Traxxas Slash 4x4 VXL Brushless - FIRST TEST of The BRAND NEW Proline BADLAND TIRES!!

In this video I test out the brand new Proline Badlands mounted on Raid wheels on my Traxxas Slash 4x4
Amazon Affiliate Links -
Traxxas Slash 4x4 VXL Brushless RTR with Fox Shox Body -
www.amazon.com...
Traxxas Slash 4x4 VXL Brushless RTR with Orange / Blue Painted Body -
www.amazon.com...
Traxxas Slash 4x4 VXL Brushless RTR with "Vision Wheels" licensed Body -
www.amazon.com...
Traxxas Slash 4x4 Ultimate RTR (Green/Blue) -
www.amazon.com...

[@ancillary9683]

Nice video. I just bought the Traxxas Slash 2wd so this series is very helpful.

[@RCKnockout]

Glad you find it helpful!

[@joemode101]

You should try the clip less body mounts. I just put it on mine they work awesome a lot better.

[@RCKnockout]

Is it made by Traxxas?

[@theLyzhendricks]

I just got a set of badlands for my slash with Christmas money I also got a fcx24 powewagon made by fms and I got all metal suspension I can't wait for it to all show up in in mail

[@RCKnockout]

Nice man! Sounds awesome!

[@gourobkundu2173]

My friend has those tyres. They work great for him.

[@RCKnockout]

They’re awesome tires when it comes to grip!!

[@av_rob79]

Sweet tires I recently got the mt version for my older stampede vxl and they rock

[@RCKnockout]

Nice man! I’m sure they’re way better than the stock tires!

[@christopherrice1375]

The Badlands Tires are awesome and I like that you can replace the center hex part without having to replace the entire wheel. Were you running on 3S and what motor are you running?

[@RCKnockout]

Yes 3S. 3665 Surpass Hobby motor

[@alexnava7664]

Always lock tight it..lol it happend it to me as well

[@RCKnockout]

I know right lol 😂

[@alexnava7664]

I beg a differ...a slash with brand new street fighters a low to the ground....now thats a look..lol good vid yeah looks good

[@RCKnockout]

Thanks!

[@torencarroll7851]

Dude.

[@_savageasfck_]

Are the Streetfighters belted?

[@griffynpodlatis8633]

I can't even drive my slash, it's fun in all but every time I drive the part numbers fly, and those part numbers are for the driveshaft's. And I've tryed every brand of driveshaft all with fail.

[@RCKnockout]

Bummer man

[@cbluben7]

Same here especially if you up a tire size. I say the hardened steel shaft from ebay last the longest

[@RCKnockout]

@@cbluben7 for sure! I haven’t had any issues with mine so far

[@ceementality]

xo-1 driveshafts maybe

[@brandonmiller318]

Try making your steering angle less with endpoint.

[@gamercat7004]

I just got these wheels today they grip on corners and I have the vxl 3s slash and it's 2wd version. I need the front ones to turn better😆

[@RCKnockout]

You just have the Badlands on the rear?

[@gamercat7004]

@@RCKnockout yes i do😄

[@RCKnockout]

@@gamercat7004 yeah you need to get some for the front too

[@gamercat7004]

@@RCKnockout I notice the way it oversteer wide when turning a hard left and right. I just stopped driving my slash like 2 minutes ago.

[@RCKnockout]

@@gamercat7004 so the front aren’t gripping?

[@NathanStorer-RC]

Those badlands look bad @$$, but it's too bad you keep stripping the hex! You losing the rear body clips just gave me an idea... With your project 100mph slash, what if you took off the rear clips? Think that would help release the air pressure, allowing you to go faster without parachuting the vehicle?

[@RCKnockout]

Nope pretty sure that would make it worse actually lol 😂

[@Qsfd142]

Tires blew on my slash Vxl 2wd running gens ace 3s 5200mah (23/86) in a week will these tires last well on pavement also, how is the ballooning?? Might stick to 2s or lower the spur a bit.

[@RCKnockout]

Pavement will wear these tires pretty fast….they do have really good traction….they don’t balloon too bad either

[@TE-ni7em]

What esc motor combo and pinion you running it rips

[@RCKnockout]

It’s the Vxl3s esc and a cheap 3500 Surpass Hobby Brushless Motor…..I believe the gearing is 15t pinion and 54t spur gear

[@dackoson27]

I am gonna buy new tires for my slash because they say the original ones are not the best for grip

[@RCKnockout]

You’re correct they’re not

[@ajk2392]

I have a slash 2wd vxl and have blown out 2 pairs of tires already in like 3 weeks. Are these gonna do the same thing?

[@RCKnockout]

They might…..you might wanna go with belted tires

[@ajk2392]

@@RCKnockout which ones?

[@RCKnockout]

@@ajk2392 I’ve never actually run belted on mine…..pretty sure proline makes some belted ones though

[@jozy5154]

Would they fit on the slash ultimate?

[@RCKnockout]

Yeah they will

[@jozy5154]

@@RCKnockouthow’s the glue? I don’t have to order anything else for them to fit?

[@jozy5154]

Stock tires blow out quick

[@RCKnockout]

@@jozy5154 yeah they wear pretty fast too

[@samcourtrc6767]

Love this bro they look good bro and it go’s well

[@RCKnockout]

Thanks man! 😉

[@tsi5729]

How big are they

[@RCKnockout]

They’re 2.2s

[@Cowelly84]

What model of Badlands are they?

[@RCKnockout]

Proline is the Brand… Badlands is the model…these are 2.2 sc tires

[@Cowelly84]

Thanks, I just wanted to make sure the wheels i bought fit my slash 😁👌

[@RCKnockout]

@@Cowelly84 yeah they should fit if you bought the 2.2 short course ones

[@petersonfake4917]

@@RCKnockout hi , are these the same size as the original tires the slash came with? Thanks

[@RCKnockout]

@@petersonfake4917 yeah basically the same size

[@haroldrockhill5631]

Part number?

[@RCKnockout]

www.ebay.com/itm/392877668384