⚡Transform Your 2024 Harley Davidson Road Glide with

[@khrisjames5880]

Watching him run wires on these meat hooks so easily brings forth a rage only god could understand just from the absolute torture I went thru trying to run the wires for my 14” meathooks.

[@sikbaggers]

hahah man ive been there...i mentioned that at the end of the video..some meat hooks have a sharp angle inside them too which makes it a real pain to pull wires..but these have a flat 90 inside them..so much easier

[@khrisjames5880]

@@sikbaggers I’ll keep that in mind if I’m ever brave enough to try to wire another set on my own!

[@mikepaiz831]

Great install video getting my factory 47 12” bars install this weekend!!! Thank you sir

[@sikbaggers]

glad to help Mike!

[@CraigAquilina-fw3nn]

Great video Steve hope all is well for you,see you in the next one.

[@sikbaggers]

thanks for checking it out Craig!

[@MaxStreetGlide2023]

Nice video Steve I’ve been thinking about different bars looks like I could do myself thanks

[@sikbaggers]

they are super easy to do on the 24s....older models arent that much different but a little less wires to pull through now

[@miguelotero4414]

Is it necessary to change to put poly bushing when changing handlebars and if so, can you make a video changing the bushings?

[@sikbaggers]

no you dont have to but you can. All you have to do is get it down to where I removed the handlebars and then youll see a pinch bolt on the neck and pinch bolts on the upper fork legs...tap the top tree off and then you have access to the bushings. Watch my other video here on T bars and it covers removing the tree top kzbin.info/www/bejne/gXisc4WondmXfqssi=qefc3Xgu-skqbWvd&t=622 and also at 11:35 you ca see how to put in new bushings.

[@u.s.aarchangelforgod3679]

TY Steve solid video 💯

[@sikbaggers]

thank you sir!

[@u.s.aarchangelforgod3679]

@@sikbaggers welcome 🙏

[@jetpilot111]

Great video.

[@sikbaggers]

thank you!

[@Smokin740]

Did you have any issue with the bars sitting in the mount correctly? On mine the welds are preventing it from sitting flush. It’s like I need to grind or file a little bit off of the mount for the bars to sit tight in the mount. The way mine currently is don’t seem safe, the knurled parts on mine arn’t even touching, they have a small 1/16 - 1/8” gap

[@sikbaggers]

no..everything sit in there just fine...give them a call they will make it right ..maybe send some pictures to their email

[@nycace179]

Steve how tall are you ... i am looking at buying bars for my 2024 and this looks like a solid product

[@sikbaggers]

I am 6 foot tall...and these were perfect for me

[@toddcochran6416]

How much leverage did the bigger bars create on those rubber bushings? Stock has quite a bit of flex and I’m really not liking that.

[@sikbaggers]

no more flex than stock to be honest...you should change out your bushings to urethane bushing..I wouldnt go with solid ones unless you want your hands going to sleep form the vibrations

[@neano62]

So there is no wire running through the bars if you have heated grips?

[@sikbaggers]

the wires for your grips are already in the wire harness in the bars so you only need to plug them in in the switch housing now. Super easy.

[@neano62]

@@sikbaggersalright cool cause I got a 24 CVO

[@jaylobos4015]

Can I put 12" Dominator Meathook bars without changing the cables out? Dominator does not make 11".

[@sikbaggers]

yes you can...move the two cables off the side of the neck like I showed in the video and youll be fine

[@jaylobos4015]

@sikbaggers ok, I heard you mentioned on the video that 11" is the absolute highest we can go, making it a total of 13". If I go with a 12", it will make it a total of 14".

[@jaylobos4015]

I ordered the 14" Dominator Meathooks, but from my research, I think I will have to buy the extended cables which I don't want to, so I am going to return them and get that 12".

[@sikbaggers]

@@jaylobos4015 aaah shit jay thats my bad man I didnt even look and see this comment was on the 24 bike...its weird on these bikes because some companies are listing them with the riser height included and some arent..id give them a call...they will know for sure

[@jaylobos4015]

@sikbaggers The risers are, in fact, 2"? Correct? So, with my 14" bars, it will be a total of 16", which I think i will need cable extenders.

[@anthonysolorio3864]

Have a 93 softail heritage classic im putting a 21 inch with rotor from DNA and the speedo dont match up with rotor like a inch gap do i use old spacer and rotor off old wheel or spacers

[@sikbaggers]

yeah I dont know bro...id give DNA a call..seems like they have some issues with their wheel set ups

[@steventwiddy3402]

Hey Steve not that this has anything to do with this video but I have a 2010 streetglide that I need to roll the handlebars forward a inch or so, I ordered one of those T handle ignition tools from amazon so that I can get the lock and all realigned but I’m not really sure on how to use that tool, do you have any suggestions on this ?

[@sikbaggers]

Yes sir..watch this video here, ive started at the time that I remove the ignition and show you how to use the tool..this si 2013 and older. kzbin.info/www/bejne/pXymdJurabOahtksi=y594eNwDPhtafbg-&t=436

[@zavlo72]

clutch line needs more slack

[@sikbaggers]

that clutch line has plenty of slack

[@Prometheus1979]

Not bad looking bars but I’ve never been a fan of the meat hook bars.

[@sikbaggers]

ive never either to be honest but im digging these now that I have them on