TRAXXAS SLEDGE FIRST IMPRESSIONS, Gearing, tweaks, and Hop-ups...

What can I say people. Held out a bit for a solid mount design, but I'm digging her so far. Turning is lackluster with the stock servo, but a Power HD 23kg should take care of that. This truck is boring out of the box in my opinion, but it's clearly got loads of potential. Wanted to run her the entire evening session, but, as I later discovered, my receiver wires wiggled loose as the sun was setting. The Talion 6s stepped in nicely. Huge thanks to M2C Racing, Fast Track Hobbies in Rocklin, CA, and my buddies John, Shelby, Ian, and Victor for another great time!!!

[@richduperbash2966]

Huge shout out to my bash Brothers for an Epic fun evening session 😱. Wanted to run the Sledge more, but had several power cuts and realized later my reciever plugs had come loose 😂 (the only thing I didn't check of course). The Talion 6s stepped in nicely. Don't run 16/46 gearing for long with the stock Sledgehammers 🥵. Grateful I didn't cook my motor. Truck did Killer with the smaller Backflip LP's 😍. Excited to do more tuning with her.

[@rogueFactor]

ohmg, crackin' HAHA 😂😂💀 "Obviously anytime with an RTR you never know who put the damn thing together."

[@Shaunusprowire1748]

Rich u always fly like a bird like for day's 😂, got my bk flips for the X maxx now waiting on m2c stub axle for the widened axles m2c 😁😭😂🍻💪👍✌️

[@richduperbash2966]

@@Shaunusprowire1748 thanks Brother 🤗. You're gonna love the wider axels 😍. Looking forward to getting Green Bertha back out again 🚀🚀

[@terrypeterson9783]

Rich,8 hundo 1/8 scale Rtr stands too reason it takes a beat down! However 20million in the center diff stock shoes balloonin, begs the question why 20 million? Humor me please. Need a little more knowledge before I throw down 8 lrg.

[@rogueFactor]

@@terrypeterson9783 for traction

[@rcdriver]

Well that was an awesome bash. Great video!

[@richduperbash2966]

Thanks so much Brother 😜!!! Excited to get her dialed and back out again soon. 🍻😎💪👊👊

[@averylooper5534]

Another epic bash! So glad you're on board with the sledge now! She really took a flogging! Thanks for punishing the parts

[@richduperbash2966]

Thanks so much Avery 😜!!! So stoked about the mount, hexes, and 7075 T6 chassis 😱. Looks absolutely gorgeous. You and Mitch are turning the Sledge into a virtual tank. 🍻🚀🚀😎💪👊👊

[@granddeath]

The MM isnt out yet?

[@mikebultema2536]

Rich I’m very glad that guys like you and Eric(rcdude81) are in this hobby. The way you both push the extremes of these rcs allows us to benefit with better products. Thanks.

[@richduperbash2966]

Thanks so much Mike 🤗. It's a true honor to recommend, test, and help refine parts for M2C 😍. Having a diverse group of guys with different insights and backgrounds helps. We're all passionate about the hobby. Truly appreciate it Brother 🍻😎💪👊👊

[@cmcconn100]

I just ordered a Sledge. This is the first adult RC car I've purchased. It looks like a lot of fun and fairly durable. I probably won't hack it until I need to or get bored.

[@Captinfun101]

Doesn’t matter what rig you have you certainly give it the Duperbash twist of awesomeness. Nice job.

[@richduperbash2966]

Thanks so much Lucas 😜. Wrenching, tuning, and modifying is my favorite part of the hobby 😍. Bashing is just the cherry on top. Really appreciate it Brother. 😎💪👊👊

[@Captinfun101]

@@richduperbash2966 I could watch you air out your rigs all day . Hope to get to that level one day , one yr 😂 you also seem so courteous and positive to your bash mates . Inspiring to say the least.

[@ervinmedina9014]

I was wondering if you were gonna pick up a Sludge 😜👍 Nice break in session. Changing to to the smaller backflips was a great idea, took some weight off. M2C to the rescue to help the Sludge. After you dial it in we can change the name 😆😜👊 The Rips at sunset with the Talion we're off the Hook Rich!! As Always stay safe Bro and bash on from Colorado!!!

[@RCPropaganda]

Just ordered the Hex's and nuts. I am waiting for the motor mount to come out for sure. I will probably go with the chassis at some point to.

[@lukerecore]

Great bash sesh Rich, I've been watching u for a long time now and my jaw still drops seeing how BIG u send these rc'z. 🤪🤟😎

[@richduperbash2966]

Thanks so very much Luke 🤗. Happy bashing Brother 🍻😎💪👊👊

[@MRMechanicRC]

Dude that thing is a MONSTER with that gearing 🤙 can’t believe after all the bragging Traxxas did about making the perfect solution to the arrma kraton and then it had so many issues. They’d have to send me one so I could see lol, but from what I can see people are still better off with buying an arrma and using the M2C goodies. Definitely SHREDS though.

[@RCboyzTV]

Rich, You were tentative at first but I knew you wouldn't be able to hold out much longer!! Glad you got a Sledge and I'm excited to see more epic bashes with this truck and Bertha! Thanks bro

[@richduperbash2966]

Thanks Jonathan 🤗. Once the prototype M2C mount was designed, my biggest concern was squashed 👊. Mitch and Avery will make this truck a virtual Tank 😱

[@NelsRc73]

Great bash actions as always! This Sledge received a nice beating! The end is great with the sunset, thank you Rich for sharing, enjoy!

[@richduperbash2966]

Thanks so much Nel 😜. Had a Blast with her maiden voyage 😍. Hopefully get her back out again soon. 🍻

[@dayweed4268]

Enjoyable to sit back and watch!

[@alistairclark6814]

Your videos have the hugest airs and the least breakage. Very impressive driving!

[@richduperbash2966]

Thanks so much Brother 😜!!!! Truly appreciate the kind words my friend. 🍻😎💪👊👊

[@3940albert]

DEWALT makes a little 20 vote compact below her that will cool that Down in 2 minutes and you can run it back the Battery last for a minute on the blower so you can keep cooling it down back-to-back

[@mattrox1221]

Do you have a link for the “1/4 inch felt”? Awesome first bash sesh. Thanks for going over the truck and sharing your modifications. I’m not enjoying the stock batter tray system and like the idea of providing some padding for the batteries.

[@richduperbash2966]

Thanks Brother 👊. Here's the felt I use. It's self adhesive and easy to cut with sharp scissors. I also use it on inner body areas on certain rigs to cushion from shock cap impact points...etc... www.walmart.com/ip/Super-Sliders-3-1-2-x-6-Rectangle-Self-Stick-Felt-Pad-for-Hardwood-Brown-2-Pack/16782117

[@chadbiermann3380]

I enjoy watching every video you put out!! Always fun to watch!! Your always seemingly having so much fun!!! 😀😀😀 You and the group of bashers you meet up with are all such good drivers!! Skills for days!! 💯💯😉 Great first bash with your new sledge!!!

[@richduperbash2966]

Thanks so very much Chad 🤗. Definitely try to have a much fun as possible out there. So grateful for the laughs and stress relief this hobby provides. Even the quiet peace of wrenching, modding, and tuning in the garage 😍. Hats off to my buddies for making these group sessions such a Blast!!! 😎💪👊👊

[@TpPartsRcXtreme]

Looks like it was born in your hands brother Rich!!❤ All car have flaws, this one will be as epic as all other M2Cified cars on the market. As a RTR, they nailed it, with a bit of a tweak from m2c, this is the rig❤. Awsm sends Rich, 🥰 The hammers are one of my Favorite tires.

[@richduperbash2966]

Thanks so very much dear Brother Thomas 😍. You were right about the car once again 🤗. With the motor mount issue resolved (and different wheel options) M2C is slowly building a Tank 😱. Stance feels perfect with the hexes. Definitely liking her overall and see heaps of potential 🚀🚀. Excited to do more tuning. Truly appreciate it my dear friend 🤗👍👍😎💪👊👊

[@readeracingRC]

Awesome Bash as usual . Your the first channel I check for a new vids. Ill never get as good of a driver as you, but I keep trying. lol consequently i do break a lot more then most. but keep trying. I do have decades of racing MX which is a help. Thanks for all your dedication to this sport. keep up the awesome work.

[@richduperbash2966]

Thanks so much Brother 😜!!!! I also grew up in BMX and MX 😍🚀🚀. It definitely helps understanding traction, wheelspin, and overall dirt mechanics and air control. 🍻😎💪👊👊

[@kelleycook4753]

So tired of my Traxxas Maxx V2 gear mesh failing. I bought a new Gear cover and it did the exact same thing in one day. I used a Riv Nut gun with a 4mm riv nut in the mesh hole for the plastic gear cover and a very short screw that locks into the aluminium threads now instead of plastic... with a rubber o ring to stop it from coming loose... so far so good.

[@richduperbash2966]

Thanks so much for the detailed comment Kelley 👊. This was a poor design unfortunately. Makes no sense to keep going through stripped gear covers. You're solution has worked great for others too 😉. Appreciate you sharing Brother. 😎💪👊👊

[@thunderrc]

Awesome smack down with the Sledge Bro! My motor got screaming hot the other day as well 🤣🤣🔥🔥🔥I’m loving the set up with the M2C motor mount and just got the new chassis! Can’t wait to see what the Sledge can do once Mitch and Avery perfect it! Keep slaying it out there brothA! 🔥🔥🔥🔥🔥⚡️

[@richduperbash2966]

Thanks so much Brother Rocky 😜!!! I'm grateful I didn't cook that sucker 😂. The tall gearing plus powdery dry dirt and wheel slip is a recipe for spiking temps. Loving the mount and prototype chassis 😱🥰🥰. Can't wait to get a hard test on it. So stoked Mitch and Avery are all over this platform. Really appreciate it Brother. 🍻😎💪👊👊

[@BarstoneRC]

Man the sledge was ripping pretty good buddy and those launches on the mega ramp we’re just killer great bash with the sledge buddy

[@richduperbash2966]

Thanks so much Brother David 😜!!!! Great to see you on the group call the other day 😱. I'm digging the truck Bro. She felt Killer with the Backflip LP's. Same for the Talion of course 😍. Excited to do some fine tuning and get her dialed. Huge thanks to M2C for making her right with the awesome upgrades!!!! 🚀🚀😎💪👊👊

[@humblebeast7232]

Great bash session brother🔥🔥🔥🚀🔥🚀🔥🤙👍👍💪😎always a pleasure to watch you do your thing with whatever rig🙌 bash on brother!

[@richduperbash2966]

Thanks so much Brother 😜. Had a Blast getting to know this new rig. Excited to get her dialed in tight. 🍻

[@madmatt2769]

Awesome bash👍🏻digging the air control💯👊🏻👊🏻👊🏻

[@jacobhenson3952]

I have to say I love the Sledge and have not had any trouble with the gears but I can’t wait till this mount comes out. I love your videos this was awesome.

[@rcsmith5909]

Great vid and bash brother. Glad you grabed this truck.

[@DrunkinPunch]

Epic as always! Sledge doing it well but interesting to see how you change things for sure. Talion at the end though 👌🏻 Looked awesome with the evening lighting in the background!

[@richduperbash2966]

Thanks so much Scott 🤗. The Sledge has serious potential with the right set-up and upgrades. I didn't want to bother with the stock motor mount as my buddies had already blown through spur gears with all the inherent flex 😝. The spur gear is designed not hardened steel. LOVE me some V3 M2C Talion 😍🥰🥰. Hats off to my buddies for an epic evening run with a beautiful sunset. 🍻😎💪👊👊

[@htx_rc4256]

Awesome bash with the sledge!! I can’t wait for that motor mount to be available! Wish there was a spot like that in houston

[@richduperbash2966]

Thank you so much Brother 😜. Shouldn't be long before the mount is released 🚀🚀. It's a proven design and has worked flawlessly during testing so far 👍

[@droningharry]

It's an amazing truggie and I love it, I'll be saving my pennies and clearing a card to buy it but it's worth every dime. Just keeps going and going.

[@rogueFactor]

I've been lowkey waiting on your review. My sledge still in the box blacksealed. for about a month now. (on the top shelf though 🤣 shhhhhhh arrmaheads are probably watching.) did you leave the shock tune stock out of box?

[@richduperbash2966]

HaHa 😂. ARRMA faithful will forgive you Brother 🤗. Got mine to help M2C test upgrades, but will say she's pretty tough. Definitely seeing the potential with a few key hop ups and tweaks. It's fun to wrench on and tune a new rig either way 😍. Didn't get to the shocks yet, but they're next. Just dialed down the rear shock collars a bit. 😎💪👊👊

[@jamiefox8670]

I like to see a fair comparison of cost between the kraton and the slege and upgrades and weather it's better to buy a kraton that's cheaper then upgrade or a over priced sledge?

[@richduperbash2966]

Not knocking the Sledge, but I'm guessing it's far cheaper and better to upgrade a K6s 👍. You can price it out, but both need an M2C chassis among other upgrades for harder bashing. 🍻

[@DjghostyMusic]

no fan or heat sinks for the motor? weird traxxas would do that as well as an exposed spur gear

[@codnamerich]

Great video! Where is this spot you go to located

[@armandopace6113]

Hi mate. You can get a threaded coil insert kit to repair any size stripped threads. They are great and you can get 3mm 4mm any size they will save you heaps of time and money 🦘😊😁😁👍.

[@richduperbash2966]

Thanks so much for the tip Armando 🤗. Truly appreciate it Brother!!!!

[@RCDUDE81]

Awesome first run with the Sledge bro!😍She does have lots of potential for sure! Great bench talk and first rip!💪💪M2C will make this a strong contender to the Arrma 1/8 line for sure! Some great stock designs but the motor mount system sucked!😝🤣My M2C mount has held mesh perfectly! Sucks on the high temps with stock tires..I ran 15/46 with the stock ESC then went to 17/46 with the Max 6. Probably a bit tall with regular Backflips but she moves! Wicked launches off the Mega ramp!🚀🚀That tire blowout someone had at the end was nuts!🤣🤣Killer run bro! Can't wait to finish chassis testing!😎👊🤘🤘

[@richduperbash2966]

Thanks so much Brother 😜!!! Stoked to have a new rig to wrench on 😍. Definitely see the Sledge's potential thanks to Mitch and Avery. Loving the mount and hexes. Just gotta get her dialed in a bit and bust out the M2C chassis 😱🥰🥰. It looks friggin gorgeous and having the motor flip option will be perfect for the bigger power set-ups. I was planning to swap the regular Backflips on, but might stick with the LP's. They're working great with the 16/46 gearing 👍. We're seeing some summer like temps already 🥵. That tire blowout was hilarious 🤣🤣. John's first try with the 1730 Hobbystar running a 24T 😱. He's gearing down for next time. Truly appreciate the kind words Brother. 🚀🚀😎💪👊👊

[@clairecooper3848]

Love watching you bash , skills on a different level 👍👌👍

[@richduperbash2966]

Thanks so much Claire 🍻😎💪👊👊

[@joseCalderon1976]

I know you guys were having fun since you started in the day time and finished until it was NIGHT TIME! I've done that wrenching on my RC vehicles 🤣🤣🤣🤣

[@stephanesaucier5820]

Awesome bash brother, love all the mods 👍👍👍👍

[@richduperbash2966]

Thanks so much Brother Stephane 😜. More mods on the way 👍. Hope all is well up north 🍻🤙🤙😎💪👊👊

[@bobarends6324]

What's that grinding/crunching sound on 4:39? My Maxx V2 does make the same noise when accelerating out of a slide. Checked all gears and can't find anything wrong. Drives me nuts. Thanks in advance. 😎🤘🏻

[@richduperbash2966]

That's wheel rub, likely on part of the body. Usually happens near the fenders when the tires are ballooning and front wheels are turning. It makes a nasty angry elephant noise 🤣🤣. The Sledgehammer tires balloon big-time on the Maxx and the Sledge. 🤗

[@atnotthiolnoy1]

I'd say that chassis did well for those massive jumps! Great vid as always!

[@AverageRCBasher]

Love when I see a new Duperbash upload 🤟

[@richduperbash2966]

Thanks so much Brother 🤗

[@mybusiness6125]

Great video, can we get an update next time on the chassis, maybe with a straight edge to see how much she bent?

[@cuongdao323]

Can’t wait till the next bash

[@JPRC_CRAZINESS]

Great bash session brother👊🏻💪🏻😎

[@richduperbash2966]

Thank you Brother 🍻😎💪👊👊

[@ARR5ifty]

Great video brother!!!!! No matter what truck it is on your channel you always take them to the next level! Can’t wait to get out there again with you guys 😎🙌🏼🤟🏼🤟🏼🍻🍻🍺

[@richduperbash2966]

Thanks so much Brother Dave 😜!!!! Sorry you missed this evening session. I feel like a dummy for not checking my reciever plugs sooner 🤣. Switched to the Talion because my power kept shutting off with the Sledge and the sun was going down. Glad it was something simple. I'm digging the truck and excited to get her dialed 😍. Definitely see you out there soon Brother!!!! 🚀🚀😎💪👊👊

[@darksunridah]

Another great video Rich

[@richduperbash2966]

Thanks so much Brother 🍻😎💪👊👊

[@championcarcare8207]

Hello 👋 Mr.Duperbash have you thought about putting CVD in the rear I know with the original set up I put cvd all around and I had no problems whatsoever

[@richduperbash2966]

Thanks so much Brother 🤗. I'll definitely do that should I have any issues. Right now the O-rings are working great, but I truly appreciate the tip and will go that direction if necessary. 🍻😎💪👊👊

[@championcarcare8207]

@@richduperbash2966 cool one last tip if you want to add a bumper rpm# 81812 makes one that fits direct

[@richduperbash2966]

@@championcarcare8207 thanks Brother 👊

[@EJ-74]

Awesome bash as always. 🔥👍 The Sledge has really impressed me overall. ✌️

[@richduperbash2966]

Thanks so much Erric 🤗. Me too Brother. 🍻😎💪👊👊

[@gagemiller2845]

that's a sick place to do some bashing bro, great vid!

[@richduperbash2966]

Thanks so much Gage 🤗

[@doboy861]

That is just awesome to watch. Do you have any idea how high you are jumping?

[@richduperbash2966]

Thanks Dennis 🤗. Not sure on heights, but we're sending them pretty good. 🍻😎💪👊👊

[@jonk967]

Nice run Rich, I really want to like the sledge, but I think this RTR needs so many upgrades to cost what it does!

[@richduperbash2966]

Thanks Jon 🤗. I hear what you're saying Brother. It's a bummer they don't have a roller option. For 800$, the Sledge still needs some significant upgrades to become a reliable hardcore basher. 🍻

[@DB-qm4jx]

@@richduperbash2966 but that’s just it right? Hardcore basher? Regular driving it’s all good right?

[@Mudsuitable]

Now that was GNARLY!!

[@danilodinardo9003]

Do you think that a max8 will hold up inside a stock sledge?

[@richduperbash2966]

Yes it should no problem 🤗

[@CommanderAstigRC]

I totally missed this Bro Rich! What an EPIC first run with the Sledge Bro, great rundown of the truck too. The two piece motor mount design was my biggest complaint about this truck. Glad M2C is right in it solving the main issue. You were getting some ridiculous mega airs😍 off of the mega ramp brother. I'm hoping the M2C chassis will show up here soon, so I can get mine going. In the corner Still in pieces LoL 😂😂. I see the good ol favorite Talion soaring beautifully 😍.

[@richduperbash2966]

Thanks so much Brother Chris 😜!!! Traxxas actually did some nice engineering, aside from the motor mount. Dig how they designed the diff case housings being almost fully enclosed at the chassis plate. Also think that long 5th screw up the back portion really locks the casing down. Had a Blast out there learning the handling Bro 😱. Glad I didn't totally fry my motor 🤣. The Mega ramp was awesome as always 🚀🚀. Felt Killer to get the ole Talion back out at sunset 😍. You're gonna love the M2C Sledge chassis Brother. 🍻🤙🤙😎💪👊👊

[@rcunknown5303]

So nice to finally get out and bash again. Loved the new motor in my kraton exb. Definitely need to go down a couple teeth I'm blowing the tires off 🤣. Sucks the sledge was down it was impressive. Price isn't impressive but Definitely a good rig after m2c upgrades.

[@richduperbash2966]

So awesome to connect again Brother John 😱🚀🚀. The Hobbystar 1730 4092 is a Ripper for sure. With our summer temps, probably want a 20t to play it safe. You'll still have nice speed and wheelspin. Glad I got the reciever plugs sorted with the Sledge 👍. Getting my ass handed to me at work right now 😂. Talk soon Brother 🍻🤙🤙😎💪👊👊

[@Ashblastr]

Hey I have a question not at all related to this vid, I've watched alot of your videos and I need to replace my shocks on my arrma senton 4x4 vehicle, can you maybe explain where and how to do it, I cant find any quality shocks online.

[@richduperbash2966]

There are a few direct fit upgrade options for the 3s line, but I can't vouch for them not having tested them myself. The ARRMA Typhon 6s shocks are what I run on my Senton 3s. Just generally want lighter springs and oils for a good ride. Axial makes a shock bushing that fits perfectly for the upper shock standoff bolts. Sits perfectly in the shock cap holes. 👍

[@Ashblastr]

Do you have a link, I'm worried I'm gonna buy the wrong set, thank you so much for your help

[@richduperbash2966]

@@Ashblastr the part # for the Axial shock bushings is AXA1356. Here's a link to Jenny's RC for the shocks. You might find them on eBay as well. jennysrc.com/collections/notorious-v6-blx-ara8606v5/products/arrma-typhon-v5-blx-rear-shocks-assembled-dampers-springs-ara8606v5

[@Ashblastr]

Thank you sir, I appreciate it very much

[@Captinfun101]

Get one of Razzie new perfect pass servos they are epic . Brought my kraton to life.

[@FTG777]

Absolutely sick bro. Have you ever measured distance? Looks like about a football field of a send off the mega ramp! 😵‍💫

[@richduperbash2966]

Thanks so much Brother 😜. I haven't done a distance measurement, but definitely covering some ground with a wide open hit 👀. Love that smooth Mega ramp 😍🚀🚀

[@benturner9962]

Have u ever looked into the arrma big rock? Only asking bc it's one of my first serious rc and just curious what I could to make it better

[@richduperbash2966]

Yes I have Ben 🤗. I've uploaded several vids of the last and newest version BRCC. It's a tough little bugger. Here's a great upgrade for overall durability kzbin.info/www/bejne/aWW4fatvhKiti5Y

[@benturner9962]

@@richduperbash2966 have u done anything to the drive shafts bc I popped one of them off and now I only have 3 wheel drive

[@richduperbash2966]

@@benturner9962 with the 3s rigs, I set my slipper clutch 1/2 turn out from fully snugged. If your slipper is too tight, you're much more likely to bust driveshafts.

[@jordanritchie2198]

Heck ya rich ur my idol I want to drive rc cars just like you😜 nice beat down and I think it was a very smart choice to wait m2ç to put there mark on the Sledge be you picked it up. Thanks for the always great upload ✌🏻✌🏻

[@richduperbash2966]

Thanks so much Jordan 😜. M2C to the rescue once again 🚀🚀. So stoked they got the mount sorted out. I've got high hopes for this sucker. Really appreciate it Brother. 😎💪👊👊

[@taxpayertroy]

Mr duperbash, Do you need to have bigger diff cups for the m2c center driveshafts??

[@richduperbash2966]

No they're a direct fit replacement, just tapered hardened steel 💪

[@taxpayertroy]

@@richduperbash2966 thank you sir much appreciated love your videos and you family man. You are blessed

[@kurtiscurtis8102]

If you could only have one of the big boy bash units what would you buy this sledge or the arma kraton or what

[@richduperbash2966]

I would personally go with a Kraton. Just feel it's a better value with far more upgrade support and tuning capability. The stock motor mount design of the Sledge is an engineering misstep waiting to implode. Both trucks are worthy, but they both need M2C chassis's for harder use. Again.... it's too early for me to truly compare the trucks accurately. Once I've beat on the Sledge longer, I can give a better assessment. So far I'm digging it as it is now 🍻😎💪👊👊

[@robertshaw5326]

way to rip it up rich nice bash as always keep rippin!!

[@richduperbash2966]

Thanks so much Robert 🤗. I'm digging this new ride 🚀🚀

[@RC_Berserker]

I’m surprised you bit the bullet and picked up a sledge so soon 🤭 sweet session, bro! I can’t wait to get my “son of a darlin” out to the skatepark! Was going to yesterday but, things didn’t work out 🤷🏻‍♂️

[@richduperbash2966]

Thank you Brother 🤗. I was summoned by the Wizard Mitch to help test his awesome parts 😍. Hopefully you'll get Darlin out soon. I know all about plans changing 🤣😎💪👊👊

[@joseCalderon1976]

Man. M2C has made my Arrma 8s and 6s trucks flying tanks! Now the Maxx, Xmaxx and Sledge are getting some goodies too from M2C! I'm just a mid level basher (26ft high jumps is my maximum), but I still manage to bend chassis, break bulkheads etc. Hehe. How are those beefcake driveshafts coming along for the Xmaxx? How about some 7075 shock towers for the Sketer? Hehe. Thanks bro!

[@richduperbash2966]

I'm so grateful for M2C Racing and the other aftermarket companies. The XMaxx CVD style center driveshaft are available now thank goodness. Outdrive cups and CVD driveshafts are next. Not sure if we'll see Corally upgrades or not. 😎💪👊👊

[@mikehoskins4112]

Nice bash, my rear diff had a stripped screw in the bulkhead as well. I called them and they sent me a new bulkhead. Lots of guys online had the same problem. Who does Traxxas pay to build these. Geeez

[@richduperbash2966]

Thanks Mike 🤗. That's good to know. Hopefully the other plastic bits don't strip out. Probably was simply a rushed assembly with power tools. 🍻

[@rcilluminati26]

Nice! How did you not break any hinge pins? I guess you got the only 4 good ones they made. Lol!

[@nofreerides7033]

Fun to watch… great bash session 👍👍👍 when you think motor mount will be released???

[@richduperbash2966]

Thanks Brother 🤗. I'll check with Mitch and Avery and try and get you a rough ETA on the mount. 🍻

[@GreatLakesRC]

Oh man, Rich got a Sledge! This truck is getting a beat down now from the M2C test team 🚀

[@richduperbash2966]

Heck yeah Brother Aaron 😜!!!! So far I'm digging her with the M2C hop ups 👀. Just needs a bit more tuning. Should be a tank once Mitch and Avery are done with her. 🍻🚀🚀😎💪👊👊

[@whome5810]

Great vid! Can you show us how straight the chassis is with a ruler in the next vid please? I would love to see how well it held up to those massive jumps! Cheers!

[@richduperbash2966]

Thanks Brother 🤗. I'll see if there's anything to show. One thing is for sure, several of my fellow M2C test team members have already bent theirs. It becomes most evident when the chassis is completely stripped and set on a flat surface 👀. Clean landings often won't put a tweak on 6061 chassis's. It's butt landings, nose darts, and case jobs on uneven surfaces that put the most load on things. Skateparks will do it too 😱🤣🤣. 7075 T6 is the solution for worry free bashing. 🍻

[@whome5810]

@@richduperbash2966 Cool, how well do you think the stock Sledge chassis compares to the stock Kraton EXB 6s chassis?

[@richduperbash2966]

@@whome5810 probably not as well to be honest. Just did a chassis swap for the prototype M2C Sledge chassis and the stocker is fairly bent after just one run 👀. The EXB chassis isn't nearly as strong as M2C, but it's better than 6061 aluminum. 🍻

[@mango-rc]

Great insight🤙 Killer jumps!!!👌

[@richduperbash2966]

Thanks very much Brother 🤗

[@StevenYDG69]

Filthy skills! Beast mode on this jumps man, always great videos!🤘🚀🤯

[@richduperbash2966]

Thanks so much Steven 🤗. Much appreciated Brother!!! 🍻

[@nickteele169]

What an awesome and fun video. I've had mixed feelings of the sledge since it's announcement but it seems like it does good. Such awesome m2c goodies that motor mount looks awesome. I love my backflip LPS they definitely do great. It's awesome to see all your buddies jumps. Do any of them have KZbin channels? I still love that ramp it's awesome. I was a Lil late getting to watch the video but we'll worth it. Thanks for another awesome bash video man 🍻🍻🍻🍻🍻🍻

[@richduperbash2966]

Thanks so much Nick 😜. I wasn't very interested in the Sledge either, but it's got serious potential as a hardcore basher with help from M2C😍. The Backflip LP's have become one of my all-time favorite tires 😱. They just take a hammering. My buddies John and Ian both have channels. I'll try and link you in a bit. Truly appreciate the kind words Brother. 🍻😎💪👊👊

[@nickteele169]

@@richduperbash2966 thanks man. Definitely will subscribe to them. M2c are the leaders for sure. And they save alot of rigs with their options

[@richduperbash2966]

@@nickteele169 kzbin.info/www/bejne/e563h5JqhK-IoK8

[@eriks.5829]

Hey Rich, What servo do you plan on putting in that Beast?

[@richduperbash2966]

I'm likely putting in a spare Power HD 23kg WP. I run them in my ARRMA 6s rigs and they do awesome overall 🤗

[@trashkid4189]

How do you keep your temps down without losing so much power?

[@danimudura3213]

which one seems better to you. kraton or sledge if you make some improvements to both?

[@richduperbash2966]

The Kraton is better no question. The drivetrain is stronger due to hardened steel gears. It's very expensive to make the Sledge truly durable. The latest Kraton EXB RTR 6s is on a completely different level of durability and performance for the same price.

[@danimudura3213]

for the sledge, I say that if you put a motor mount on it, it's ok. not?

[@richduperbash2966]

​@@danimudura3213the Sledge's biggest problem is the stock motor mount. Going with M2C Racing or another quality aftermarket 7075 mount is a must.

[@V8chump]

11:21 that landing looked sweet, must be some pretty soft dirt

[@richduperbash2966]

Thanks Brother 🤗. Some of this pile is rock hard. Just depends where you hit it. 🍻

[@zsaxeshed5743]

Killer sends bro!

[@richduperbash2966]

Thanks Brother 🤗

[@rccrazy]

Yeah that was a SICK Sledge test😈🤘 And definitely agree 7075 chassis for even 1/10 every time if it's a true basher! Keep pushing the limits man💪👊

[@richduperbash2966]

Thanks so much Brother 😜. 7075 T6 is the answer 💪. No it's not cheap, but it's a one and done solution to avoid a host of other problems. 😎💪👊👊

[@rccrazy]

@@richduperbash2966 spot on man!👌 You want some weak points but not the main component of the build😅

[@stuart3712]

Traxxas with a metal chassis, how ironic. I got out of RC's for like 2 years or so now... Feels like its only been months... Got into a new hobby and one that cost a little more and just as fun and this one has no fan wars on which is better so its nice.

[@rctd3260]

2:11 what are those adapter wires that connect from the motor wires to the ESC?

[@richduperbash2966]

I soldered up some 6.5mm cup extensions 👍

[@rctd3260]

Thanks!

[@winstonoso5821]

What kind of tires n wheels r good for a 6s kaiju? I keep blowing the stock kaiju tires.

[@richduperbash2966]

I'm not certain about the stock Kaiju wheel diameter and offset, but I'd think the standard 6s dboots Backflips would work great. You could probably add extended hexes if you needed or wanted more offset. I've had great luck with the Backflips. Still my all around favorite bash tire. 🍻

[@winstonoso5821]

Ok thank you guy👍 I'll try those tires out.

[@faisalbaig5306]

That was an awesome bash Rich! The burning question is how do u compare it to ur Kraton 6s ? Awesome video as always

[@richduperbash2966]

Thanks so much Brother 😜. I'm impressed with it so far. The Kraton is definitely a Beast 😍. Kinda early to compare the 2, but the Sledge looks very promising with the right upgrades. The drivetrain feels smooth and it's easy to drive. Just need to do a bit more tuning. The steering is pretty crappy 😝. A better servo should definitely help. Not sure about sway bars, but might experiment anyways. 😎💪👊👊

[@faisalbaig5306]

@@richduperbash2966 hey dude! I am grateful and honoured by ur reply! Love ur videos and always learn more and more from them! Rock on man!

[@stevenberninger9841]

Just wondering if you might have an idea of why the hell my rear diff seems to be rubbing on the chassis on my kraton 6s exb? Any tips??

[@richduperbash2966]

The chassis is machined with a gear slot to avoid contact with the ring gear. It's possible if the diff case is damaged or chassis is bent 🤔. I would inspect the chassis closely to see if you can find evidence of gear contact.

[@stevenberninger9841]

@@richduperbash2966 oh yeah there is definitely a little bit of a mark on the bottom of the gear slot on the chassis. Could it be that I torqued the screws on the bottom of the gear case too tight? Cuz there is no obvious bends or dents in that area. I just got the hot racing gear case so maybe just swapping to the new case will solve the problem... I hope. I need to have my trucks up and running cuz thats what I do now instead of heroin. My trucks are my new and most fun enjoyment so I try to take good care of of them. Thanks for the tips. Happy bashing!!

[@richduperbash2966]

@@stevenberninger9841 good deal Steven 👊. The HR diff cases are a Killer upgrade. No stripping or cracking 💪. Hope it was an isolated incident. 🍻

[@2040RC]

Nice video mate! :)!

[@richduperbash2966]

Thanks so much my Italian Brothers 😍🚀🚀😎💪👊👊

[@islandrc-duke1972]

cool rc and bashing,great info on it

[@richduperbash2966]

Thank you Brother 🤗

[@islandrc-duke1972]

@@richduperbash2966 👍😊

[@robgoffroad]

How did you convert from the battery box to the one with strap?

[@richduperbash2966]

It was pretty easy. I just unbolted and removed the front and rear plastic upright bits and the plastic battery retainer lid. I used dense foam for padding at the front and rear of the tray and 1/4" thick self adhesive felt padding (from Walmart) for the front and inside lip. You can lift the tray, set straps underneath into desired position around a lipo, then bolt the tray back on the chassis. That keeps the straps wherever you set them. A cross strap near both ends has worked great. 🍻

[@norcalrc]

So Rich drives anything and it grows red bull wings and flies? That la for the breakdown under the body for this one

[@richduperbash2966]

Thank you Brother 😜. She flies pretty good with this setup 🚀🚀. Looking forward to getting her back out soon. 🍻😎💪👊👊

[@UrWishIsMyComand]

🙌

[@lifethroughalens2000]

2 questions what size o rings for the axles and how many holes for the tires

[@richduperbash2966]

The O rings I used were about 7mm internal diameter. I always vent each bash tire with 2 holes per tire 180° apart and tape over the rim holes. 🍻

[@lifethroughalens2000]

@@richduperbash2966 Thanks Boss greatly appreciate the response. 😄

[@richduperbash2966]

@@lifethroughalens2000 you bet Brother 👊

[@BigJeezie]

Need a dual motor fan and you'll be good.

[@mattmaclearn263]

Get a set of the complete front drive shafts they fit on rears

[@richduperbash2966]

Thanks so much for the tip Matt 😜. Definitely still learning this platform. Really appreciate it Brother. 😎💪👊👊

[@mattmaclearn263]

For a new rig I’m not a fan of the screw ups an overlooked issues. They should of I had better engineering and taking their time

[@mattmaclearn263]

Lol m2c will fix that

[@marioleyva4091]

First 🤙🏽 Wish they sold it as a roller lol

[@richduperbash2966]

No doubt Brother 👊

[@michaelrobinson3127]

Or better yet a kit ! My kraton had a couple stripped holes and a few loose nuts. I'd rather build the whole thing myself.

[@matth4069]

I'm not into the tbone racing stuff. I break their stuff way too often on my xmaxx. To the point where I got tired of contacting them about it and just kept stuff off the truck once they broke. I did like the A-arm skids for it but eventually the front ones broke too. I broke a front bumper the same day I replaced it with a warranty one. Blah.

[@richduperbash2966]

That's good to know Matt 👍. I won't bother trying their bumpers on my XMaxx. I've had good luck overall running their smaller Typhon Tbone Basher 6s, ARRMA 3s, and MT410 bumpers. Some of their stuff is kinda heavy or questionably designed. 🍻

[@matth4069]

@@richduperbash2966 the biggest problem with them is the screw heads rip right through the plastic so then you have to washer them. Then they'll just snap at the hole. Their brace isn't very strong either. You bash harder than I do so I don't think the tbone stuff would stand a chance lol one sketchy landing and you'll be picking up the pieces without a doubt. I've just been running the stock ones and keep spares. Haven't looked into anything else.

[@winstonsmith9619]

The problem with your videos is that I don't feel like my stock Maxx is powerful enough anymore😅

[@Shaunusprowire1748]

Hey rich as I can c Ur enjoying the sledge now, like u said to me limited gearing option's, now m2c got there magic hands on this platform make a good basher, still dialing in my X maxx with m2c had brill day out bashing with my brother's, not has high as u rich lol may be one day lol 👍😂💪✌️🍺🍻

[@richduperbash2966]

Thanks so much Shaun 😜. Definitely enjoying this new rig with the M2C bits of course 😍👌👌. Everything they touch just keeps getting better. Awesome to hear about your XMaxx 😱. Having fun and sending with your brothers is where it's at. 🍻😎💪👊👊

[@Shaunusprowire1748]

Rich thanks so much I always take note of wot u say has very wise thanks dude widened axles m2c r mentle, much better now handling wise and brace by m2c saves my bulkheads so far so good 💪👍👌✌️😂😁😆🍺💯

[@andreimschnee]

A mega ramp? I put myself a large ramp of wood at the construction site.

[@alvinanderson1048]

As much as you are in the air, I'm surprised you don't fly planes. Haha

[@jdpaslRC]

Bash on. RCFL.

[@kenhowell8403]

You really have some great places to go bashing.

[@richduperbash2966]

Thanks Ken 🤗. Hopefully they'll stick around a bit longer. Finding good spots can be a challenge with all the urban and suburban development 😎💪👊👊

[@kenhowell8403]

@@richduperbash2966 a Agreed. I'm in New England so it's even tighter up here. Just not too much in the way of open spaces but I keep looking. Either way, I'm enjoying my new hobby.