Traction Issues with the Pull Truck, Dropped a Gear and Found WAY More POWER!!

ALL MERCH MUST GO! USE CODE “25off” for 25% off site wide, plus all Blue Collar Shirts are priced down! Visit brucewilsonshop.com
Subscribe to my second channel! @brucewilsontoo4879
Check out Clay’s Website! www.babbindustries.com
Be Sure to check out our supporters!
Fitzgerald Peterbilt for all of your BIG RIG needs! fitzgeraldpeterbilt.com/
Green APU for the best comfort in a big rig! greenapu.com/
Buy Truck Wheels buytruckwheels.com/
Diesel Auto Power for all of your Automotive diesel truck needs! www.dieselautopower.com
Truck Trailer Pro for your Truck and trailer supplies! www.trucktrailerpro.com
Renegade Products for your Vehicle Polishing and Detailing needs! www.renegadeproductsusa.com/
Lifetime Nut Covers!
lifetimenutcovers.com
NEW MERCH!!
brucewilsonshop.com/shop/
Sunglasses I wear!
glnk.io/n86p/bruce-d-wilson
Use code BRUCE10 at checkout!
Jump boxes
jbtools.sjv.io/brucewilson
Use code BRUCE15 for $15 off your next order of $150 or more!!!
Looking for equipment? Check out our website!
buyatractor.com
Follow us here!!
SNAPCHAT- bluecollarbruce
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!
Fan Mail, Send Too
12410 US HWY 301
Dade City, Fl 33525

[@jamiesuejeffery]

I was once at an NHRA race. Honestly, there was a whole lot of absolute nothing between the races on the 1/4 mile. However, that night they had an exhibition car, a jet car. It did not have motor traction to the wheels. It was just a jet hooked to four wheels and a, "pray for me" cage.

[@littlebuddy761]

Gotta look into the NTPA

[@robbiehowell843]

You should put a go pro inside the truck and get some inside the cab pulling footage 🤘🏼

[@natethompson302]

Some lead up front and a water box in back and you are good.... it's just as much about weight distribution as it is horsepower..but all in all great job for your first weekend.

[@Trenton-om9qs]

I love the truck and tractor pulling content. There is nothing like a tractor pull and I've been going to them since I was little. Lots of good ones here in Ohio

[@HuntGamingProductions]

Bg and urbana are the best

[@Trenton-om9qs]

@@HuntGamingProductions I would love to go to them someday. The ones I go to are just at the Fairs in my local area. They still put on a good show though

[@NoPrepFans]

I’m from western Pennsylvania and pulling is big there

[@johnny22single99]

ABSOLUTELY-----> AWESOME!!!!!!!!!!. 🙂

[@austinpfalzgraf3688]

Great last pull of the night. Had a great time and got vid of the truck going down

[@561ENTERPRISE]

Really cool Bruce. One of my peoples was there and seen you rip. Good finish and great close up pics too he shared. 73's.

[@realkilju]

looked so damn cool twisting that frame while doing the pull

[@plyxrs]

i have to say Bruce, that run actually got me pretty pumped up. i'm ready to see you get back out there more, soon.

[@davidmaust1415]

You should get a winch mounted to your trailer for loading pulling truck and future tractor

[@jamesstewart4193]

Love honesty!

[@tomtom2438]

I know nothing of trucks but definitely think it’s a nice looking one!

[@scottfoster9690]

Another good pull bruce and your right at least nothing broke. You will get better every time you pull. Awesome truck!

[@reloaded1880]

Great Great pull Bruce 👍.

[@Mfullen09]

That was really cool! Thanks for sharing.

[@johnbathgate904]

Great job bruce. Watched your videos previously with the diesel drag truck and cleetus, kinda lost interest in channel when you moved into over the road hauling. The tractor store content was a bit on the small hp range of interest for myself being I'm usually running 175-310 hp tractors on a dairy farm. But with that being said your new endeavor into semi pulling has brought my viewership back to your channel. Past weeks content is so every race/pull team when running an untested machine. Definitely need more fuel, sounds very poppy. Hoping you can make a trip up to northeast and catch an event with some pa posse pullers,they all seem to be good Ole boys just having fun. Check out the new school freightliner Cabover with the huge Detroit motor that pulls up in Canada, that thing is a beast. Best of luck on the season.

[@HuntGamingProductions]

“This fella has a gas engine to start Up the jet engines”=Pony motor

[@nickalhasan1180]

Did I just witness 2 jet engines on a fvking tractor!!!??? Now I’ve seen it all lol. The engineering !!! BRAVO! Awesome truck Bruce.

[@thomasmeacham5210]

Nothing makes me happier than seeing all the hard work I’ve watched you all put in that tuck and it making two clean passes as it did. Keep the videos coming buddy💪🏼💪🏼

[@mohshad9700]

Bruce Wilson is the best

[@KPMACHINE1]

As a aviator who grew up on a farm and drives semi’s for a living, I loved this video for many reasons!

[@apuuvah]

All kinds of internal combustion vids are my guilty pleasure. Not exactly ECO stuff. But the sounds and the power. And speed.

[@doughamm5590]

Awesome job guy's. Looks like so much fun. I know it is watching them. Go watch the truck and tractor pulls when they're near me when can afford it. Good luck on getting MORE power

[@FullSendGaming82]

Hey Bruce great run ..... I have an idea have a dash cam in the truck when your going down the track... I'm not sure if you are on boost b4 you leave the line but your second hook was alot better then the first

[@FullSendGaming82]

Oh didn't your truck weigh a little lite anyway .....go look at some other pullin trks to see where you could put weight.... you will get it figured out

[@thelittlemechanicjones7100]

Bruce you should add some weight in the front and give the frame a foot of exstention

[@micahhenry4998]

The way the jet tractor started the jets was cool

[@Seventeen76]

I miss the Tractor pulls at the Astrodome from when I was a kid.

[@FarmerSteveO]

Truck and tractor pulling is definitely a rush and addiction!

[@scottvaughan473]

Truck doesn’t sound like it’s firing on all 6. Easy way to figure out is a temp gun. To the Manifold. Hang you more weight on the Rear ass end of the tractor to make it dig a bit harder. And to get you up to weight. Looking good thou.

[@ThanksHero]

He didnt put the injector harness on correctly with the new injectors a couple videos back lol.

[@scottvaughan473]

@@ThanksHero fast way to buy a bottom end for a CAT

[@ThanksHero]

@@scottvaughan473 Maybe he will notice it making oil before its too late

[@scottvaughan473]

@@ThanksHero Don’t take long. A CAT platinum kit is about 35 grand

[@dennissastini3312]

Be proud Bruce no games just gettin er done and havin fun great video

[@JoshA85]

Bruce next I think it would be cool to have a go pro inside the cab. Great video as always tho.

[@jondivoky9582]

Those are really good poles you did I'm very proud of you

[@4tscattleco03]

Are you not going to give us an update on what you did with the trx?

[@benjaminstockton3917]

Awesome pull Bruce proud of you buddy .Thanks for sharing 👍

[@ProudPapaw88]

Great video, Bruce. Keep’em comin. Thanks for sharing.

[@AJmx2702001]

You got something good there to go with unless you just got to ask yourself how far you want to go with it. Otherwise the first thing I would get rid of is the ECM that's going to be your biggest holdup. Most of them that run I'll have some kind of water injection and big ice box too. Weight wise it look good. Carried it nice. You seem to be able to drive it off the line. Pretty good too. I work with a team that has a super stuck tractor that runs four of those turbochargers like you have on that truck but it's cranking out some RPMs on alki fuel

[@nitemare18]

That truck can run with an ecm they do it everyday if you watched any of this before. With him only running one charger and he doesn't have a lot of fuel he doesn't need the water injection.

[@ericgriffin397]

This is an awesome video!! Thank you!!!

[@brianmeattey2724]

Deff a great vid godbless and stay safe

[@timl6835]

you should have made your lettering chrome in the back.

[@patrickholt8508]

Great pulls this weekend enjoy seeing you pulling again..

[@nigelcraig9641]

thankyou love the lorry and tractor pulling content and how youu take us up close and personal to the machines and explaining how everything works keep this comming love it

[@mikedryman1905]

Acert fuel pump and Acert pressure relief valve will give you more fuel pressure. We changed the relief valve on my 6nz and cranking out a 120 lbs of fuel pressure.

[@timblackmon3581]

Ride that wheelie down the track, pulling truck and the Tratter Taxi looking good. Was the fender on the drive wheels rubbing the tires on that last pull?

[@michaelcarmean4906]

💥 You Can Have All The HP In The World 🌎 But Putting It To The Ground Is The Art💥

[@allanperry6507]

Always wondered Bruce why they don't weight at least one side off the front to limit the amount of twist when pulling ? Smiles 😃 from Canada 🇨🇦

[@Calebmcguckin]

Hell yeah Bruce. I love the content. Your guys are doing a great job, keep it up.

[@Haneyridgehustlers]

Bruce you should put a go pro in the cab with you. Love the videos

[@christramontana3598]

I wouldn't have the patients for one of those jet engine pullers they take forever Todo anything but they are neat the mechanical part of them how they are put together

[@carldillow3500]

Great job Bruce that was a awesome run buddy keep it up u got the hang of it already good luck

[@Cody227Ogden]

Rosick well drilling with Fatal attraction is from my home town Bruce!

[@banditgrizzy1955]

🤔 guessing that's why the solid steal bumper was on front , "weight" to keep that front down a bit more 👌😉

[@cornyharms1472]

Happy to see you doing what you love love the truck tractor pull video let's go 💪✌️

[@dangit4341]

That’s the one bad thing about truck pulls, it takes forever!!

[@jesseplouvier6374]

Nice driving man. That was a great pull for your "first run."

[@DrDiff952]

Art Arfons of the green monster fame had afterburner on his triple jet engine green monster pulling tractor in the ushra

[@robhighfield4699]

Great video, loved it ,can't wait until the next pull , thanks Bruce 👏👍

[@robertfunk6304]

Bruce you absolutely blew it out of the water Business Expense. Your truck is freakin awesome. I was so pumped watching you pull. Great job man can't wait till next one!!!

[@ericgregory3005]

Are you sure you didn't shear an axle? On that last video it looked like it stopped and popped momentarily.

[@dwight072]

I use to watch those jet engine tractors in the 80’s. The Green Monster

[@BeamerTheFox]

hey bruce thanks for covering those jet tractors that was neat to see how they start al all, also truck sounded good ran good an pulled like an animal ! great job great drivin !

[@bjshall5044]

Couple more of the jet tractors, and they'd have to make a 2 day event out of it.

[@kopenhagenkid]

Great video Bruce

[@fredette1978]

Awesome stuff great video can't wait for more pulling awesome thanks for sharing

[@mitchelllarson4794]

Great pull Bruce. Can’t wait to see more

[@DjShockify]

Great run Bruce! Thing is a beast!

[@patrickfracisco8120]

Y'all need to take the pull truck to Cleetus n Cars for the tug-o-war!

[@ramirodorado2884]

I have to say that truck is A BEAST!!!!! it was awesome!

[@dragon-lf9ow]

Sweet truck

[@truckingforlife2320]

its looking better with the Crome bumper

[@Anonymous..VQ3.5Lg35]

Nice pulling great video of other tractors!

[@douglasmayherjr.5733]

Great Video. Nice Coverage of some of the NTPA event. Truck looked good. Should bring it up to Onaway in May. Thanks for promoting sled pulling.

[@Michael-nu1py]

Dam that truck sounds soo good in the higher rpm’s and that big turbo spooling heck yes all that hard work paid off

[@brianbichanich6085]

Now you know where to put some of the weight you need to add

[@ronaldcampbell4596]

Yep truck and tractor pulling is way cool,keep doing it Bruce!

[@alanmacintosh9461]

Glad to see you in ocala

[@jomarcruz1351]

I know hood stack is cool but i think you should do blackout dual stacks set up! 💪💪💥

[@CaptanTaco]

Awesome job Bruce!

[@chris4937]

Please do a POV cam angle from the cab anytime you're ripping on that thing. Sweet rig!

[@GhostRider-ii7tz]

Nice work with the pulling truck.it’s a nasty rig.👍

[@keatonbear8776]

I absolutely love seeing Bruce in his semi rolling that coal, it gives me a rush watching it ....🤙🏼💯full send

[@kingdozer7749]

that was a great pull with that beast sweet truck looking forward to seeing the cam install an whatever else

[@thomashagwood5050]

That turbo sounds insane can't wait to see the marine cam go in and get it dynoed and tuned 3000HP baby!!!! Bruce is gonna pull the sled home with all that power lol

[@ALNunnery]

WOW ,,,THAT WAS BAD ASS'R THAN HELL RIGHT THERE NOW. ..... That camera view from the stands and the way it waa Pullin '.. Wow 👌 Tuff E-Nuff I'd say Cleveland Tenn waivin a Hand ✋️ Sayin Peace ✌️ Love 💚 18 Wheelz to All

[@anthonybaba4946]

love the content... love pulling.. cant wait...

[@lisastokes3074]

beautiful black semi

[@duanesw9garage884]

It’s crazy how it sounds idling compared to when it’s on a roll.

[@Jeff-bq6qe]

Awesome, Bruce awesome to see that you have a fantastic horse power truck that you built especially the motor and watch you go pull in. I used to watch that so much you’re in Canada thank you for sharing your journey. I love watching what you do next and what is your next adventure? Love your channel bro

[@yourgrandmascookin8443]

Love the vids man!

[@Kodi5204]

It always blows my mind in motor sports how people will own them but not drive them where’s the fun in that

[@Living_EDventures]

Great job!

[@DOCTRJ]

Gettin er done Brucey😎

[@waynemclachlan6480]

Truck looks awesome 👌 love the colour of the BAD BOY ...keep it plain looks tough ( may need some sponsorship though ) ...should be happy , was a good run👍, enjoy seeing you having fun..

[@2LateIWon]

Dustin with Smarter everyday did a video not to long ago about the science behind tractor pulls I found it pretty interesting. Theres more to it than just hooking up and flooring it

[@belllpatrick]

Awesome video.

[@marcusjethrow6128]

Great video all ima say is more and longer

[@holdenbrougham1056]

Love the western star bit at the end , the guy in truck puts it flat n Jake n flat again 😂, he was watching you guys filming ,, did you out pull the western star truck?

[@johnscarbrough2926]

I live 35 minutes from Bowling Green Ohio and if you don’t know Bowling Green, Ohio, then you don’t know tractor polls. Hope to see you there sometime.

[@rollingthunder7677]

There is also semi truck drag racing with a load and without.

[@duraspace7285]

We need some in cab views be bad*** to see inside

[@cam80245]

Cool trucks and tractors