Trail Finder 2 suspension mods ! (New project at end of video)

[@jeremyoshea7941]

Hey you got tell me where you got those deep dish wheels the white ones spokes

[@tannersmith694]

Where’d you get the for f-250 body

[@BobSmith1980.]

Z boxes work with the back shackles for more flex. It's another 40 bucks but it adds a lot

[@one_slow_xb03]

Yeah, I got these from a friend for a good price

[@nickmartin8039]

Did the shackles and z boxes up front and in the back as well as removing the smallest leaf from the leaf packs. I'm getting 5 inches from the top of the wheel opening to the center of the wheel. I can flex on top of a soda can now. Nice trucks l love that older ford body where did u get it

[@one_slow_xb03]

They are both custom tamiya bodies, that is some good flex your getting, i was afraid to remove leaf for spring warp

[@nickmartin8039]

@@one_slow_xb03 I haven't seen any spring warp so far. Very nice trucks

[@nickmartin8039]

I also put 100mm shocks in to

[@inyourearhole225]

When I remove the spring from the shock there is no oil in there am I supposed to fill it up with oil?

[@one_slow_xb03]

inyourearhole225 you can but they are notorious for leaking, they are really just for looks at this point, the leaf springs are your springs, in the back they act as limiters to keep the wheels from falling to far in holes of off edges

[@inyourearhole225]

Scale Life 101 when I remove the inner spring the it drops the truck down tremendously.

[@JoseGarcia-oc3pk]

did u shave all corners on front rear leavespring

[@one_slow_xb03]

Jose Garcia just the top corners

[@JoseGarcia-oc3pk]

thanks. so no rear shaave

[@one_slow_xb03]

Yes I shaved front and rear springs

[@smartass23t]

how did you mount the bodies to the chassis? I've been contemplating getting a ford shell for mine, but I don't think the stock tf2 holes match the ford shell. I don't even see mounting points on either of your trucks. LMK, thanks

[@one_slow_xb03]

Check out my video, how to mount hard body on my channel

[@one_slow_xb03]

kzbin.info/www/bejne/iaWooHhnpb-ioZY

[@smartass23t]

Oh yeah, I've used magnets before on a drift car, body kept popping off with slightest bumps. They were strong magnets too but it gets annoying. Not sure I wanna go that route again. I do like the other options, Thanks for the link.

[@one_slow_xb03]

Your welcome, glad I could help

[@mike_c-t7j]

Where did you get the power stroke decal from?

[@one_slow_xb03]

Luis Luis Krawler Konceptz on Facebook

[@bowhunter6000]

Where did you get the f250 body

[@one_slow_xb03]

I built it out of two single cabs

[@ridgerc5976]

Where did you come by that crew cab body?

[@one_slow_xb03]

I built it out of two tamiya f350 bodies, my latter video shows it in more detail

[@cooperfoose-kutty5212]

Please make more videos of the f250 pulling and driving:)

[@one_slow_xb03]

Cooper Foose-Kutty will do! I should have one uploaded this coming weekend

[@Kswaim14]

Can u do more trailing with the F350

[@one_slow_xb03]

Karla Swaim yes I have a show and shine coming up, I will get some trail time there

[@rcantochino6637]

Super...❤️❤️❤️

[@one_slow_xb03]

Thank you

[@coldstne1]

That's very helpful! Thank you for sharing! I love the Powerstroke! Where did you get the roof lights? Again, thanks for sharing! FT.

[@one_slow_xb03]

coldstne1 the roof lights are from a tamiya tundra and thank you for the kind words

[@coldstne1]

Thank you Shane! I checked earlier on the website and they’re currently not available, I think they’re on back order. I’ll have to wait. Thank you again! -Frank

[@one_slow_xb03]

Yeah I had to wait on back order for those and the scale drive shafts myself

[@FordFan01]

Can I ask how you extended the Blackfoot body?

[@one_slow_xb03]

Ford Fan01 I actually bought that body that way but it was built the same way as my f250, buy two cabs, cut in front of one and the back of the other then glue them together

[@FordFan01]

Shane Lovelace no bondo? What type of glue?

[@one_slow_xb03]

I used very little Bondo and a CA glue is what I used don't matter the brand, also make small pieces to overlap the inside to help strengthen the joint

[@FordFan01]

Shane Lovelace ok, thank you very much

[@one_slow_xb03]

Your welcome, if you have anymore questions don't hesitate to ask, I have build pictures on Facebook

[@coldstne1]

Just watching this video again, if you don’t mind me asking... where did you get the shock mount for the dual shock setup/conversion for the power stroke? Absolutely love it!

[@one_slow_xb03]

coldstne1 thanks man, the dual shock mounts are from RC4WD.com

[@carsandtrucks3652]

The Ford F-250

[@one_slow_xb03]

Naveo Neal no I could sell it, it's a replica of my real truck

[@carsandtrucks3652]

Could I buy it

[@one_slow_xb03]

Naveo Neal lol

[@Kswaim14]

Power stroke