Dave is a riot and a joy to watch. Dude has such a great sense of humor!
@TractorTimewithTim2 ай бұрын
He really does. We thoroughly enjoy having him around!
@RobertVanGorder-m9u2 ай бұрын
Great video, Tim! I agree, Dave is hilarious with great sense of humor. And the best part of the video came at the end when you mentioned there is now a 6-port for the 2038R!! I just ordered one yesterday and can’t wait til you put up the install video (hopefully soon because I’ll need all the instruction I can get). Keep up the great work
@Brucer862 ай бұрын
Sure looking forward to the 6 port single point for the 4 series 😉
@Kcolby472 ай бұрын
Hydraulics are a wonderful thing, and single point connectors make it even better. Nice job of demonstrating and explaining. Fittings and connections still leave me in a fog sometimes. Blessings
@TractorTimewithTim2 ай бұрын
We’re trying to educate … as we learn ourselves.
@Kcolby472 ай бұрын
@@TractorTimewithTimYou{re doing a great job, I{m just a slow learner.😉
@ERICMB24MF37U24F392 ай бұрын
That's a nice upgrade... 👍
@Ned-p1y2 ай бұрын
This is the upgrade I need to do thanks for showing it
@TractorTimewithTim2 ай бұрын
If you want it, buy it soon. It may not be available for long. DHH may stop carrying it
@aaronburford57012 ай бұрын
ce lass is in session with Tractor Tim! love the information you provide, it is second to none.
@malcolmcavalier78492 ай бұрын
Is there a Kubota story coming? The orange hood leaning against the wall makes me curious.😀 The coupler system is a real time saver.
@rcwayt40202 ай бұрын
Hey Tim I got the 6 port single point connector on 2038R figured out. The people at DHH was awsome to work with.
@Thuy_Dailylife2 ай бұрын
Interesting story, wish you always success
@briancarpenter82972 ай бұрын
Interesting project. I just fixed the hose routing on my 3046R. A previous owner installed the Deere 3rd function kit, but didn't follow directions and run the extra 2 hoses inside the protective sleeve, so they were rubbing on the tire. I bought new sleeve and ran everything cleanly inside the sleeve and no more rubbing! I'd love to have a single point connection, but with a cabbed 3R, there just isn't much room to work with.
@TractorTimewithTim2 ай бұрын
Exactly. Not too sure where to put the single point. No room!
@floydferguson53662 ай бұрын
Great video!
@Chipgillette2 ай бұрын
Thank you Tim for this very informative video. You always do a great job with your presentations. Love you content and compassion for the viewer. Is there a 6 port kit for the 4066r cab tractor 2022 and newer? Thanks, Chip
@TractorTimewithTim2 ай бұрын
We don’t know where (or how) to mount it. We could easily provide the connector and hoses. Do not have plans to design bracket at present.
@johnhelbig71102 ай бұрын
I always called them “flat face oring” instead of “oring face seal” but either term describes them well. I have also run into a few male JIC fittings that had an oring halfway up the tapered male nose. Not very common but some of the New Holland backhoes had them.
@TractorTimewithTim2 ай бұрын
Yes, there is a JIC with o-ring. Was used for awhile until ORFS became popular and for all intents replaced it.
@rolando_j_2 ай бұрын
Are those hydraulic lines rubbing in the variation 3 bracket at timestamp 13:32? If they are, you need to remove that chaffing. Since you seem to have some slack in those lines you can usually fix that problem by putting a bit of twist in the hose. Just loose each of the hoses, I'd do it from the quick connect fittings at the top, then use pliers or a wrench and twist the hose until it pulls away from the bracket then lock the routing by retightening the fitting. The better fix is change out a fittting and install a 45° fitting, but twisting the hose usually works.
@nahlij969613 сағат бұрын
I just bought a 1025r 2024 from reynolds. Ifiuc you are in the area. I ilve in the Lebanon IN area. I' m currently invesigating the 6 port single port connector.
@TractorTimewithTim2 сағат бұрын
discounthydraulichose.com/ttwt use code ttwt for 5% discount. I love it! Do you have specific questions?
@MJF402 ай бұрын
I don’t take my loader off enough to justify this. It is great though. For now, Hydro-plus flat face couplers was a great upgrade
@PJ-ku5lp2 ай бұрын
Another sales point for the Multi-Faster 6-port v3 is Deere has officially marked the OEM kit (BXX10283) as incompatible with the 2025R. The bracket apparently interferes with the larger front wheel. As I understand, this kit from Discount Hydraulic doesn't suffer from the same issue, so when the loader I have on order from Deere shows up, that's what I'll be using.
@garyluck85022 ай бұрын
I seriously thanking about this for my 1025. Please tell prices or estimate for these changes! Thanks
@TractorTimewithTim2 ай бұрын
www.discounthydraulichose.com/FASTER6PORT_VARIANT3.html Use code ttwt for a 5% discount on this price.
@dave.lawrence.38942 ай бұрын
Can you use the loader from super Johnny to regular Johnny.. Another GREAT Video.. 😅😊
@TractorTimewithTim2 ай бұрын
Sure. They are both interchangeable. You’ll see this exact action in the next video.
@danamacie1672 ай бұрын
Hi Tim. I have the original Faster 4-port Single Point Connector on my 1025r with the older flat face connectors. Can I get and replace those with the connect under pressure type? If so, what size would those need to be?
@TractorTimewithTim2 ай бұрын
Only need to do so if you have blown the seals. I don’t know of a place to buy them.
@ElletteElliottJackson2 ай бұрын
Patients that I have dealt with in years past from high pressure injected hydraulic fluid ended up with an amputation. There was no way from what the ER doctor said at the Level I trauma center to clean the fluid out of the tissue an the tissue would become necrotic.
@jkwarbirdsАй бұрын
These show out of stock at Discount Hydraulics for the 2025r. Do you know if they will be making more? I seem to remember one of your videos saying they might not.
@TractorTimewithTimАй бұрын
I’ll check into this.
@20truck2 ай бұрын
Where did you get those roller skins for your loader? I'd like to have that so I could move my loader around without having the drag it so much
@TractorTimewithTim2 ай бұрын
deckdolly.com use code ttwt for a 5% discount.
@danmartin66962 ай бұрын
I think Dave is referring to high pressure or hydraulic injection.
@jaredrentmeester98792 ай бұрын
Yes that is correct. When working with oil under pressure, it is important to relieve pressure when servicing or check for oil leaks using a piece of cardboard. If an oil injection injury happens it is important to seek medical attention right away. The oil will have to be surgically removed. Otherwise gangrene can occur and it can lead to death. Google oil injection injury to see what it looks like (graphic).
@Itsa_Mea2 ай бұрын
Yes, HPI Injury for short.
@minutemanmac2 ай бұрын
Tim I know at one point you had one planned for the hardlines, is that still in the works? I have a 2024 2025R and have the hardlines.
@TractorTimewithTim2 ай бұрын
Kinda gave up. If you want to bring your tractor to Indiana, we can fix you up.
@minutemanmac2 ай бұрын
@@TractorTimewithTim let me check with the wife. I'm on Military leave starting in October for about a year so we'd have to come out before then 🤔 or after 😆
@JameAndy-yg1we2 ай бұрын
Just went to discount hydraulics to look for version 1 and it is not listed. Did they sell out or is there a change on the way for it?
@TractorTimewithTim2 ай бұрын
Sold out, may not be back. Go with v3, replace pedestal and all.
@Itsa_Mea2 ай бұрын
O-ring boss because its around the male thread portion. O-ring face because the seal is on the face of the male thread.
@dubworth2 ай бұрын
Wish there was a setup for the '23, I hate the hose setup for the dealer 3rd function, keep falling down near my tire.
@TractorTimewithTim2 ай бұрын
It is possible. Order the v3 kit…then, get hoses to replace the hardlines that go under the floorboard. So, you’ll need 4 new hoses. Are you near me? If so, I could help.
@jasonoreskovich85842 ай бұрын
Can this kit be used if I don’t have a third function and just leave the other two hoses out? This kit is less expensive than the Deere 4 port kit right now.
@TractorTimewithTim2 ай бұрын
Yes. You can remove the extra two couplers
@GrampysTractor2 ай бұрын
What day does our trash go out so I can pick up a 4-port single-point connector?🤣
@TractorTimewithTim2 ай бұрын
Ha!
@GrampysTractor2 ай бұрын
@@TractorTimewithTim Well never mind since I can't drive my tractor anyway since the brakes may fail
@CH-xp5wo2 ай бұрын
You need to give Dave a raise, so he can afford new pants! 😁
@randyosburn5332 ай бұрын
Tim, Buy Dave a new pair of work pants.
@vaughnhatch2 ай бұрын
Tim, is Dave an employee? Love the channel and my 1025R.
@dylanhockaday98782 ай бұрын
I’ve gat a return to tank line also on my tractors for running some w Equipment like my lane sharks or post driver or even my boom saw
@TractorTimewithTim2 ай бұрын
1025r?
@dylanhockaday98782 ай бұрын
@@TractorTimewithTim I have it on a l 2501 with most of the same stuff from the 1025r will cross over but my cuson is in the same ball park as me he has a lane shark on his 1025r
@TractorTimewithTim2 ай бұрын
@@dylanhockaday9878 ok, well, the 6 port would take care of everything cept your tank line. Would still be a big help, and you wouldn’t need your tank line for most operations.
@davew19192 ай бұрын
Is there one for a4066r? Always enjoy your videos! Thanks
@TractorTimewithTim2 ай бұрын
We can likely fix you up with three single point and hoses. However, we have no bracket.
@dylanhockaday98782 ай бұрын
I like that but I wood need a 7 port single point container for all of my tractors
@TractorTimewithTim2 ай бұрын
Why?
@bartonmd2 ай бұрын
Was HH able to use those files for the bracket, or did they have to start from scratch?
@TractorTimewithTim2 ай бұрын
They started with those files, cheapened it a bit to go to smaller steel….then mods to allow the 6 port hoses to fit better. Thanks for your help!!
@bartonmd2 ай бұрын
@@TractorTimewithTim cool! No problem at all!
@paulciampa2 ай бұрын
Tim I have the 4 port with an Artillian 3rd Function kit will the 6 port work with this configuration?
@TractorTimewithTim2 ай бұрын
You really don’t need the 6 port, right? Your diverter is attached to the loader.
@paulciampa2 ай бұрын
@@TractorTimewithTim that is correct my 1025r is a 2019 which I upgraded to include the 4 port Faster quick connect I had the Artillian 3rd Function before I added the Faster quick connection..I'm looking to clean up the hydraulic hoses.
@mattleitch72652 ай бұрын
3:20 embolism?
@MrJ43062 ай бұрын
the actual name of the fitting straight thread oring or stor port
@TractorTimewithTim2 ай бұрын
I used the proper names (at least based on DiscountHydraulicHose.com parts.
@dirtracer87872 ай бұрын
When can we expect something on a 6port for 2023 and newer tractors?
@TractorTimewithTim2 ай бұрын
Do you have 4 port? If so, we have no plans to provide this. If you could bring tractor to my house, I would be willing to help you custom fit it.
@dirtracer87872 ай бұрын
@@TractorTimewithTim I have the 4 port with the hard lines like u showed in the video on the 2023 1025r.
@TractorTimewithTim2 ай бұрын
@@dirtracer8787we don’t have plans for that configuration. However, if you were close enough to me, we might be willing to ‘make it work’.
@texillini12 ай бұрын
What does JIC stand for? Just In Case? 😂
@TractorTimewithTim2 ай бұрын
Honestly, I dunno.
@AirzGamingTTV2 ай бұрын
Not being facetious- what happened to your john deere strike?
@TractorTimewithTim2 ай бұрын
What John Deere strike?
@AirzGamingTTV2 ай бұрын
@TractorTimewithTim you had released a video about boycotting JD.
@TractorTimewithTim2 ай бұрын
@@AirzGamingTTVI released a video where I was not happy with Deere’s political stances: I never suggested a boycott. I said that I was taking no action, hoping they wouldn’t come to their senses. Quite frankly, misinterpretations like yours are the main reason we took it down. Apparently folks don’t listen anymore, they just make up whatever they want to hear.
@AirzGamingTTV2 ай бұрын
@@TractorTimewithTim okay I was just asking thanks.
@randyhughes51602 ай бұрын
What is going on with the woke stuff from John Deere I am not buy anything but oil and filters for service until I know and I was was going to upgrade my 2018 1023e to a 1025r with a backhoe but now I will just wait
@paulsylvester13942 ай бұрын
Sadly, the tractor has been deemed unsafe by John Deere.