What to Know About the Repair Kit for etrailer and Ram Channel Tongue Couplers

[@travisblack2941]

Thanks, gave me the confidence to do it, though that spring was much more springy than I thought. Took me a while to get that compressed, much smaller space than the coupler in the video, but very helpful video.

[@yakityakteriw6774]

THANK YOU. I just did mine this morning. I followed your video a T. I just don't understand binding. ?

[@etrailer]

If your latch is binding, you may have the nut on the bottom too tight or you may need to spray the latch with some white lithium grease and open a close it a few times to loosen it up. www.etrailer.com/Accessories-and-Parts/etrailer/CT-2000-RK.html

[@yakityakteriw6774]

@@etrailer thank you. I'm testing it this weekend but I didn't understand what binding meant. Thanks for explaining

[@Josef_R]

You saved my ass with 3:15. I couldn't figure out how to get the spring in place with the bolt all the way down. Never occured to me to back it out some.

[@yakityakteriw6774]

What kind of grease? I am fixing this tomorrow

[@etrailer]

You can use some white lithium grease or bearing grease to ensure smooth operation. www.etrailer.com/Accessories-and-Parts/etrailer/CT-2000-RK.html

[@IcarusWelding]

Very helpful as I wasn't watching carefully when I took it apart.

[@edkossmann9002]

Super helpful!

[@etrailer]

Thank you for sharing this feedback with us! We are happy to help! Check out the following link to see this kit on our website. www.etrailer.com/Accessories-and-Parts/etrailer/CT-2000-RK.html