prevent it from slipping. I don't think it has much benefits in a carbon to hard metal interface, such as an expander plug and steerer tube, apart from what you say: it actually makes it greasy and even more likely to slip.

[@phearnden]

Your smashing it Luke, I really enjoy your videos. Have some baguettes 🥖🥖🥖

[@joegamas1194]

Let’s begin by saying what an accomplishment and achievement….Big Big Congratulations Luke 🎉🎊👏 Well Deserved and You Worked Your Butt For It…Ones Again Congratulations on Well Done Job and This Are For You 🥖🥖🥖🥖🥖🥖🥖

[@mclarenf1V12]

🥖🥖🥖Exceptional back-to-front build. Congrats on Silver YouTubing!!!

[@chillstep4life]

Amazing value for money. Your video inspired me to get L-TWOO eRX. It is amzing just as good as the Shimano 105. But even better because the App is very functional and easy to use.

[@flo2471]

It would be really cool to see you do a series for all of the different parts, where you do periodic reviews. Like it would be interesting to get your opinion of the groupset after 1000 miles, 2000 miles, 3000 miles etc. Even if it's always the same and keeps working fine, it would give people a better idea how these chinese parts hold up over time. I haven't seen anyone else do that yet and you're the perfect person to do it, as our resident AliExpress expert 😄

[@tobiasbrewin4355]

Agreed, even just a quick YT short to document how the parts perform over time and wear ect

[@orrinkelso9295]

100,000! Well deserved. You are entertaining and have a unique style. Can you inquiry with Ltwoo about whether they plan to offer a cable caliper brake option? For those of use that want to upgrade our older bikes.

[@justineseiferth8010]

This. Really hoping they release a rim brake version!!!

[@PassionCyclingRunning]

105 di2 does not cost double since in Ltwoo Erx there is no cassette, chain, brake discs and double chainring. In the end 105 di2 is better and much more reliable I think.

[@echtogammut]

Congrats on your silver plaque.

[@christianhall3034]

This bike does look very nice. Is there a weight difference between the IIIPro calipers and the ZRace ones on the road bike? They look the same to me 🤷‍♂️

[@truktronton88]

congrats on 100k subs luke! the gift from your mother in law is really cute too!

[@larisonjohnson]

CONGRATULATIONS!!!! Well deserved! You create outstanding content. 🥖🥖 🥖🥖 The build is awesome, quality looks great, love the features at that price. Put it on a quick diet and start logging the miles. Will you be riding it for a while?

[@lpoolck17]

Definitely considering this groupset. Will make my final decision based on your longer term review. Hopefully they bring back the auto trim feature for the front derailleur (very small downfall). Does it talk to Garmin headsets? Congratulations on the 100k 🥖🥖🥖

[@rascal1234]

Congrats on reaching 100k subs!. Next goal 1 million. Maybe if you toss the bike in the ocean and see if the group set still functions. I am really impressed on the price for the relative performance of the trifold build. I can’t make up my mind if I should splurge for the Yeoleo, iCann or Trifox. I do have the MFM100 and love it, so I am leaning toward trifox.

[@lucperon9600]

Thumbs up here if Luke should grow a dirty duster of a stache.

[@Andresapal]

Nice bike laboratory, Luke questions, how do you recharge the battery?, it has to be out of the sitpost (hard)? the saddle has to take out always? how long takes to 100? how many rides you can do?, sorry for many doubts... I used to see the batteries on the derailleurs and remove it with a click...thanks and congrats for the 100K

[@Tntdruid]

You should never cut carbon whit out water on it, the dust is very bad for your lungs.

[@bama95]

I love this channel. Baguette duties for the algo 🥖🥖🥖

[@demonstructie]

Damn £2233 without taxes would be €3184 including taxes for me. That kind of money buys you a brand new 2024 Giant TCR Advanced 1 with 105 Di2 from the LBS! Better bike, better components, it comes fully built and ready to ride, *you've got a warranty,* and the convenience of a brick and mortar shop - I know which one I'd choose! Nothing against you or the video Luke, I'm not trying to be negative but I just don't really see the point of a "cheap" bike where every part is a liability, that is actually the same price as one of the very top road bikes from a reputable brand with full service and support!

[@Vishal-nu5jq]

17:47 I think you forgot to mention that these do not come with crank, cassette, chain, rotors etc

[@jonburnell532]

Well done on your 100k. Next stop, gold! 🥖🥖🥖

[@pin0teres]

8:15 I had a similar problem with Ridley Kanzo Fast. The difference is this bottom spacer floating over frame has no contact with the frame, but even then a piece of dirt (it is a gravel after all) could get between frame and spacer and scrape the paint off.

[@ryanmichael11]

Delighted for you Luke!! ▶️🥖🥖🥖

[@ssj4david]

Many congrats Luke! You're doing saviours work for the bike community!

[@alordy84]

Do you have any insights on whether ltwoo might release a rim brake version of the electronic groupset? Would be a great update for one of my older frames! 🥖

[@grantnyenes3742]

Firstly Luke, huge congratulations on reaching 100k, I remember you with about 20k… really good looking bike, and really glad to see them sticking it to the big 3 group set manufacturers, who have been rinsing us for years…really impressive bike, and great that it can instantly handle 11 speed…🥖🥖🥖🥖

[@TraceVelo]

Thanks grant, really appreicate it!!! Yeah I can remeber 20k too, back when I was working 2 jobs, never in a million years did I think id be here right now...

[@aveedub7403]

Wey hey Mr.100 thousand!!!!!🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🍾🍾🍾🍾🍾🍾🍾

[@jpnokom1204]

Congrats Luke! Been a long time watcher 🥖🥖🥖

[@WashichawbachaW]

Luke, I suggest you replace the integrated handlebar and stem with Taiwan's Avian Canary integrated handlebar and stem. It weighs only less than 300g for around $180.

[@steveindorset]

Hi Luke Big congratulations on the 100k subs. I kind of had the feeling from the start you’d do well. Great review. I think L-Twoo and Tri-Fox will be selling a LOT of product because of this vid. Especially the L-Twoo, very impressive. Watch out Shimano & Sram!! Liking the mother-in-laws painting & love your Nan’s singing. You went to the English seaside? You’re now a mega KZbinr I thought you’d be at St-Tropez or Monaco not peeing down Bridlington. 😂 Dude you really need to paint that there garage! Awesome as always.🥖🥖🥖😁😎👍🏻

[@jerome-f7z]

Kmc is from taiwan? i dont think its a 'western' brand

[@IFrancyISantosI]

I just can't motivate myself to build a fully internal routed bike. Just the extra steps for the headtube doesn't seem to be worth the struggle

[@TraceVelo]

It was honestly MUCH easier than i thought it would be... The one issue i can see, is that maintenance moving forward will be a masssive pain. For example if i want to remove, or add a headset spacer... gotta pull apart the entire headset

[@yukkionna1747]

Congrats for the award Luke 🥖🥖 hoping for more quality videos like this. 🥖🥖🥖

[@johnnyboy4711]

She's a beaut,well wear Luke 🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖

[@ilikewasabe]

Grats Luke! Well deserved and more! Im sure you’ll reach a Mil in no time!

[@stephenlinton1236]

Excellent work. Thanks for taking the time to put together this stellar content.

[@huggcycles1545]

If I were in the market for a new bike, in the words of Mandalorian "This is the way" 🥖

[@TraceVelo]

*_Nods in Mandalorian_*

[@iTzRafaaaa]

really happy to finally see this video out! Probably my favorite build so far (actually inspired me to also go for a X18 x eRX build). Keep up the great work!

[@TraceVelo]

Amazing, good luck with the build, let me know how it goes!!!

[@iTzRafaaaa]

thanks, I will do so! Probably still waiting for black friday sale to buy the eRX Set. Gotta wait some time for wheels and frame delivery anyways.

[@jkspcoy]

How did the build go

[@iTzRafaaaa]

@@jkspcoy I'm very happy with it. Finished the bike early this year and rode about 3500 km (about 2100 miles) so far. The rear derailleur died 2500 km in, but ltwoo replaced it with a new blue version part. Was a known issue, the gearbox just broke down. Apart from that no complains about the eRX group or the frame.

[@jkspcoy]

Yea built one up myself, really no complaints about it so far 😁 from watching lukes videos he reallt put it through its pasess so hopefully mine will last 🙏 ​@@iTzRafaaaa

[@cyclingjunkie87]

🥖🥖🥖🥖🥖🥖🥖Always loved these videos and have been following you for a while. You inspired me to run a 2x10 ltwoo on my CX bike and it ran beautifully. Thanks so much for this content and opening my eyes to a cheaper price point for bike parts. My wife loves me much more because of this lol.🥖 🥖 🥖 🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖

[@valmorell]

🥖🥖🥖🥖 Pro tip Luke: when you attach the brake hoses, try this: fit the olive into the lever, then gently screw in the hose nut. You should now be able to slip on the hose and tighten with no fear of cross threading. Yes, I most certainly would buy this bike. Lovely set up.... Thanks.

[@santibergallo]

It's been months since I've been wanting to build something like this as a crit bike!! 🥖🥖🥖

[@ThunderStruckMTB]

I just love this! The performance / cost = value equation is off the charts and the fact that the riders who dished out more than $12k for a bicycle will scoff while sipping on their $12 coffee at the local trendy café makes it even a better value.... as a MTBer, I got a chuckle out of the "Racework" crankset that uses Raceface's exact font!

[@TraceVelo]

Yeah the value is pretty crazy on this one! It's mainly to do with the enormous premium that brands put onto any bikes with electronic groupsets. However in fairness, i will say that if you buy a Specialized, their warranties are pretty extensive... This one, not so much 🤣

[@yazidyusop]

🐶🐶🐶 Thanks for the build.. Love ur humor inserts

[@dcv9460]

🥖🥖🥖🥖🥖🥖🥖Congratulations again for the YT SILVER 💯 AWESOME BUILD! 🥖🥖🥖🥖🥖🥖

[@WayneLockyer]

Hi Luke, i commented in your short vid some weeks ago, i bought this frame at the start of the year and found a few faults one quite alarming. Delamination on the seat tube which made the frame scrap with no joy when complaining to Trifox. Caliper mounts needed alot of sanding to get them square and one other problem which puzzled me was when fitting the rear wheel the dishing was out by quite alot, i tried a number of different wheelsets from my other road bikes but they were all the same. This would mean i'd have to have a rear wheel redished and could only be used on the one bike. Love to hear your feed back on these issues. BTW the frame is only usable on the indoor trainer now.

[@travispyle2905]

Does your frame have flex in the bottom bracket and corner porely? Mine does. I also had a number of "difficulties in the build". Curious if Luke got a "ringer". He should pay a buddy to buy one and then inspect it to see if the quality control is consistent.

[@WayneLockyer]

Only managed to ride it once on the road as the delaminated seat tube was condemed by carbon expert after inspection. Build was ok, the frame was sized right but had alot of toe overlap on the front wheel which on my other bikes of same size was not an issue. the frame i think is asymetric so the rim of the wheel sat more to the off side of the the bike, i do remember on the 1 ride i did when braking the wheel pulled sharply to the off set side. Shame i didnt get the same aftercare that You Tubers get as im over !500 pounds out of pocket!!!@@travispyle2905

[@xVertOx]

@@travispyle2905I also had a few massive issues with the frame. After about 5000km of riding I can fill a loss of stiffness in the bb area. I am sure it was way stiffer when the frame had no mileage but after a year of riding it seems that the frame has worn out.

[@paulmorrison30]

Excellent work as always and congratulations on your achievements thus far 👏🏾Long may it continue 🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖

[@onegrapefruitlover]

Lmao the diy background music was a good bit 🥖🥖🥖🥖 The build looks amazing and really good value. I’d like to see more gravel frames from these budget Chinese manufacturers.

[@MatzeKel]

Congratulations for the 100.000 Users - I am one of them...

[@onewheeldrive]

First off, 🥖🥖🥖🥖🥖! Second, you mentioned an adapters that let the seatpost handle taller rails (I think), where would one find that? I've Specialized seatpost that won't fit the Zeius 3D Printed Carbon Seat.

[@breathestrongcycling3672]

WOOHOO!....I've only need another 99843 subscribers and I can have one as well! 😆👍...fair play, you've put the work in so at least you get something.

[@michaelbonnen9791]

Congrats!!!! I’m glad I’ve been a part of this channel to help with my likes and subscription for you. Thanks for great videos.

[@stephenwagner2084]

The royalty free music montage music was by far the best royalty free music for a montage I have ever heard on my many years of youtube watching. 100% unique, very catchy. 🥖🥖

[@simonalexandercritchley439]

Congrats on the 100K subs Luke.The play button means you can play and ride even more! Trifox must have upped their game as previous frames have had issues. I will be watching to see how L-twoo lasts over time.🎸🎺🎷🎹🎻🎼🎶🎵🎤👍

[@kulasisi08]

Be careful with these Chinese copies. IMO it's not worth the risk. what if it shatters on a fast descent. I am willing to pay more if I can get back home in one piece. Famous brands spend a lot of money on R&D that's why their products cost more. Each to their own. This is just my opinion. You can agree to disagree.

[@philballphotography]

congrats on the subs. Your energy is a big part of why I watch, keep it up!

[@becyk_du_quebec]

Totally deserve all those subscribes, your content is of great quality and the videos are always enjoyable to watch, no matter how long they are, congrats!

[@KobraStarship11]

Great review as always. Literally had my er9 groupset show up in the mail today. Seems really quality from first inspection. Working with elves to build up a custom elves falath pro in the coming months. Going the china direct route seems like a no brainer these days compared to the cost of western brands

[@TraceVelo]

NOICE!!! Yeah sounds like a great build! Word of advice, when bleeding the brakes, make sure the small free-stroke adjustment grub screw on the front of the shifters is screwed out all the way. If you screw it in at all, it can prevent you from bleeding them properly.

[@marklobusta3986]

Congratulations on 100k subs been here since the first china carbon frame , the magnesium pedals sensah groupsets 🎉🎉 more subs to come😊

[@neutronpcxt372]

Since you have a VG Sports 12spd chain coming, do you think you could strip down the factory grease(if there's any) and use a high end lubricant like Silca Synergetic to see if the lack of proper factory grease is what actually killed the chain.

[@LawrenceSeetoh]

COngrats on the 100,000 subs and taht looks like an amazing build. 🥖🥖🥖🥖🥖🥖🥖🥖🥖 for the 🥖 King

[@merckxy54]

Great video Luke. Love to hear what you think of it after two or three months! And congrats on the 100,000 subscribers, well done!

[@Flashback_Jack]

Cool, a bike named after one of my favourite Atari games. The thing is, the ship in the game only turned at 90-degree angles so..

[@jmedina_r]

Hi there! Which rubber grommets did you used to cover all of the Holes for the mechanical shifting and bottom bracket? Regards!!

[@mr.malibu7542]

great video and congrats on 100k. Just a comment regarding the erx groupset: i believe the best competitor for the erx would be the sram rival etap axs groupset, which in germany costs just about 200€ more than the erx. i personally believe the sram battery system is superior over the shimano di2/ltwoo erx.

[@TraceVelo]

Ok fair enough, plus that SRAM warrantly is hard to argue with...

[@iTzRafaaaa]

in terms of weight the eRX with ~1320g (Shifters, FD, RD, Brakes including hydraulic cables) is way more competitive than the rival etap axs with 1393g (only Shifters, FD and RD without brakes, which easily add another 350g+) The force etap axs set is available in Germany for 824€ right now (Shifters, RD, FD, Brakes and even Rotors included), which is actually a nice alternative since it comes with a significant weight saving compared to the rival set and weighs pretty much exaclty as much as the eRX set.

[@dbvegan2840]

🥖🥖🥖Loved it mate, these Japanese brands must be getting worried, how can they justify these prices? 🥖🥖🥖Congrats on the 100k subscribers, long overdue 🥖🥖🥖

[@markfarrar8460]

Does L-Twoo have a gravel 1x electronic groupset? Or is it a case of buy the 2x and don't use the front mech? Could it be used with a wireless dropper maybe? Congrats on the 100K 🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖

[@DigitalDimi]

Awesome video! Very useful, no BS, straight to the point.

[@ironray123]

Wait a minute.......600USD for the frame? Are you kidding? That's insane.

[@becyk_du_quebec]

It'd be nice if ltwoo released a an electronic rim brake "upgrade kit" for those that would like to upgrade their older rim brake bikes to electronic. I'm sure there'd be a nice market for that...

[@justineseiferth8010]

This, their mechanical cable version is great. I wish they'd kept the campy style shift levers from them!

[@markvonwisco7369]

16.434 pounds is a great weight for a build that costs $2800 USD. 🥖🥖🥖🥖🥖

[@thomasalison6188]

Congratulations for your 1st 100,000!!!🥖🥖🥖. Awesome bike build!

[@noburt9]

🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖 Love this content my man Congrats on the 100k, you are honestly my favorite cycling channel. I'd love to see you maybe try a steel bike frame some day, or titanium. I may or may not be asking that out of my own selfish wonder because I've almost had a custom Reynolds 853 frame made for me by Marino bikes. And might do it over the winter, unless I decide to go carbon. Time will tell. 🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖

[@rayw9067]

Congrats on the 100k!! So does this mean with the 10-12sp hearing options you could put this on an 11sp shimano groupset as a bit of an upgrade? Would be good if it were rim brake compatible

[@gustavobertazzoli8729]

Congrats man! For who is following you since 15k subscribers, I just feel amazed for you!!!!!! Well deserved! About one topic on your bike, I would recommend you to use the Emume bar tape. :) About this bike, I would love to ride that. Nowadays I ride a Pardus (Chinese one from Trek factory) and SuperTeam Carbon wheels (also Chinese) and feels perfect, can't complain at all.

[@on3x862]

Great video! So what is tyre clearance with those 28c on 21mm internal width? Thinking of buying same frame from Seraph/Tantan (= X-33) but planning to run it with 28c on 25mm internal width (should end up around ~31mm once inflated). As this frame is retailed as "28c max tyre" I'm a bit concerned. Thanks!

[@OrangeNooob]

interesting build (and finally almost without post-work to be in working state) but my question is GRAVEL BUILD VIDEO WHEN?) (you've posted it will be "soon™" like 2+ weeks ago)

[@sebastianmoise8728]

Looks like you have short memory..."you don t have to deal with internal wires luke Di2"...? really? Batt and internal cables installed are sci fie? 😅...plus think about that our west competent and inteligent creators are struggling to create, build and mass produce a competitor for the SRAM SHIMANO or Campy...we became consumers and sale agents 😢😢😢😅😅

[@dawwwide]

just, THANK YOU! You ALWAYS are easy to understAnd and so passionate about your job! love it! THANKS THANKS THANKS!

[@TheAnimejosh]

congrats man, can't believe you're already at 100k!! when is the ogevkin frame review coming out btw? 🥖🥖🥖🥖🥖

[@brauljo]

18:33 Wow that's just like the Archer D1x shifter. Sram, Shimano, and Campagnolo don't let you adjust each gear individually.

[@frozenbean]

🥖🥖🥖🥖🥖🥖🥖Congrats on 100k! What a sweet build (and an extra baguette for your nan 🥖)

[@gushle]

definitely a "dream build" talking about quality/price value. It looks like this LTWOO is a great value product, "youth" problems that are quickly solving aside. I'm curious to know if this product is having a role in lowering the launch price of 105 Di2, assuming that it's a lot lower than the price 11s 105 mechanical had for a long period of time

[@jkspcoy]

Brilliant to hear I built one up myself and have had really nothing to complain about, from watching Luke's videos he really put it through it's passes😂 so I'm pretty hopeful mine will last a long time 🙏

[@PeterSmithCA]

Very nice looking bike! I kinda want to get the groupset, but honestly here in Canada its over $1000 currently with no crank or cassette. And I can get a used Ultegra DI2 11 speed for about the same (obviously this can depend on the day/etc on local marketplaces). Not sure the value works for me. 🥖 Hows that racework crank been working? I've seen a lot of bad reviews on Chinertown about the insert separating? Makes me wary. 🥖🥖🥖🥖

[@jan-bastianbuck714]

Does anyone know if this is compatible with Sram Rival etap AXS 12speed? Would to have the possibility to chance wheels between my SRAM build and the potentially upcoming L-Twoo build...

[@joaomauriciobasiledesouza6204]

Great work dude! I have one question for you. As an extreme heavy rider, ( I weight 115kg and I’m 1,90m tall) Can I trust this carbon frame? Will it hold up?

[@trelosenario]

That is indeed a great value there ! The Pockets are clapping silently happy ! 🥖🥖🥖 The wife will have no reason now to .....well there can be always a reason as i am thinking of it better..... Thanks again for this awesome/magnificent/exquisite video Luke .