Tractor Teeth!; Unbox, Install and Talk on Everything Attachments Wicked Grapple L3301

[@bbcobra04]

I got a 60 inch EA wicked grapple for my Kubota L4701. Love it.

[@functionalguy7]

Nice video, man. Excellent review.

[@Azone14]

Great video and thanks for sharing. I always buy USA products when I can and I am also looking at Everything Attachments, I like the way they present themselves when they show their products.

[@ProjectKing]

Yes I've been impressed with their product. And like I said in video I couldn't make the grapple for the price they charge. it's very well made.

[@joshblack1406]

ProjectKing what is the price of this particular grapple?

[@davesprojects709]

Bought one for my tractor. Best attachment I bought so far.

[@ProjectKing]

It’s really handy! Thanks for the comments

[@HighRoad317]

That’s a sweet beast!!!

[@EODHammer]

About to have to do this on the exact same tractor. Nice! Appreciate it!

[@ProjectKing]

It’s a good setup. Works great

[@TheAussieincalgary]

I would put in a relay (just a standard one will be ok) on the circuit so it only comes on wih the key.

[@ProjectKing]

Thank you for the info!

[@danielsmith2447]

Man you keep your stuff looking nice.

[@ProjectKing]

Thank you! I try to take good care of my equipment. Pride in ownership.

[@Z06redvett]

Nice tractor, I have the same 1. Love it so far. Post stuff when something goes down on it. Thanks

[@ProjectKing]

Okay! I need to make some new videos. Thank you for the comments

[@BS.-.-]

That cylinder they use is a tierod style cylinder and it's the cheapest kind to buy.

[@ProjectKing]

It has held up well.

[@StubProductions]

Great video!! Thank you!

[@tannenbaum3444]

The smaller upper grab bar will expose the cables to be danages....both should be same length

[@kevinashby3784]

I like the square body

[@ProjectKing]

Thank you!

[@randyshofner]

Have the same love it what size backhoe doe you have for your 3301

[@ProjectKing]

It is a BH77

[@panama-canada]

I'm wondering - if you don't have a forklift on your tractor and a pallet, how would you get your implements out of the truck???

[@ProjectKing]

I would haul it on a trailer instead. Then you can unpackage on trailer and lift off with tractors quick attach.

[@91prostreetstang]

Bucket and ratchet straps properly placed can be done as well..... but forks are absolutely needed

[@Kevin-mp6fe]

Nice grapple and great job on the detailed video. Can’t wait to see it in use. You said you would do a video on your pallet forks. What make are they?

[@ProjectKing]

Thank you! Glad you liked the video. I hope to post an operating video before too long. The quick attach pallet forks are made by MDS. I’ve had them for quite a long time. Extremely useful attachment and still number one loader attachment in my opinion.

[@vacountryboylifestyle5097]

So was it hard to install the 3rd function valve with that backhoe ? I have a l3301 and been wondering how it would to add a 3rd function valve with the lines coming off going to the backhoe?

[@ProjectKing]

It’s very straight forward once you know where the lines need to connect. You should be able to find thread discussing it on tractorbynet

[@zpurdie1976]

@@ProjectKing Im looking to do the same as you have done. could you share the kink on tractorbynet? im having and issue on how to connect it up since I already have a Backhoe.

[@jeffreylc]

I can’t decide between the EA grapple and the Top Dog Granite Grapple! 72”.

[@ProjectKing]

I have no experience with the other brand. The EA is made very well. I would like to try the clam shell model also. But for log carrying which is what I do a lot of I like the one shown in video. You can carry logs without requiring hydraulic grip.

[@stevenshuford5829]

I ordered a 55 in wicked grapple for my new 2501 3 weeks ago and they said there is a 12 to 14 week lead time. Has that lessened any?

[@ProjectKing]

I have no idea. I ordered mine a few years ago. Took around 4 weeks I think. Everyone is going crazy buying stuff right now for some reason so all the manufacturers are behind.

[@carlhunt9267]

How much does the 48 inch grabber cost.

[@ProjectKing]

Go to Everything Attachments webpage. They have prices listed

[@js4455dl]

Why didn't you order there 3rd function valve with there grapple looks a light better

[@ProjectKing]

Price was one reason. Also the Landpride unit is the 3rd function kit for the L3301. Kubota owns Landpride. I’m not a huge fan of the buttons on the Landpride unit. I think I soldered they connections on it when I installed. I’ve had no issues with it though.

[@claycall3998]

Great video Just curious about how much are those, I have a 40 hp Mahindra, with bucket, would it fit that ok

[@ProjectKing]

Hello, do you have a quick attach on your front loader? You can get on Everything Attachments website to get prices... or better yet call them. They are pretty helpful

[@claycall3998]

@@ProjectKing hello sir Yes I have quick attach I will check out everything attachments - thanks

[@larrybraley376]

Nice grapple. Where did you get your hose wrap from?

[@ProjectKing]

They came with the 3rd function kit from LandPride

[@jamiewayne2204]

I am thinking of purchasing a grapple for my New Holland Workmaster 55 and wanted to know what you think of the grapple since you have had time to put it to the test.

[@ProjectKing]

I really like it. For the money it can’t be beat in my opinion. The biggest decision is picking between the style I have and the clam shell style. I would like to try the clam shell style for comparison. For what I do I think I picked the right one. If you were going to be ripping out lots of under brush, etc the clam shell maybe better. Good luck!

[@steveshelby2465]

Great video! But I will look for one without a China part! Made in America is what I would prefer, but anywhere except China will work for me.

[@ProjectKing]

I hear ya! Maybe look at Landpride. Not sure where their components are made. The Wicked Grapple has been working well including the Chinese cylinder. Just keeping everything factual.

[@kevinw9625]

I just looked up the 3rd function kit and on the messicks website it stated that their landpride valve kit wouldn't work on a unit with a backhoe. Says the hoses and fittings won't work. Did you have any issues regarding that?

[@ProjectKing]

I was able to hook it up no problem. You don’t use one of the hoses that comes with the kit. If you have any questions you need to talk with your dealer. My 3rd function came from Messicks.

[@joeyj1617]

The 3rd function is aftermarket? How difficult is it to install?

[@ProjectKing]

It’s made by Landpride who is owned by Kubota. It’s not that bad if you are familiar with mechanic work and pipe fittings. Also have to do some wiring

[@joshblack1406]

Is everything attachments stuff made in the usa? American steel?

[@ProjectKing]

Yes I believe they use American steel. The cylinder as I pointed out in video is from China.

[@jerrybrandt9377]

American steel cost too much !! It would of cost more than the tractor of it was all USA built

[@sustainableliving880]

Have you got it dirty yet, or you still painting your nuts black? 😎

[@ProjectKing]

Never did paint the nuts. Grapple is covered in mud right now. Been working great!

[@evelynhensen3318]

THAT tractor is looking a little DULL IT needs another coat of wax and a buff

[@ProjectKing]

Lol! They come from the factory pretty shiny.

[@jerrybrandt9377]

Weird o

[@kaseycasece1340]

YOUNG MAN U DON'T HAVE ANY PROTECTION FOR YOUR HYD . HOSE ON THE BACKSIDE ! .

[@ProjectKing]

It's held up pretty well. But you are right it needs hose wrap put on it.