Рет қаралды 121
In this video, I kick things off by reclaiming some old plywood from the previous ceiling. After sanding it down, I give it a thorough spray, flip it over, and repeat the process. Next, I delve into hanging plywood, insulating, and putting up signs. But the real star of the show is the reclaimed metal-salvaged from a low-slope commercial roof. It’s a 3-inch trapezoid profile, measuring 22.5 inches from flat edge to flat edge. The 3/4-inch shoulders on each side bring it to a perfect 24-inch panel width, ideal for fitting between 24-inch-on-center trusses. Well, almost perfect-there are those pesky edges where it’s not quite 24 inches. But hey, a little creative futzing (technical term!) takes care of that. Now, I’d love to hear your thoughts-quiet versions or speaking with music? Share your feedback in the comments below!