how to tune-up 2 cylinder engine without timing mark/paano mag tune-up ng 2 cylinder na makina

[@dudongdmc3595]

Pwidi pala paandarin kahit walang takip ung raker arms galing mo talaga boss

[@FarringtonDS]

Thanks TMM - Exactly the confirmation I needed. Well done for a clear video!

[@tractorsmarinemechanic]

Thank you for watching.please subscribed,share and hits like.thank you.

[@RamilMagaris]

Anong valve clearance boss sa kubota 1500?

[@ramilnaciongayo6455]

@tractorsmarinemechanic sir ilang mm ang clearance para sa intake at exhaust valves sa 2 piston kubota engine?

[@erwinmixvlog3073]

Salamat sa video mo sir...sir matanung lang poh kung san tayu makabili ng ganyang makina dyan sa pinas gagamitin q sa dagat poh..sna masagut ang katanungan q..maraming salamat po..stay safe healty and God bless..

[@tractorsmarinemechanic]

Punta k sa may Caloocan s metro diesel Marami nyn.or kpg kpg may pangbili kn kontak k lng at hanapan kita.salamat sa panunood.pasubscribe and share sa video ko salamat.

[@erwinmixvlog3073]

@@tractorsmarinemechanic naka suporta aq sa channel mo idol..salamat sa sagut mo..

[@erwinmixvlog3073]

Dto pa aq sa kuwait idol pag makauwe na aq puntaha q yung lugar na sinasabi mo..

[@tractorsmarinemechanic]

Kung ggmitin mo sa sir sa dagat kailangan mo p ng radiator at water pump.salamat ulit sa panunuod sir.

[@tractorsmarinemechanic]

Ok sir.ingat kayo dyn.hirap Ang kalagayan kpg malayo s pamilya.

[@zxzx-sc8xr]

Boss SUPER!!!Very good!

[@tractorsmarinemechanic]

Kindly share and hits like also subscribe

[@KrversionSecondacc]

🎉🎉🎉great work❤

[@RamilMagaris]

Sir anong valve clearance po para sa kubota L1500 gaya nyan sa video?

[@tractorsmarinemechanic]

,25

[@bongserrano156]

Sir di ba ako magsisi pag bibili ako ng surplus kubuta b5000 mini tractor .. 1973 to 1977 year model.thanks.. im watching your show im so impressed

[@tractorsmarinemechanic]

Basta ok pa Ang unit sir Hindi k magsisi dyn.magsisi k siguro Kung mahal masyado.pakishare nmn sir ng mga video.salamat

[@kangatharan8829]

Thank you so much bro thank you very good work congrats i wont to l1500 clutch plat repairing and New plat chenging video pleas

[@tractorsmarinemechanic]

Pls watch my video,just type and search this one.FLYWHEEL OIL SEAL REPLACEMENT,INTALLED PRESSURE PLATE AND CLUTCH DISK L1801.they are the same pressure plate and clutch or it's the with your unit.

[@mahmoudq8598]

great work ❤

[@sumanmondalsuman7635]

Thanks you very much good working 👍👍👍❤️❤️❤️ tapped clearance Intake valve________? Adjusting valve _______?

[@marianoruiz2983]

Is .25 for intake and exhaust?

[@rajbahadur2162]

hi bro good vidyo

[@tractorsmarinemechanic]

Thank you for watching.

[@anthonyjohnson-uh3lm]

Hey man thanks big help an u the man on this engines could u tell me wat engine will interchange with a z752 on a kubota l185 I can find anything about it on line

[@tractorsmarinemechanic]

Do you mean to say engine of L1-185?

[@jundelacuesta6463]

Thank you

[@vlogkujalanjalan]

thansk brother ...good job

[@tractorsmarinemechanic]

Thank you for watching.pls subscribe

[@danielboyd9507]

Great video.

[@tractorsmarinemechanic]

Thank you.pls share and hits like

[@jerryjosephrojerryjoseph9966]

Sir tanong kulang Sir kung ano langis na puwede ilagay sa transmission sa tractor kubote 1801 Sir.

[@tractorsmarinemechanic]

Hydraulic sir # 68

[@tractorsmarinemechanic]

Salamat sa panonood.pkisahre at subscribe at like n rin

[@gandaravlagadagz2456]

Sir pag naka tdc po ba ung piston number 1 parehas po bang close ung intake at exhaust ng piston number 2? Thanks in advance

[@tractorsmarinemechanic]

Mali po...kpg naka TDC Ang piston #1 dapat pareho po close Ang intake at exhaust nila.kpg TDC nmn po Ang #2 dapat close din aila pareho.

[@gregoriotigon7066]

Sir ilang clearance para sa 1501 Kubota?

[@tiknyo]

how to adjust the kubota 2 cylinder engine valve Z482 brother.. is it the same as the one in the video?

[@tractorsmarinemechanic]

The same.any two clylinder

[@tiknyo]

Tks brother

[@reynaldopapio9036]

Sir saan po inilalagay na kubota yang ganyan makina po sir. ty po.

[@tractorsmarinemechanic]

L1500

[@lacernad7673]

Hey bro can you show how to set up the injection timing on this particular engine ?? Salamat !

[@tractorsmarinemechanic]

Ok...just keep on subscribing I show you someday.

[@Eila751]

Anche a me interessa

[@WELDERUPGARAGE]

Meee toooo

[@ribetsonsuting7461]

no

[@jaymallari9456]

Sir sa f2L912 deutz engine ganyan din po ba ung setting

[@tractorsmarinemechanic]

Deutz sir ay Hindi pa ako napag tune up.pero ibang ibang 2 cylinder n Ang natune up ko ay pare pareho lang po Ang galaw ng arms nya.kaya po Ang masasagit ko po sa Inyo ay pareho lang po siguro.gaya din po ng 3 cylinder magkakapareho din Sila procedure sa pagtune up.kahit din po anong URI ng 4 cylinder iisa Ang rules nila.kaya sa palagay ko sir pareho din Yan sa Kubota,yanmar, ISUZU, Mitsubishi, HINOMOTO,at iba pang model n makina.salamat po sa panunuod at pasubscribe,share and like.salamat po.

[@RodolfoRetorbar]

Magandang Gabi po sir Tanong lang kasi mahirap po paandarin yong Kubota HL 850 CA 450.

[@Σ.Φ.ΜΑΟΜΑΟ]

Hello from Greece. Do you know what filler i use for kubota B7000?

[@tractorsmarinemechanic]

Filter for the engine?

[@cianblanca1493]

Hello sir ano po tamang rotation ang engine ang starter nya ay nakaharap sa block komatsu d94-1 2cly.po ito napaandar ko po pero sa intake manifold lumalabas usok at sa exhaust manifold ang air intake nya

[@tractorsmarinemechanic]

Kanan po nasa video nmn po kung saan Ang rotation ng makina.pwera n lang po Kung marine engine, meron kaliwa Ang ikot.

[@Kideagleania2015]

Sir ilan p ang valve clearance ng cb 500

[@tractorsmarinemechanic]

,25lang ilagay nyo po

[@Kideagleania2015]

Salamat po sir

[@acroduster]

I have an iseki tx1000 it has a ke55 engine. I got it for next to nothing. Found out why. It is missing the entire valve rocker arm assembly and the pushrods. I have not been able to find parts for the ke55 anywhere. But i have found the parts i need for a ke70 two cylinder engine. Any chance you might know if they are compatible? If not i have a full cnc machine shop at my disposal. All i need is the geometry of the parts i need and i can make them myself. If you have knowlege of the ke55 i would love to hear from you as i really want to retore this little tractor.

[@tractorsmarinemechanic]

Thank you for watching,yes it's the same parts not included piston,piston And piston ring.

[@melalonzo8231]

Boss may oil coller din b yan? San nakalagay?

[@tractorsmarinemechanic]

Wala po boss

[@melalonzo8231]

Boss ano head bolt torque at saan nakakabili mga pyesa?salamat idol

[@morfisstefanoudis5750]

how many millimeters do you put in the filler for setting in kubota b6000

[@tractorsmarinemechanic]

Just apply 0.25

[@morfisstefanoudis5750]

@@tractorsmarinemechanic how many kilos we put in the torque wrench for the connecting rod screws and how many for the head in the B6000 kubota

[@melvinjavier8955]

sir ask lang aq ung l2201 hindi mka arangkada pag meron ang rotor nya

[@tractorsmarinemechanic]

May front drive po b or Wala?baka namn subra Ang bacon or matigas Ang lupa.pakiramdam mo b hirap Ang makina or Hindi?

[@georgemoraru1144]

Hi,i have a J285T 2cylinder engine,what filler gauge should i use?

[@tractorsmarinemechanic]

10 or 14 in your filler gauge.

[@tractorsmarinemechanic]

Thank you for watching.pls subscribe share thank you

[@georgemoraru1144]

@@tractorsmarinemechanic same tehnique for adjusting the valve clearence?

[@tractorsmarinemechanic]

Yes...the same principle

[@ignacioberraberra4487]

Hi need you help please, what is the torke on head bolts ona ke85 mitsubishi engine.

[@tractorsmarinemechanic]

58-60 Lbs.

[@ignacioberraberra4487]

Thank you ,you are the best

[@tractorsmarinemechanic]

Kindly subscribe and share.thank you

[@cianblanca1493]

What is the right rotation of an engine komatsu D94-2

[@TeddyAbera-u5u]

How much it's clearance in mm

[@tractorsmarinemechanic]

0.25mm

[@ruelcampaner2416]

Boss ndi ba yan nka open ung intake kc dumiin ung spring eh pababa

[@tractorsmarinemechanic]

Naka open po sir

[@steffendumandan1336]

@@tractorsmarinemechanic sir hingi ako ng tulong sa inyo ang timing mark ng L1500dt kubota ang unang piston ba ay nasa taas?

[@tractorsmarinemechanic]

Alin po b Ang timing nyo.my timing mark nmn po iyan sa gear

[@pepebaterna6162]

Bro saan maka bili ng 2cylinder kubota surplus engine?

[@tractorsmarinemechanic]

Ano po model?Kubota,ISEKI,YANMAR,hinomoto, engine,mitsubishi.alin po sa mga Yan sir?

[@alexanderperez8086]

What the number of filler gauge to tune up

[@tractorsmarinemechanic]

0.25

[@МихаилКузьмин-м1п]

Привет. Подскажи пожалуйста какой зазор должен быть у kubota z650? Какая метка должна быть на маховике для регулировке первого цилиндра, и на какой угол повернуть коленвал для регулировки второго цилиндра?

[@tractorsmarinemechanic]

.25mm and that engine had no timing mark on the flywheel.just follow my video on how to apply valve tappet clearance.

[@МихаилКузьмин-м1п]

Спасибо👍

[@AsitShouldBe]

Hi bro, can you say me the valve play value on Kubota b5001? Thanks

[@tractorsmarinemechanic]

Same as this engine.thank you for watching

[@AsitShouldBe]

@@tractorsmarinemechanic thanks friend, greetings from Italy 😉👍

[@tractorsmarinemechanic]

Thank you also for watching.kindly share,like and subscribe.maraming salamat.from Philippines

[@AsitShouldBe]

@@tractorsmarinemechanic can you tell me how sound my b5001 engine? Thanks friend kzbin.info/www/bejne/gpfRXoCjpMalldU

[@alfieosorio1499]

Boss anu higpit ng cylinder head niyan

[@tractorsmarinemechanic]

65ft-lbs

[@Nz95aus]

Gud showing nice

[@tractorsmarinemechanic]

Thank you for watching pls subscribe share and like . thank you

[@Nz95aus]

@@tractorsmarinemechanic add vedo 3 cylinder perking engine injection pump timing setting same model pump

[@VedastoAbela]

Ang model Yan?

[@tractorsmarinemechanic]

L1500

[@juliusyu2254]

what is the appropriate valve clearance on 2cylinder engines?

[@tractorsmarinemechanic]

0.25mm

[@ergunhamza8112]

how to adjust the cube b6000 does not work

[@tractorsmarinemechanic]

What do you mean cube?

[@HELLOHELLO-my3gq]

Ilang cc po yan?

[@tractorsmarinemechanic]

743 cc po sir.

[@fermintamondong9576]

Ako boss may 2 cylender po ako

[@johnlerrymelendez4235]

Sir sna mapansin mo ko

[@tractorsmarinemechanic]

Tangalin mo po Ang hydraulic pump mo baka sira Ang oil seal.

[@rajbahadur2162]

Hi bro

[@tractorsmarinemechanic]

Hello...

[@rajbahadur2162]

@@tractorsmarinemechanic hi bro hundai Cummins 6cayndar tapped seting video pilza bro

[@tractorsmarinemechanic]

Do you want to know how to tune up 6 cylinder?ok I try to make a video just for you.

[@pyaesone5153]

🎉

[@mavericklouisgalang5347]

Anu engine po to sir

[@tractorsmarinemechanic]

Z750 po ito pang L1500

[@AlpinFagadar]

E valabil reglare si la yanmar 2tne 68

[@ChbjLe]

Dich tiêng viêt bạn ơi

[@johnlerrymelendez4235]

Bos

[@josephmuloza2632]

O

[@sergeperrin2588]

ha dourouab yazi cylnder bikmid chébem Nomberrrrr ouane

[@edgardomartirez6461]

Bakit english pa

[@tadaskabliukas2797]

how many millimeters do you put in the filler for setting in kubota D 750

[@tractorsmarinemechanic]

Thank you for watching.just put 0.25mm in a cold area or place.thank you.pls.subscribe and share.thanks again.