Traxxas ERevo 2.0 Reveal

This is the second attempt at the Traxxas E-Revo 2.0. This time we are going at it with a slightly different approach!
Ready Set RC Merch:
my-store-11592078.creator-spr...
Parts installed:
Traxxas 8652 Machined Steel Drive Cups
www.amazon.com/gp/product/B07...
Traxxas 1/10 E-Revo VXL 2.0 GTR Aluminum Shocks & Springs Threaded Body 86086-4
www.ebay.com/itm/383947541018
Traxxas 1/10 E-Revo VXL 2.0 Heavy Duty A-Arms Front & Rear Suspension 86086-4
www.ebay.com/itm/123191978755
RPM R/C Products 80452 Tubular Front Bumper Black: Revo
Traxxas Part 5446G Wing Revo Exo-Carbon finish decal sheet New in package
GPM Racing Aluminum Rear Skid Plate : Traxxas E-Revo VXL 2.0
www.ebay.com/itm/362767025753
NHX 1/8 Twin Cyclone Alum HV Cooling Fans w/Cover 28000 RPM Motor Heatsink Black
www.ebay.com/itm/193863197955
Sweep Road Crusher Belted Pre-Mounted Monster Truck Tires (Blue) C1001BC
www.ebay.com/itm/283757169195
TRAXXAS E-Revo 2.0-ALUMINUM FRONT SKID PLATE - 9PC SET - BLUE
www.ebay.com/itm/283636570840
TRAXXAS Revo, e-Revo, 260+ Piece Stainless Steel Hex Screw Kit
www.ebay.com/itm/322048427852
Traxxas 1/10 Brushless E-revo VXL 2.0 17mm Wheel Hubs Hex Nuts & Pins 86086-4
1/10 BRUSHLESS E-REVO 2.0 VXL BODY shell (BLUE BLACK clipless mounting 86086-4
jennysrc.com/collections/e-re...
1/10 BRUSHLESS E-REVO 2.0 VXL Driveshafts (Set 4) axles steel Traxxas 86086-4
jennysrc.com/collections/e-re...
1/10 BRUSHLESS E-REVO 2.0 VXL KNUCKLES (axle carriers & Bearings Traxxas 86086-4
jennysrc.com/collections/e-re...
1/10 BRUSHLESS E-REVO 2.0 VXL TIE RODS turnbuckle PUSH toe links Traxxas 86086-4
jennysrc.com/collections/e-re...
1/10 BRUSHLESS E-REVO 2.0 VXL WING MOUNTS (Stay) Traxxas 86086-4
jennysrc.com/collections/e-re...
Team Corally KRONOS - MOTOR (Brushless 2050kv C-54055 Kuron 825 C-00172
jennysrc.com/collections/cora...
Epidemic Sound:
www.epidemicsound.com/referra...
#ERevo #Traxxas #GoFast

[@JasonPerrinRCVlogs]

I’m sitting there this morning enjoying my coffee thinking what should I pick up next. I search Erevo 2.0 and both you and Razor RC have new videos on the 2.0 up. :). Now I feel left out, lol. Truck looks great man.

[@ReadySetRC]

@Jason Perrin R/C Thanks man! Jump in😜 When I saw Razors video I was just finishing up the editing on this video, I was like the stars are aligned, lol.

[@GreatLakesRC]

Dam that looks really slick!! Used Traxxas is the only way to go. I did the exact same thing with my Xmaxx. Got it used, tore it all down and replaced what was worn out. Jenny's RC is a life saver! I have bought tons of parts from them over the years. Excited to see this street machine!!

[@ReadySetRC]

@Great Lakes RC Thanks man! Got to agree. I bought my XMaxx used too. Just got to know what you are getting into. That DBXLe 2.0 bash has me wanting to bring mine out😊 Great vid!

[@GreatLakesRC]

@@ReadySetRC Thanks, I appreciate that! Would love to see yours out and bashing again 👍 Weather is about to shut us down though. Cold and rain is all I see in my forecast for weeks on end...

[@robertlongley9153]

This is a beautiful looking EREVO the rims and tires over the top. Really good video. Definitely not for the beginner that for sure. Love both my EREVO 1.0 and 2.0. Can’t wait to see you running video

[@ReadySetRC]

@Robert Longley Hey Riff! No questions one of those projects I wanted to get all the parts in before starting. Wanted to do it right especially after owning one before. Now if this weather would cooperate for me to get a run in😆

[@RCRoads]

Awesome build. You totally went through your ERevo and turned it into an incredible RC. Very impressive!

[@ReadySetRC]

@RCRoads Thank you!

[@LVC_RC]

Super clean build! Turned out great. Love to see some life brought back into a used truck. Makes me miss my old E-Revo 2.0 a bit. 😅 Great video.

[@ReadySetRC]

@LVC RC Thanks Garrett! I didn't know you sold your E-Revo 2.0?! Thought you would never part with that one😥

[@LVC_RC]

@@ReadySetRC My Kraton V5 actually took its place one year ago. I still loved the truck, but it was extremely worn. It would’ve taken quite a bit of money and effort to get it back in good shape, so I sold it and gave the Kraton a shot to start fresh. 👍

[@kaosr.c]

Love e revos , had 1 for a year and had to buy another , 2 is always best ... and Jennys Rc is amazing ... great build on yours too , love it

[@ReadySetRC]

@Justin Thank you, much appreciated! Jenny's for the win for sure👍

[@MrGdbsti05]

not sure how or what has given me the inspiration to look at my e revo again. now im going to go all out and v2 it soon hopefully it turns out close to yours.

[@ReadySetRC]

@MrGdbsti05 The ERevo has that effect on us😆

[@championcarcare8207]

Awesome build my guy👍🏾🤛🏽 you nailed it

[@ReadySetRC]

@Champion CAR CARE Thank you! I'm glad you enjoyed it👍👍

[@choke666]

Those projects are the best! I completely overhauled my Rustler 1st, then my Xmaxx, 1/16 Revo, and lastly my DHK Maximus. All at different times. Nothing like dumping out a huge pile of parts that you upgraded in 1 fell swoop! VERY NICE REVO MAN! Despite their lack of durability, I've always thought they were a kickass design. And NEEEED to get one!

[@ReadySetRC]

@BADGER So true, something about a teardown. The Revo is just one of those trucks. My last one was like a boat owner. I liked it the first day I got it and then when I sold it😆 I think this one is going to be different though.

[@choke666]

@@ReadySetRC HAHAHAHHA! Right?! Well, i hope so. That's funny tho, i have definitely done the same thing. You will have to keep us informed on that for sure!

[@theirishaxe9405]

If you put a rpm true track kit on the rear and the durability goes way up no more rear links no more rear turning hubs. All you have to do is drill out the rpm hub a couple mm for the erevo 2.0 bigger bearing then everything fits perfect!

[@brianbrissette9444]

What a looker, diggin the blue theme 💙 BB

[@ReadySetRC]

@Brian Brissette Thank you👍

[@jdpasltrains]

Shiny wheels are very nice. Thumb up.

[@ReadySetRC]

@jdpasl They set it off just right👍

[@drewgoody2957]

Damn bro that came out sick as hell love the color scheme

[@ReadySetRC]

@Drew Goody Thanks man!

[@Sk.2500]

Where did you get the limiting straps on the back from?

[@ReadySetRC]

@Sk'2500 These were inherited when I bought the truck used. They are Hot Racing limit straps.

[@MetzRc84]

Wow that things a monster!

[@ReadySetRC]

@Metz Rc Thanks man💪

[@riffraffsrc]

Fantastic job brother! Looks beautiful man! Great video as always my friend! 🤜🤛🔥🔥⚡⚡💯

[@ReadySetRC]

@Riff Raff's RC Thanks Riff! Took my time with this one. Wanted to come out just right👌

[@lawrenceroe8961]

Beautiful build brother

[@ReadySetRC]

@Larry Roe III Thank man! Took my time with this.

[@anything-goes6941]

Those are GPM skids man RPM doesn’t make aluminum parts. It looks pretty good though, I’m still working on mine, just waiting on the parts to come in, for 2.0 and a new tekno sct410.3. Have a whole week of shipments coming in.

[@ReadySetRC]

@Anything-goes Think you maybe mistaken my friend. I was speaking of the RPM front bumper. I did not reference the skids until 11:58 section and I did not call them by name but all parts are listed in the description. Good luck on the builds. It's like Christmas everyday with parts coming in😊

[@Ohwell423]

Beautiful

[@ReadySetRC]

@dylan haney Thanks👍

[@CoachD386]

🔥🔥 good stuff fam

[@ReadySetRC]

@CoachD RC Thank you fam🤜🤛

[@championcarcare8207]

Where did you get your rims and tires

[@ReadySetRC]

@Champion CAR CARE Purchased from ebay. www.ebay.com/itm/283757169195 I have all parts used in the description also.

[@Intrinto]

The metal skid plate on the front and rear is Not a good idea ! It will not flex on impact, what it will do break off stripping or breaking the bulkhead! I know made that mistake.. . The tie rods are a good idea to upgrade. Also I went with aluminium top A arms all around , and plastic RPM A arms on bottom, the center skidpad is a good idea to go aluminium but keep in mind how heavy your making the truck. I would also advise aluminium shock caps . And GMP or HotRacing driveshaft all around, the dog bones pop out and tend to eat notches into the cups. The traxxas wheelie bar will break easy! Go with a single servo setup and save a few OZ's use a high torque servo. Also you can make the car easier to control on the throttle if you remove a some of the 20Mill did fluid it has stock and replace what you took out with 500K. Just dont remove more than 25% of the 20Mill . That way it will diff out a little but still bark wheelies on command. Also the ESC, swap the stock one out with a hobbywing max6 . You will get allot more punch! And less chance of blowing out the stock esc under heavy loads . Hope this helps . Great video , the E Revo 2.0 is my favorite rc by far..

[@ReadySetRC]

@NOX Thanks for the tips much appreciated. This is actually my second tour with the E-Revo 2.0. This is a purpose built on-road street basher. I got way too many off-road trucks and since this my second time owning one I always wanted to build an E-Revo to street rip. Always love seeing folks bash the snot out of this but for me I got something else in mind😊

[@Intrinto]

@@ReadySetRC did a great job no doubt about it! Just careful with curbs. That front skid plate can give you a headache. Lol Also for street, I would also suggest axle extensions. Makes it a good bit more stable when you hookup as you turn. I am currently building a new 2.0 myself and love to see what other people are doing . :) So question, how do you like the 2250 motor ? I went and got another 2200kv but was considering switching to a different one. I'm going to be setting mine up for FPV . In your gearbox, you can also use powdered graphite or ceramic , just dont get water in there. That will reduce the drag That platform is by far my favorite to play with. I dropped around 5k on my last one, made some $$$ mistakes to .lol. However Love the way you got yours looking and the set up so far very intrested to see what else you may do with it. Those wheels are exactly what I am looking for. For added bling,, LEDs will make it POP. I would suggest adding a extra small battery for those if you do go that route. I also did the carbon fiber wing on my last one, but I was kinda pissed when it started flaking off so easily. I may make a video for this one I am working on once I get a few more parts in.

[@ReadySetRC]

@@Intrinto I was having some issues with the receiver on the first few runs so I didn't get all the motor was able to give out. Your setup sounds killer. Let me know when you post something up. I'd love to see that running.

[@erickchambers11]

where did you get the wheels

[@ReadySetRC]

@Edubb Chi They are SRC Road Crushers. Here's the link to Amain but they can be found on eBay and a few other locations. www.amainhobbies.com/sweep-road-crusher-belted-premounted-monster-truck-tires-blue-2-swp-srcc1001bc/p1056434

[@Aro800]

Thanks great video, where do you get the shock cover from?

[@ReadySetRC]

@Aro800 These where part of a kit I bought for my Traxxas Rally dust cover. Came as a set with the Dusty Motors shroud. But they are all over Amazon and Ebay. Just need to put in RC shock dust covers. Most cases you need to cut them down to size.

[@Aro800]

@@ReadySetRC Thanks mate. Much appreciated.👍🇦🇺

[@bobhartwell3262]

I like it.

[@ReadySetRC]

@Bob Hartwell Thank you!

[@theirishaxe9405]

I just rebuilt a 2.0 also. Put a true track rear end kit on it so no more rear links to break also👍

[@ReadySetRC]

@THEIRISHAXE Got to agree once you take care of that rear end it is a nice truck👍👍

[@simplyputsmu]

What tires r those

[@ReadySetRC]

@Michael Houchen Got them listed in the description. Link may not be available anymore though.

[@sadmancho]

Do you have a link to the sway bars or a video on how to install them? Thanks great video.

[@ReadySetRC]

Sadman Chowdhury www.amazon.com/Traxxas-5498-Sway-Bar-Kit/dp/B000XQ3G84/ref=sr_1_1?crid=1I2JS6HZMLBLM&dchild=1&keywords=traxxas+erevo+sway+bars&qid=1635902156&sprefix=traxxas+erevo+swaybars%2Caps%2C53&sr=8-1

[@sadmancho]

@@ReadySetRC thanks for the link but how did you manage to install it?

[@ReadySetRC]

@@sadmancho It's straight forward from the instructions Traxxas provides. The second time I did it I don't think I even used the instructions😊 I did find the following video from @RCInMotion. It's pretty good. Hope this helps kzbin.info/www/bejne/oJzMgpaaYtl_hK8

[@sadmancho]

@@ReadySetRC thanks for the info.

[@johnmiller4553]

LOVE THISE WHEELS 🤙🤙🤙🤙🤙🤙🤙

[@ReadySetRC]

@John Miller Like it was made for this👌

[@joseCalderon1976]

Seems to be a good basher except for those rear links breaking all the time? I don't have one, but my friend does. I have like 14 rc vehicles so I'm good 🤣😅👍. Good project.

[@ReadySetRC]

@Rc enthusiast. Thank you! That was the reason I sold the first one. Trying something totally different this time around😊

[@silly_d_williams2167]

Always wanted to try one of these... But the durability issues kept me from paying 650 to ever try it... 🤷🏾‍♂️

[@ReadySetRC]

@Holding On To Letting Go Yeah man those rear push rods is what got me to sell the first one. After ripping the Arrma Nero Fazon for the past year, wanted the ERevo back to set it up the same way, on-road bashing with light off-roading.

[@caseyernstmusic5748]

He said there were random screws and then freeze frame image of the differential cups. ? What? I am liking the fans. Also. Stock steel drive shaft? ...... plastic....

[@ReadySetRC]

@casey ernst music If he you mean me, no need to talk in the third person😆 I answer my comments. Some times when you have b roll you don't have every part of the video catalogue. I don't read a script so in post hard to capture the things I spoke about in a video that I did not catalogue. I'm speaking of the center drive shaft which in the stock form is plastic or composite. There is an upgraded steel drive shaft but I opt not to get it.

[@caseyernstmusic5748]

@@ReadySetRC ya I understand. Much praise for the build. Going through similar struggles breaking in my new e revo

[@caseyernstmusic5748]

I snapped my one drive shaft and had to upgrade after my stock esc failed

[@ReadySetRC]

@@caseyernstmusic5748 Thanks man! Yeah it's one of those trucks. This is my second go at it. I'm coming at it with a different mind set.

[@ReadySetRC]

@@caseyernstmusic5748 My first one never had an issue with the ESC but this one is failing on me. Cut's out after 3 minutes in the run. Not overheating but just cuts out. I think it was failing on the previous owner but never told me that info😊 I'm ripping it out and putting the Team Corally ESC in.

[@gaincarlodibattista8493]

Do you ship parts ?

[@ReadySetRC]

@gaincarlo DiBattista I'm a hobbyist, like yourself.

[@redblue40rc33]

Top speed?

[@ReadySetRC]

@Red Blue40RC Haven't done a speed test. Since this was a used RC with in need of a lot of attention, I've been doing a lot of test and tuning.

[@RonaldBelford71]

🤤

[@ReadySetRC]

@RonaldBelford71 Me too😆

[@RonaldBelford71]

@@ReadySetRC i just got back into rc after many many years. Tmaxx was my last around 1999. In last three weeks bought xmaxx, e-revo, 1/16 e-revo, xo-1, a dji mini 3 a yuneec typhoon h, dji goggles and cameras to set up fpv. 😂 Funny how it happened. I just realized the weather will get bad and then ill clean up and modify for fun ghis winter. Most likely will do everything i can to the e-revo. Its my favorite in ways, but each one has its own thing. The x0-1 really surprised me how much i like it. I woulda never thought of getting a road car, but dang its fun, wow!

[@ReadySetRC]

@@RonaldBelford71 Yeah it works out like that 😊 You got a nice collection there.

[@macmccartney5760]

Thought the original driveshaft was plastic

[@ReadySetRC]

@macmccartney5760 Yup it did. So much parts was replaced hard to keep track of everything😆

[@1994RALLY]

Can you put a 2.0 body on a 1/10

[@ReadySetRC]

@Murray Garage Not sure I understand the question. Will it fit the version 1, yes. You8 will need to do some mods to the body, drill holes or adapt the mounting system from the 2.0.

[@1994RALLY]

@@ReadySetRC Thanks man I figured it out Traxxas sells mounts for it so you can swap the 2.0 body on the old version 🤙

[@jayputters615]

Now its a street queen im a mud basher jumping flipping extreme basher this build is for weenies

[@ReadySetRC]

@Jay Putters I guess I'm queen of the weenies😆🤣

[@bluddywulf6796]

👍666 views

[@ReadySetRC]

@Erek Reyes And growing😊