Trailmaster 150 XRX Carburetor problems and repair.

[@James_Hough]

I appreciate the video. Couple of things. The black cylinder on the side of the carb is the enricher. It allows an "extra" circuit to flow additional fuel at startup (rather than having a choke). As the engine warms, a needle inside slowly moved forward and blocks the enricher circuit by the time the engine should run without it. Next, there is no fuel pump. The engine vacuum pulls the valve open and allows fuel flow by gravity. It is, essentially, an automatic petcock.

[@rubenorona3684]

Is there a way to bypass enricher or a carb with manual choke

[@bryanschley5000]

Great video. Very clear and a real help. I have a short attention span, so this might be the longest video I've watched end-to-end. I bought one of these for the kids in 2016. It ran okay for the first summer. By the next spring I paid a local mechanic more than a couple hundred dollars to get it running again and it lasted most of the summer before it just stopped working altogether. There is sat for years. I found this video when looking to "just get rid of the thing". I drained the old fuel, charged the battery, replaced the carb like in the video and didn't even have to clean the air filter it had so little use. It fired up after about 5 seconds of cranking and fires up immediately ever since. So for about $40 and 25 minutes, we have an awesome little go kart thanks to Jo Daddy's Workshop video!

[@p.erdey1958]

I just acquired a trail master blazer 200 EX. From my granddaughter and son n law. It has been sitting up a little while. I know I need to change or clean carboratir . I am almost 65 a woman 👠 and I am so excited!! I am somewhat motor literate. I love love learning new things! Going to try to make it street legal. Doesn't need much for me to do that! This thing is loaded! I just need a lot of cleaning and tweaks. Got all the wasps out! The rest should be easier!! (I hope). It does run, but it lags and sometimes takes a minute to get it to turn over. But I don't give up easy, I learn fast and I am not a quitter! I will be checking on you for some things. I like the way you explain things!!! Ty

[@weathermannax416]

After watching this I see I have lots of missing components. There are no T-fittings on mine. I got hoses with no place to go. Mine will start at first and run for a while then stall. I can get it to run longer if I hand choke it. The longest I had it running was about 12 minutes idling. It will not run on half to full throttle or it will run out of fuel (run too lean). The electrical is the choke on a GY6 engine.

[@cpsencik04]

Awesome that I am watching this in January 2021, not even a year later and you grew from less than a thousand to over 3.2k! Congrats. Great Video

[@markbostic97]

I have a 2007 Carter Brothers 150cc I got in the 6th grade back in 2008. It is almost identical to this one; crazy to see how much hasn't changed. The body and frame are exactly the same. However, mine didn't have indicators, a horn or a speedometer. Those carbs are a pain in the ass, mine is being fixed right now.

[@brich531]

Hey...you may be able to take out some of that lag by tightening up the throttle cable by adjusting the two nuts on the bracket that is attached to the carburetor

[@jlrhauler]

I have hammerhead 150, I’m having the same lag as yours. More of a bog. I’ve check spark and the spark seems a little weak. If you find your problem please post. Great video.

[@elsdp-4560]

THANK YOU...for sharing. Wires coming out of the little black box on the side of the carb is an electric enricher, this is what goes bad on these China engines. It looks like fun. Nice fix.

[@NomadMechanic]

I just did one today and it's running sluggish also. Maybe the high speed jet needs blown out again or soak it in solvent to dissolve the tiny film inside the carburetor port's. Also have found new carburetors on amazon for cheaper than I can clean one. $30

[@ralphdavis10]

I’m so glad I found your video/channel. I’m going through a similar thing but it dies when I give it gas. Carburetor is clean, air filter is fine, and I have checked for vacuum leaks. I changed the spark plug as well and still goes dead when accelerating. Any help or info would be much appreciated.

[@jodaddysworkshop786]

These carburetors are finicky. That's mainly why I just replaced it.

[@stevenfreeman5917]

Do you know why my trail master blazer 200cc is acting like it's losing acceleration going uphill

[@bullydad1694]

Hey man good video. I'm working on one of these for a friend of mine now. It was doing the same thing yours was when you hit the gas it would die. After looking at the carburator everything was good in there. So it ended up being bad vacuum lines. That could be part of the reason it feels sluggish. Any way you look at it these things are garbage and that motor I can't say a good thing about them. Good luck with it.

[@mariahramirez3450]

where does the hose coming out of the manifold go to??

[@rebelkeeton3532]

Were having the same issue with ours. My husband and dad both say it's electrical and wouldnt listen to me when I told them it could be the carb or the gas. Thanks for clarifying. I sent them the link to your video. Maybe they will listen now since a man is telling them. 😆 anyways, thanks so much for the video. Can you send the link to the website you bought your carb from? Thanks again and looking forward to the updated video.

[@jodaddysworkshop786]

You're welcome. Links are posted in the description box.

[@jerrygracey3066]

Thank you for that video. I purchased one that needed a little more work. I did end up buying a new carburetor also. But it takes several attempts to get it started when it’s cold. But once it stays running it seems to run good. Seems that it needs the choke adjusted ??? Any idea what or how that can be adjusted? Thanks

[@jodaddysworkshop786]

No advice on adjustment.

[@jesserusch333]

Hey! I have the same unit, and the other day I folded the pivot point and punctured the gas tank. I bought a gas tank from Canadian Tire for a lawn tractor and installed it, got it running, but now it stalls randomly. Just bogs down after accelerating a bit. I'm not great at mechanics, but this fuel tank I bought was for a 196cc engine, whereas these are 150cc. Do the gas tanks have a air restriction based on the cc that would cause this?

[@jodaddysworkshop786]

Tank shouldn't matter.

[@jjbhomestead5217]

Good Video. Where is the update vid. Four months and no new news. How is it running?

[@jodaddysworkshop786]

I hadn’t thought of that. It’s running great. I’ll see if I can get a video together.

[@BB-sn4ru]

@@jodaddysworkshop786 thanks. And that's good to hear. I bet a lot of people be interested in seeing it run. Look forward to another video on it

[@Jesus_Saves_J2415]

My Trailmaster starts up and stays running fine but it will not move forward or reverse. The belt is fine and the cvt looks good. Chain is on and I tried adjusting the shifter and nothing. Brakes aren't seized. I'm at a loss... Any thoughts?

[@jodaddysworkshop786]

Can you push it around easily?

[@Jesus_Saves_J2415]

@@jodaddysworkshop786 yes we can push it.. but it's a little stiff

[@jodaddysworkshop786]

Then something seems to be out of adjustment or perhaps the drive unit is broken. I had jacked mine up to spin the rear wheels and found the brake caliper was stuck. I did a replacement video.

[@Jesus_Saves_J2415]

@@jodaddysworkshop786 thatd be great if that's all that's wrong with her... I will jack her up and try it myself. I'll search for your video to help me out too. If I figure out what could be wrong with her I'll let you know. Thanks

[@Jesus_Saves_J2415]

Hey * just fixed her! It was the drive sprocket 😂 it was worn and the teeth for the shaft were balled!

[@davidnationjr3988]

the motor on it is called a gy6 motor and u can change the weights on it to change the speed with pullys on the left side where ur muffler bolts to

[@eddiesandoval3560]

Make videos

[@eddiesandoval3560]

My xrx does feel sluggish when I hit the gas maybe it’s meant to but not sure

[@newbieguys2361]

I’m having same problems with mine. Very helpful thank you

[@fidelnorzagaray1987]

I just install the new carburetor at at a tao tao 150 cc same like yours but it won’t start I put the new spark plug and cable too do you have any idea what’s the problem ?

[@jodaddysworkshop786]

I don’t. Sorry.

[@gabbythesavagegamer3306]

I have same go cart missing air box . Can you tell Me what air box to order

[@jodaddysworkshop786]

No idea.

[@christiandillon5603]

I have one of them go kart but mine turns over but wont crank eney ida what that is

[@jodaddysworkshop786]

Sorry. I don't.

[@laiwill6577]

Where is the lines coming from the tank

[@omard1855]

Hi Jo, I have a 200xrx 200cc with the same issue: would this carb work on my 200cc? I'm only asking because it is very identical and the exact same part # but different cc's. Please advise if I should proceed with purchase. Thank you and the video was very helpful!

[@jodaddysworkshop786]

If it's the same part number, you should be good.

[@joseph7252]

I got the Mid XRX off of Offer Up for $50! But it dosent have all the cool features that the 150 dose, like turn signals, reverse, and over head lights

[@kellieboylan4184]

Awesome video! Thank you.... we have been having nothing but problems with ours since we bought it. Please anything else with update asap!!!!

[@TheDelong6]

Can you tell me what the tube is called that is coming out of the air intake? I'm trying to fix one up for my son.

[@jodaddysworkshop786]

I don't know for sure, sorry.

[@johncottier6384]

Barry that was fun thanks you are a man after my own heart

[@sherrylachtrupp7854]

I need help with my 2020 Trailmaster 200 EX. I bought it brand new and it has always made noisy brakes squeaking since I have had it. I thought after time it would stop and it has not. Also, from time to time while driving it sounds like the brake is squeaking / grinding. Any suggestions from anyone is greatly appreciated.

[@jodaddysworkshop786]

I have had issues with the rear brake caliper hanging up. I made a video, but have not uploaded it yet.

[@Jesus_Saves_J2415]

Mine did the same... It's the parking break. Just adjust it or remove it and your drag will go away

[@davidcherylbarch2802]

Looks like a lot of fun! Thanks to you we want one now!

[@eddiesandoval3560]

Where did you buy parts for this exact trail master

[@jodaddysworkshop786]

Found them online.

[@user-jo4dy]

What size are those screws attached to the throttle linkage

[@alishiadavis8033]

mine idols and starts but it won’t pull to drive and I replaced my carburetor already .. any suggestions please

[@jodaddysworkshop786]

The shifter won't move?

[@alishiadavis8033]

Jo Daddy's Workshop I don’t have a shifter.. that I can see anyways

[@jodaddysworkshop786]

@@alishiadavis8033 Really hard to diagnose without seeing it.

[@mattdwyer9432]

@Caroline Putnam did you get it remedied? I've literally worked on mine more than I've rode it!

[@jlogan1971]

Where did you buy parts

[@jodaddysworkshop786]

Amazon

[@atikrobetly4684]

what is the width of the chassis.?

[@allenclark271]

How hard would it be to just pull the motor and replace this fuel pump?

[@jodaddysworkshop786]

No idea.

[@neil7692]

Great video! Get yourself a set of wire drill bits. (Amazon) They are tiny. These carbs have such tiny jets and ports in them. They clog with the slightest varnish. I have 2 spare carbs I keep ready to go. Also, just some advice, 1. Don't crank on it for long periods( the starters are tiny and will die easily) 4 or 5 revolutions and let the gas run down to the carb your are discharging from the tank, then another 4 or 5 revolutions, etc, etc. 2. Don't pump the gas pedal. The choke is electric. There is no accelerator pump like on a car. Treat it like a fuel injected car. 3. Finally, Seafoam and Stabil don't seem to help...maybe they even make the things in the carb clog worse. Have a blast and try not to kill yourself.

[@rubenorona3684]

Is there a way to put a carb with a manual choke or bypass

[@debrabrittenham8082]

Good for you! I am going to have to do the same with my buggy ..

[@rudeboyfamily]

hey Jo! I just got one today that I thought was cheap. i paid $1k do you think i made a good decision? runs and all, new battery too. i love it but know nothing about them other than the basics. the thing is pretty darn big in my opinion

[@jodaddysworkshop786]

Depending on how old it is. Likely a good price.

[@mycookiehasnoname]

That sounds insanely expensive, in my opinion. (As a mechanic) I'd give maybe 400-600$ for one..

[@shawnii10]

Where did you get the fuel valve

[@jodaddysworkshop786]

Amazon.

[@jaimegilbert1065]

@@jodaddysworkshop786 I need HELP

[@bigboitv3794]

Are you in Ga and you repair for customer?

[@jodaddysworkshop786]

I don’t do repairs on these for others. Sorry.

[@bigboitv3794]

Thanks for the reply and I enjoyed the video

[@patrickhensley5281]

I have a trail master to. Where did you purchase your carburetor from?

[@jodaddysworkshop786]

Amazon I believe. I think I posted a link on the description.

[@RobertoPerdomo-q9o]

Eso es con 150cc?

[@jodaddysworkshop786]

Yes

[@alejandrotrejos8723]

How long anda wide the buggy is ?

[@jodaddysworkshop786]

7 feet long, 4 feet wide, and 4feet 8 inches tall

[@danladeroute123]

Just bought a 150 cc buggy. I have it going probably close to 30kmh was told to make it faster to take out the governor in it. Any videos on how to get it out?

[@jodaddysworkshop786]

I do not. Sorry.

[@jasonurban3597]

U have anymore videos please and thank you. Awesome job buddy. U da man

[@jodaddysworkshop786]

Sorry, I do not.

[@daviddeleon6528]

Mine won’t crank thinking it’s the ignition switch.

[@jodaddysworkshop786]

Mine has a switch built into the brake pedal. Have to press it down like a car before it will start.

[@andrewthurman928]

check the fuse first

[@justme7950]

@@jodaddysworkshop786 can you tell me where the vacuum lines go I know it comes from the tank valve to carburetor but where does it get it’s vacuum I have a carburetor coming

[@mycookiehasnoname]

Video title: "carburetor repair" 4 minutes in: "so I bought a new carburetor Amazing.

[@jodaddysworkshop786]

Actually, it says carburetor problems and repair. Read it again. lol

[@mycookiehasnoname]

@@jodaddysworkshop786 Are you high? You literally just repeated that it, indeed, says "(and) repair". How does "lol I googled it and the whole world wide web told me to buy a new one so I bought a new one" have *anything* to do with repairing? Also - a simple, basic tip if you want to be a youtuber; don't jump at every chance that you get to be a defensive, rude, condescending asshole.

[@darylcoston1554]

Outstanding video sir. Thank you.

[@jamzwilkins]

I have and XRS but engine looks the same. Have you thought or considered rebuilding the old carb with a kit to boost performance?

[@jodaddysworkshop786]

I have not. Do you have a part number?

[@The85F0X]

You look like you probably have the tools to do it, go to harbor freight and get a 2500 winch. I mounted mine on the passenger side just in front of where the foot rest is. If you are having issues with the stall I would replace my plugs and put in a better coil pack.

[@giliethedeliveryman3516]

Make sure to use gas that has no ethanol. If you can find it you will definitely not have carburetor problems anymore.

[@gabedramstad6917]

That's a nice pickup!

[@jodaddysworkshop786]

I built it. Look up FrankenTruck HD. It's on my other channel. Jo Daddy's Garage.

[@JohnPage-b5i]

Thanks for the video it really help

[@bamagator13]

GREAT video... thanks!!!

[@p.erdey1958]

❤ty for this video!!!

[@bdass68ss]

Agreed..premium only..they have a little lag..could try checking and setting valve lash,its .004,intake and exhaust

[@angelalopez2715]

What are symptoms if valve lash is off

[@bdass68ss]

@@angelalopez2715 sluggish,bad throttle response..could make smoke..if too tight,will be loss of power,hard to start

[@lonnieperkins6780]

Where do the vacuum hoses go from the carb tee ?

[@justme7950]

Did you ever find out about the vacuum lines I’m having the same problem

[@skor178704]

Same

[@justme7950]

@@skor178704 I watched a few videos on the tube it looks to me like it connects to the fuel tank then to the splitter going to the carburetor and attaches to the intake there’s a nipple sticking out of the rubber intake tube where it gets it’s vacuum and it will not run without it

[@skor178704]

@@justme7950 thanks! Got it!

[@justme7950]

@@skor178704 let me know if that works for you cause I’m still waiting for my carburetor to come in thanks

[@davebrittain9216]

Nice score!

[@eddymeraz85]

Thx. Very informative 👏

[@gregworkshop5713]

hi it go yes are a lot of fun .

[@jonpippen6998]

The oem carb is way better than that ebay/amazon garbage. They look the part but are most definitely not. Yes thats an electric choke aka enricher....also junk...best thing is to bypass it.

[@angelalopez2715]

Where do i get oem carb and how can i bypass the enricher

[@JK-hy5ey]

I want it!

[@JimPulley]

Check your belt

[@JK-hy5ey]

Thumbs up!!!

[@p.erdey1958]

Oops carburetor!

[@saidousseniabdou5764]

Santé

[@RCbashingtheKRATON]

You have to run premium gas,,,Reg. Gas has ethanol and ruins the carb...

[@noahmorris2469]

Im savin up now