Trailer Tongue Coupler Replacement

  Рет қаралды 103,406

Hoffman Handyman Service

Hoffman Handyman Service

Күн бұрын

Пікірлер
@Laura10231969
@Laura10231969 3 жыл бұрын
Thank you!!! I’ve watched several videos and yours is the first to explain that the hook needs to go over the bar on the underside of the hitch.
@Adriva01
@Adriva01 2 жыл бұрын
Everything is great. But...it looks like you still have some wobble on the ball even after the second try. Maybe the nut should be a little bit tighter (?)
@valanti007
@valanti007 4 жыл бұрын
According to the picture on the package that small steel plate should be installed before that short spring not after it. Plate then short spring then nut. Is that correct?
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 4 жыл бұрын
You are right about the picture, however it doesn't make sense to put it together that way. This video is over 2 years old and I haven't changed a single thing from how I put it together in the video and I haven't had a single problem with it. I also am using the trailer almost every day when I am not working on the ambulance (so 4 - 5 days a week) take it up and down some pretty nasty gravel roads and still no issues with it. The nut acts as a retention nut on the plate, which pushes down on the spring this way and keeps pressure on the hook on the inside.
@hellspawn8572
@hellspawn8572 4 жыл бұрын
Hoffman Handyman Service I noticed that too. Even on the piece that broke off it has the flat piece first then the spring.
@davidf9630
@davidf9630 2 жыл бұрын
Just a crazy question about your installation. Would it be easier to thread the nut if you took the tension off the lever ( open it)?
@mikemccain2297
@mikemccain2297 5 жыл бұрын
Good info/video - I’ve had a trailer that’s been sitting outside for over a year that needs this - didn’t know a repair kit existed. Thanks much.
@gonzalo1042
@gonzalo1042 3 жыл бұрын
Wow you saved me!!! Thank you Sir! I fumbled for 2 days trying to figure it out. I’m sure you have helped countless people. Gracias. Gonzalo/Miami
@billtribble7197
@billtribble7197 Жыл бұрын
i had a 2inch coupler with a bad latch. all i could find locally was a 1&7/8". works perfect on a 2" or a 1&7/8. ball hitch now
@billiethorne9145
@billiethorne9145 3 жыл бұрын
Thank you for helping us old folks
@hillbilly2141tn
@hillbilly2141tn 2 жыл бұрын
Thanks for the vid. I just hit mine with the mower and launched the lever across the yard. I was worried I was gonna have to replace the whole tounge! Good info!
@parnellmahoney7831
@parnellmahoney7831 3 жыл бұрын
I had to remove the rectangular washer altogether in order to have enough threading showing on the bolt (1 - 1&1/2 threads) to satisfy the safety warning. Think that's okay? I'll be checking it periodically to see if it needs tightening per the instructions and saving the washer in case there's room for it down the road after usage. Also my ball clamp sticks even when I unlock the coupler lock - I have to jiggle it extensively to get it to disengage. Not sure why.
@dennisgray563
@dennisgray563 5 жыл бұрын
That bottom plate is supposed to be turned sideways! Otherwise it can still come lose
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
I had the same thoughts and went back later and changed it, however it does appear the way I first installed it on the diagram from the manufacturer.
@brojamessistertrise5289
@brojamessistertrise5289 4 жыл бұрын
You just saved me a huge headache. Thank you so much!!!
@whatRU5
@whatRU5 Жыл бұрын
Confused. That package shows the plate fitting on before the last spring & nut. But you put the plate on after the spring. Why?
@ryanretzlaff4860
@ryanretzlaff4860 3 жыл бұрын
Thanks for the great video. It was a lot more simple then I imagined.
@franciscogama930
@franciscogama930 2 жыл бұрын
Semi-unrelated, but was your ball loose and was that part of the plan?
@naruttaanime9471
@naruttaanime9471 4 ай бұрын
10 cents Tip: sand rust, remove dirty grease underneath and prime and spray. Finish off topcoat over the zinc plate to stop next years rust. ReApply grease 15 cents Tip, nylon nut is one time use. In future, use a new nut each time removed.
@geod3589
@geod3589 4 жыл бұрын
My kit has an extra washer not shown in this video.
@clydetheglide4198
@clydetheglide4198 3 жыл бұрын
What did you run over it for? Just saying I just ran over mine
@delinquentdesign
@delinquentdesign 5 жыл бұрын
so are the kits pretty much universal? they fit any tongue?
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
I would honestly say so. Your best bet is to look at the shape of the hole on your trailer tongue and compare it to the shape of the bottom on the coupler.
@delinquentdesign
@delinquentdesign 5 жыл бұрын
Thanks this is very helpful
@nicosends
@nicosends 2 жыл бұрын
having trouble getting the ball in after replacing… all 2” so idk what the problem is
@acbivens8729
@acbivens8729 Жыл бұрын
I have heard that them replacement go by weight and if u get the wrong weight size even all 2 inch it won't let the ball go in
@horseman62
@horseman62 2 жыл бұрын
thank you! just what I needed to see!
@julienplouffe1170
@julienplouffe1170 Жыл бұрын
Helped me out so Much! Thanks man
@wildwoodtop
@wildwoodtop Жыл бұрын
Nice job Son! 👍
@Cambigdongbjj
@Cambigdongbjj 5 жыл бұрын
Mine for some reason won’t shut at all and I got it adjusted all the way
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
Try releasing some of the tension on the nut on the bottom. It doesn't have to be torqued all the way down. Just tight enough to where there is no play between the ball and the hitch.
@Cambigdongbjj
@Cambigdongbjj 5 жыл бұрын
Hoffman Handyman Service I tried that I got it to were the bolt is flush with the screw and still won’t close
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
@@Cambigdongbjj I really don't know. There really isn't a lot of parts to it for it to mess up like that. Maybe the handle/lever is defective? Only other thing I could think of is it may not be the same size ball and/or coupler.
@Cambigdongbjj
@Cambigdongbjj 5 жыл бұрын
Hoffman Handyman Service when I installed it I had the coupler open and u did it closed could that be the problem? I’m at work now won’t be able to mess with it for a little bit
@finesgarrison6972
@finesgarrison6972 3 жыл бұрын
@@Cambigdongbjj check to make sure you are on the pin on the back of the tongue
@ilovemydad1416
@ilovemydad1416 5 жыл бұрын
Where did u get that
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
I got it at a local farm equipment store, but I have seen them on Amazon.
@geod3589
@geod3589 4 жыл бұрын
You can buy them at Tractor Supply and Northern Tools.
@ilovemydad1416
@ilovemydad1416 4 жыл бұрын
@@geod3589 thank you
@geraldharper364
@geraldharper364 Жыл бұрын
Thanks just what I needed
@robertvargo9824
@robertvargo9824 4 жыл бұрын
Thanks for the video. Just what I was looking for.
@johnpoulson384
@johnpoulson384 Жыл бұрын
Thanks. Sometimes the simplest of things 🤪
@greatagainmowing8296
@greatagainmowing8296 5 жыл бұрын
Very, very helpful-thanks!
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 5 жыл бұрын
Thank you! I'm just glad that they make those. That was a bad way to start the day!
@mykemorris1
@mykemorris1 3 жыл бұрын
Thanks. Very helpful for a (should be) simple) fix.
@Whissht
@Whissht Жыл бұрын
This video save me money 💰
@Whissht
@Whissht Жыл бұрын
Thank you
@lolecksuburbs3766
@lolecksuburbs3766 3 жыл бұрын
Hey I’m not sure anyone else noticed this or not but your towing ball is loose. The nut that holds it on you can see moving back and forth in your video. Not good. i think my dad commented this because this was not me XD
@Themelaninjeeper
@Themelaninjeeper 4 жыл бұрын
Thank you! I wasn't sure what to do when I ran over mine and broke it. This saved me a bunch of headache.
@debciszewski7458
@debciszewski7458 3 жыл бұрын
Awesome, thanks much, great video!!
@TheAti2d
@TheAti2d 7 ай бұрын
The diagram shows the plate going before the last spring. The company needs to fix that before they kill someone
@bigshowradio_550
@bigshowradio_550 4 жыл бұрын
I just found a kit from CURT on EBAY out of California for 9.13 with free shipping.
@hoffmanhandymanservice8292
@hoffmanhandymanservice8292 4 жыл бұрын
Doesn't surprise me that Curt would have something like that. I honestly didn't think to look there! Good find and great info! Thanks!
@bigshowradio_550
@bigshowradio_550 4 жыл бұрын
@@hoffmanhandymanservice8292 No problem....I searched the one you got but saw the curt model. I ordered it this evening. Hope it works. I ran over mine tongue with my truck tire and snapped the old one. LOL
@fico81
@fico81 3 жыл бұрын
Great video thank you!!!!!!
Trailer Coupler Service
10:57
Locker's Garage
Рет қаралды 65 М.
A Simple Secret to Backing Up A Trailer (YUP ANY TRAILER), Like a Pro
4:22
Smart Trucking
Рет қаралды 4,4 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
How Do I Replace A Trailer Coupler??
16:06
The TrailerSmith
Рет қаралды 21 М.
DON'T HIGHBALL your Trailer Coupler!
8:09
Big Truck Big RV
Рет қаралды 339 М.
ELIMINATE TRAILER TOW HITCH RATTLE - 2 Old School Tricks
4:40
D&E In The Garage
Рет қаралды 166 М.
Utility/Boat Trailer Coupler Latch Replacement Kit
8:06
Real World Backwoods Ingenuity Shade Tree Projects
Рет қаралды 7 М.
Turbo Fan Dusters are getting out of hand
14:08
Torque Test Channel
Рет қаралды 1,6 МЛН
Welding a adjustable trailer coupler on
10:59
Meltin Metal Anthony
Рет қаралды 27 М.
Making another pickproof lock (but better)
15:14
Works By Design
Рет қаралды 5 МЛН
AWESOME TRAILER TECH!  CURT QuickPin Coupler for RVs and Trailers!
9:36
Big Truck Big RV
Рет қаралды 28 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН