I'm gonna try one of these servos out. They are cheap for sure. I bought metal gears for my rustler and its been fine since, but for the money, I could have got the whole servo that you use. Good job! Good video.
@fullthrottleobsessions3 жыл бұрын
Right on brother thank you, these servos have held up great for me the last couple of years. I always have too problems with the stock ones they either strip or stop working completely like the international boards go bad
@doubleaaaron3 жыл бұрын
@@fullthrottleobsessions I stripped my rustler vxl's in less than 10 minutes on the fist run. Then I replaced the plastic gears and I'd happened again. So I said no way, and got the metal gears. I've had more trouble out of the rustler than any car I have. I think its sorted now, but sheesh, it's been a headache.
@fullthrottleobsessions3 жыл бұрын
Iv been there man for me it was my udr iv had nothing but trouble with it until recently I'm hoping I have everything sorted on it now but it wasn't cheap lol
@maverickpierce30903 жыл бұрын
dunno if you guys gives a shit but if you're stoned like me atm you can stream all the latest movies and series on Instaflixxer. Have been binge watching with my brother these days =)
@ishaanjayce13683 жыл бұрын
@Maverick Pierce Definitely, I have been using instaflixxer for since november myself :D
@degrappenmakers69333 жыл бұрын
Thank you for this video, I have bought one since you speak so positive about it, I also have bad luck with the original 2075 traxxas servo! My servo will be delivered in 2 days I am excited to find out how it performs
@fullthrottleobsessions3 жыл бұрын
Right on brother I'm sure you'll love this servo iv had nothing but good luck with them
@degrappenmakers69333 жыл бұрын
@@fullthrottleobsessions you’re right I love it man
@bcumike2 жыл бұрын
Was hoping for a demo of performance tbh:/ Just a left right on some concrete in the future atleast. It would add some value;)
@fullthrottleobsessions2 жыл бұрын
I hear you man, I'll keep that in mind for a future video
@DeRock4013 жыл бұрын
Thanks for this. I just bought a new servo and installed it but couldn’t get the damn front bulkhead on
@fullthrottleobsessions3 жыл бұрын
Right on brother, did you go with this servo or another kind? Did you end up getting the bulkhead on?
@DeRock4013 жыл бұрын
@@fullthrottleobsessions I figured it out lol. And I went with a savox 1212sg
@dmkorba10 ай бұрын
Nice informative video, thanks. BTW what type shocks are those?
@fullthrottleobsessions9 ай бұрын
Thanks brother, these we're some eBay specials I picked up a few years back
@kbwolf83383 жыл бұрын
Great video
@fullthrottleobsessions3 жыл бұрын
Right on thanks brother
@SweetTooth105 ай бұрын
WTF! I changed my servo and now my gyro doesn’t work correctly and my steering is reversed.
@backyardrc96533 жыл бұрын
I want to replace the servo on the Traxxas rustler 4 by 4 but the two screws on the front are stripped what should I do the two screws closer to the back of the car are stripped
@fullthrottleobsessions3 жыл бұрын
Oops that dose happen brother and always make things a little interesting, it really would depend on how bad there stripped sometimes you can take a star wrench/socket and bite to unscrew them if there's something to grab but if not you'll have to find a small easy out to get them out
@ar12. Жыл бұрын
I was bashing today and doing some jumping then the steering went near fully I’m sure the gear is broken but I might just replace it fully as currently it’s the weakest part of my upgraded rustler do you know any good servos to get in Australia for the rustler.
@fullthrottleobsessions Жыл бұрын
Ouch I definitely been there many times the factory servos never hold for me its either the gears or the boards iv had quite a few just stop working all together like the boards go bad or something. Iv had great luck with these 25kg servos in my RCs I'm really not sure if you can get them out there but here's a link if you'd like to check them out amzn.to/3rDCGsW
@ar12. Жыл бұрын
@@fullthrottleobsessions yeah it looks like I can ship them in better priced then the 80$ I was going to pay for 1 at a hobby shop. what steering servo do you recommend for the xmaxx aswell, as I’m getting one soon and I’ve heard the steering breaks easily on them so having parts is always good to keep bashing when you don’t have a local hobby shop.
@fullthrottleobsessions Жыл бұрын
@@ar12. I hear yah i like to keep spare parts around aswell. I'm honestly not to sure on an xmaxx servo I haven't had to replace my stock one, iv replace the steering arms just not the servo itself yet
@drbluexd30823 жыл бұрын
Does it still hold up?
@fullthrottleobsessions3 жыл бұрын
This truck holds up pretty good in my opinion man, these servos hold up great i have been running them in a few of my trucks for quite some time now with no issues
@drbluexd30823 жыл бұрын
@@fullthrottleobsessions ok thanks imma buy them
@maszkalman367610 ай бұрын
Yeah that's a valid question for chinese servos i had a ds 3218 pro and i worked for a year now it's jittering and barely turn back to center even under the car's weight stading still at high speeds the car is all over the palce and the tsm don't really work with it.. the car can't back up and the tsm overcorrects the turns with this servo and send the car flying off the road...
@drbluexd308210 ай бұрын
@@maszkalman3676 Ah okay i bought a different servo and it still holds up after 1,5 years
@maszkalman367610 ай бұрын
@@drbluexd3082 Good for you i hope it will lasts for you even more!!! 🤜🤛 As i searched the "budget" servos the better ones around 90$ and up so i will turn back to traxxas their best 2255 servos is fast and 440 ounces/inch just 5 bucks more and i can safely use my tsm again... without the car running of the road :D