Video detailing the easy way with no special tools to replace the front wheel bearing on a mk7 Ford transit. Works on FWD and RWD applications
Пікірлер: 23
@mrhappy498214 күн бұрын
Another spot on vid .Thank you for sorting my day out 😊 I am sure I will be back cheers.
@Automotiveolie12 күн бұрын
No problem at all! Thanks for taking the time to comment!
@JonDingle7 ай бұрын
That was a useful video young man. Thanks for taking the time to do the video!
@Automotiveolie6 ай бұрын
Not a problem, thanks for you watching and taking the time to comment.
@onemanbanddan7 ай бұрын
yep, did it the same way yesterday. I saw a method where you use 5x M17 bolts and nuts to press the bearing off. tried it. result? 5 knackered M17 bolts. sometimes the grinder is the only way. For anyone watching, the hub nut needs to be tourqued to 420NM which is twice what a big 1/2" tourque wrench can do, so you'll need a Loooong bar. The bearing is known as a pre-loaded casette. Give me a renault 4 please.
@Automotiveolie6 ай бұрын
I’ve seen someone pull the old bearing off with a flat bar behind it but it still took as long as a grinder to do and doesn’t guarantee success! Yes those hub nuts are a pain to get off as much they’re are to get tight enough.
@valiconstantin76214 ай бұрын
@@Automotiveolieeu înainte de a monta bag fuzeta în congelator minim o ora iar înainte de montaj încălzesc rulmentul și întra mai usor
@Vandal-Vlogs6 ай бұрын
I use a 3 ton jack and acro prop, video on my channel its quick and easy.
@Automotiveolie4 ай бұрын
Nice. I’ll check it out
@techscrew22 ай бұрын
You said happy to help here goes! There’s a million and 1 jobs for me to do on mine. Just 1 I need help with. I suspected it was a front passenger side wheel bearing fail approx 5 years ago, had that replaced, but still continued to make a noise, can hear it at very low speeds, like first gear is probably the worst coming from front passenger side, like a noise everytime there’s a revolution. Like a wow-wow-wow-wow-wow. Any ideas? The faster and faster I go it is still there but the noise seems to fade into the background.
@Automotiveolie2 ай бұрын
Hi, ok so is your transit FWD or RWD? The FWD transits have an intermediate bearing on the drive shaft which can give you the noise you’re experiencing. Failing that it could be a faulty bearing, worn brake disc or noisy gearbox. First thing to do is get it jacked up and see if you have any play in the wheel bearing and then the service life of your brakes and keep working back untill you discover the noise! Always here to help so if you need more guidance drop a comment. Cheers 👏
@innocuouspseudonym509Ай бұрын
In my opinion, using a copper/hide hammer AND a bit of wood makes it much harder work; too much shock absorption going on. I often use a club hammer with wood to cushion the blow and haven't broken anything with that set up yet (unless I miss or forget the wood). The copper/hide should tap the bearing on just fine without the wood and won't damage anything in the process. But hey I could be wrong and better safe than sorry. I've hit less sturdy things into place with bare metal hammers and heavy bits of pipe and whatnot, you just need to know the line between impact driving and smashing!
@Magneticvortex-kk4gb6 ай бұрын
helps to put the new bearing in the freezer for a few hours to shrink the metal
@Automotiveolie6 ай бұрын
Yep done that a few times. Usually when I’m doing these bearings the vans need to be in and out of the workshop ASAP so the freezer doesn’t really have enough time
@desireous5 ай бұрын
how do you do this on FWD as there is no stub axle?
@Automotiveolie5 ай бұрын
You use the CV joint to wind it in once bolted to the housing if this makes sense
@weesmokeythe2strokey3522 ай бұрын
Is it the same for a mk6 transit?
@Automotiveolie2 ай бұрын
Yes it should be the same for a transit mk6. 2000-2006. Cheers
@moosa19502 ай бұрын
Thank you, but it would have been better if someone was a little technical and you would have reported it. Because of the hammer in the clear hand، you're so new.
@zaharuddin7616Ай бұрын
part number please...
@AutomotiveolieАй бұрын
1377907 is the Ford part number for the bearing
@pauldelamere5 ай бұрын
That was a great video really enjoyed watching you make that look so easy, can I do the same on my transit connect it’s 13 reg 🤓
@Automotiveolie5 ай бұрын
Cheers. If it uses the same parts the method should be identical 🍻