Transform Your Bucket With Clamp-on Debris Forks From YITAMotor

The YITAMotor debris fork is an effective tool to pick up brush, wood chips and other debris. Its easy to clamp the brush forks on your tractor bucket and with a 2500lb capacity, its strong enough to see your brush removal project start to finish.
Get 15% off debris forks with code FLATCREEK15 (discount valid until April 5, 2022)
Debris Forks Link: bit.ly/35lrP1E
Get 10% off ANY PRODUCT with code FLATCREEK10 (discount valid until April 5, 2022)
All Products Link: bit.ly/34bMNPS
Brush cleanup with a compact tractor is easier with a clamp-on debris fork. This is a low cost alternative to a grapple that helps transform your tractor bucket to a versatile brush and debris cleanup tool. Adding these forks to your bucket is as easy as turning the threaded clamping bolts. At just 42.5 inch wide, these debris forks will fit a large variety of subcompact and compact tractors Don't forget to subscribe and join us on Facebook, too / flatcreekoutdoors

[@bfoutdooradventures]

I like the demo Phil, Imagine the potatoes you could dig out of the garden with it. I think it could be of use to someone that doesn't have the money to spend $1000 for remote hydraulics and another $2500 for a grapple. 👍

[@FlatCreekOutdoors]

I didnt think of the potato digging. I get that would work! I think annual garden cleanup or a lot of yard waste, it would be good for moving around that kind of stuff too. Thanks for watching

[@dwal2165]

I have a set ordered but only have a 25 horse tractor. I'll see how it does with several wood piles

[@k6outdoors]

Sweet little bolt on attachment, nice work on the demo!

[@aaronvandenberg7550]

Looks versatile and budget friendly. Good demo

[@FlatCreekOutdoors]

Thanks! I appreciate you watching

[@shahpourahmadi1338]

I had some clamp on forks that kept coming off.

[@dmalloy96]

They would be really nice on a skid steer

[@outdoorsinthe608]

Good demo Phil! I have the clamp on forks and they are pretty hard on the bucket👍👍

[@FlatCreekOutdoors]

I used to have bucket forks, and can say they're better than no forks at all! haha! THanks for watching

[@ProductiveRecreation]

Poor man’s grapple is exactly what I was thinking. Or this could be a good way to enhance an old tractor like mine for dealing with brush more conveniently. I hand load it in the bucket and up the loader arms. Something like this would help contain it, and possibly reduce hand loading in some cases. I’d like to see a shoe or something to distribute the pressure where the screws clamp to the bucket.

[@FlatCreekOutdoors]

Good points.

[@Arfonfree]

In watching videos for a bucket mount hitch before buying one, I found one from a guy (wish I could remember his name so I could give him credit) who made a brace. I've got some 1/4"x6" steel, I'm planning on welding a couple up.

[@lfod79]

Anyone have trouble with them clamping down? Mine walk side to side as soon as I start clamping then it lifts up to where the rings on the bucket edge aren't even touching??

[@rodneysweetnam8653]

Hi Phil - it's Big Rodders in Ireland. I'm not qualified to critique this product as I'm not lucky enough to have a compact tractor. My only observation is that the yellow tips appear to be out of the line of sight from the seat due to the top side of the bucket, which may impinge operation. It is unfair to compare it to a grapple if the latter costs 10 times more.

[@Arfonfree]

I WISH I had a grapple! I've been looking at these for exactly these two jobs, and it does look like these are a force multiplier for a small tractor. (Mine is slightly smaller than yours, it's a B9200 [a real man would never admit his is smaller, would he?]). It's not a year later yet, but how is it working out 6 weeks in?

[@dantabler9301]

Dude,,, if you had a wicked grapple from everything attachments you would lose your mind with how much easier getting work done is

[@FlatCreekOutdoors]

Dude, c'mon you can't really compare a $2500 attachment with a $300 one

[@dantabler9301]

@@FlatCreekOutdoors truth for sure, never meant to imply you could. Wish I could send you videos of mine in action. A real time saver.

[@FlatCreekOutdoors]

kzbin.info/www/bejne/raXFnYCEdrqjsMk

[@MaineOutdoorsChannel]

What is the distance between adjacent forks? Looks like it would work for moving firewood that is cut & split to 16" long. For about $300 looks like a good value

[@scottmcd5885]

So... Still enjoying it? We have a little Kubota with a 46" bucket and we're looking for an attachment to use to "stir" the compost pile ..

[@FlatCreekOutdoors]

I actually gave this away to some friends because I don't have much use for it

[@marcwhitney5855]

Hope you got a check with the free product

[@SouthernGround]

that's for a four foot bucket, how come you didn't get the bigger one to fit your bucket?

[@mrfixit391]

Would this fit in a pallet?

[@anthonysoberri4324]

need a little better bucket control and a level rod on your tractor

[@BradMyers]

I don't think you ever stated what the cost of those are? I'm trying to figure if one already has a set of pallet forks and a grapple, would there be a need/purpose for those? I'm not sure where we would use them on our farm. Just thinking out loud.

[@FlatCreekOutdoors]

I'm thinking these are probably more of a low-cost grapple alternative for most folks. They were pretty handy with turning the compost pile.

[@FlatCreekOutdoors]

I think they're a little over $300

[@aaronvandenberg7550]

What is the cost of the grapple in comparison?

[@davidedwards3734]

Great demonstration. Have a Safe Day

[@FlatCreekOutdoors]

@@aaronvandenberg7550 I've seen grapples $1500-$2500, plus the cost of the extra hydraulic controls if you don't already have it on your tractor

[@ulyssesaurelio5503]

A grappling is better faster

[@FlatCreekOutdoors]

yes it would, but this can be had for a small fraction of the cost of a grapple, which might be more appealing to some tractor owners. Thanks for watching!