Transmission Shift Fork Malfunction | P283200 | AskDap

Q - ko4572ko - via Instagram - I got an mk7 1,6 TDI (DSG) and I'm having shift problems...as soon as it wants to shift into the 3rd gear it starts slipping and goes into "safety mode" and only works at the 2nd and 4th gear...diagnostic tools says its a p283200 fault code Shift Fork 'A' Position Circuit Range/Performance but can't find something or anyone that has had the same problem? What does this code mean?
For VW and Audi Parts Shop our site HERE:
shopdap.com/
This video was shot on location:
Deutsche Auto Parts Inc.
10308 Bailey Rd
Suite 417
Cornelius, NC. 28031

[@floydsmith594]

I have a Ford Focus 2014. Will not shift or move at this point. It is a automatic. Mechanic said it was the forks inside the transmission. I also have been looking at how to change the forks. Mechanic quoted me 2500 dollars to fix. I have seen this transmission is a manual trans. with electronic parts on it to make it shift in auto. I also have seen this trans. has had a lot of problems because of this. I was wondering if you could point me in the right direction on this. Can not find a video on how to change the forks in this.

[@Figie24]

What if yu throw a mechatronic unit and it doesn’t fix it entirely I had my evo mr worked for alittle then got same codes again

[@olinadamboy7882]

I have a ford ecosport titanium 2016 At It jerks when accelerating I think its the 2nd gear Because rpm goes to 3200 to shift then jerks first before engagng on the third Is it fork? Or tcm? Ford ecosport is known here to have a faulty transmission Tried scanning but no error

[@sebastianpop4238]

sounsd like it needs a adaptive shift relearn

[@josephfahie8147]

Do I have a bad shift fork or bad speed sensor? I have a 2017 audi Q3 with a 1.4tfsi engine fwd. When cold and reverse is engaged, it it slips into neutral then back into gear and does this over and over until it decides to finally move. It also does this when in drive or going up hill. Sometimes at lower speeds when accelerating I hear a lot of click clack coming from the transmission. Only 10k miles. Vehicle was involved in a front collision

[@HairyBeaver]

Did you ever get this problem fixed mines doing something similar

[@josephfahie8147]

@@HairyBeaver I replaced the mechatronics with a new one. it drives a lot better but im still getting "output speed shaft sensor error" maybe i applied the basic settings incorrectly

[@HairyBeaver]

@@josephfahie8147 getting mine replaced now at the cost of £3200 😭

[@josephfahie8147]

@@HairyBeaver wow that's more than double what I paid for mine of around $1300. I now have Input speed sensor error. Already ordered a new one and hoping that fixes the problem.

[@HairyBeaver]

@@josephfahie8147 I know it’s super expensive here for the part from Volkswagen

[@kristianmopsticc2887]

Nice video

[@oftenwin5390]

I have gtr 35, whem oil in gearbox is dirty, I have this kind of fault, need to clean hydroblock from magnet shavings on solenoid , they look like hedgehogs