Рет қаралды 61
#tractor #diesel #tank #oilproblem #howtosolvethisproblem #workshop
Drain and Clean the Diesel Tank:
The first step was to completely drain the diesel tank to remove all contaminated fuel. The tank was then thoroughly cleaned to eliminate any residual oil and sludge. This involved using a degreaser and high-pressure water spray to ensure all internal surfaces were free from contaminants.
Inspect and Replace Fuel Filters:
All fuel filters were removed and inspected. Any filters showing signs of oil contamination or clogging were replaced with new ones. The fuel lines were also checked and cleaned to ensure no residual oil was present.
Check and Clean Fuel Injectors:
The fuel injectors were examined for any signs of oil contamination. If contamination was found, the injectors were cleaned using an appropriate cleaning solution to restore proper fuel atomization.
Install Oil Separator:
An oil separator was installed in the fuel line to prevent future contamination. This device effectively removes oil from the diesel before it reaches the engine, ensuring clean fuel supply.
Regular Maintenance Schedule:
A regular maintenance schedule was established, including periodic checks and cleaning of the diesel tank, fuel lines, and filters. Routine inspections of the oil separator were also scheduled to ensure its proper functioning.
Quality Control of Fuel:
Measures were put in place to ensure that only high-quality diesel fuel, free from oil contamination, is used. Fuel suppliers were vetted, and storage practices were improved to prevent any future contamination.