Traxxas TRX4 Bronco 2021 Upgrades H-Tech Metal Front and Rear Bumper Rock Slider Roof Rack Fender

[@KobtsevRC]

🔴Traxxas Ford Bronco 2021 playlist kzbin.info/aero/PLTAysvuQv0cXU1GOINqhAI52oPpMdfuzo 🔴Traxxas TRX-4 Ford Bronco 2021 Upgrades kzbin.info/aero/PLTAysvuQv0cXJxJLt5t2S2GnqsQjyW7Lc Thanks to everyone who likes and writes comments and also shares my videos!

[@geesoutdoorpursuits9169]

Those upgrades just lift the Bronco to a whole new level, classy.

[@KobtsevRC]

Thank you very much my friend for the kind words! Yes, this update is very cool, but it is very expensive! Watch the video where I installed the brushless motor! Hopefully soon I will continue to update it! UA!

[@donald2818]

Nice vid. Good music which is a refreshing change from the garbage many people embed in their videos.

[@KobtsevRC]

Thank you very much for your kind words! I am very glad that you liked what I am doing, I am glad to see you here. Thanks for your support and your comment, I appreciate it!

[@cbwizard1982]

Very nice mods and cinematography! Loved that we got to see all of the installation. Cheers!

[@KobtsevRC]

tHANKS so much! Im really happy when you like what i do. Much appreciate! Work on new video hope see you soon! Take care! Have a nice day!

[@WestSidewaysRcDrift]

Nicely done! Enjoyed that video! Bronco is so cute now, i like those rims fit amazingly good with the body!

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@WestSidewaysRcDrift]

@@KobtsevRC i can tell that u had invested in a good camera set up, ur footage is very much improoved, keep up the good work

[@KobtsevRC]

Many thanks! I use a phone))) Very rarely a camera)))

[@Jason_Hermann]

Awesome truck! This was filmed with your phone?

[@KobtsevRC]

Thanks so much. Yes this my phone) (iphone 11)

[@Jason_Hermann]

@@KobtsevRC wow, that is really impressive quality!

[@KobtsevRC]

@@Jason_Hermann I must have deceived you a little. Those frames that have a very blurry background are Sony 5100 + SEL35mm F 1.8 Those frames where I assemble the car were taken on the phone. I forgot that I used the camera a bit.

[@KobtsevRC]

@@Jason_Hermann anything up to 25 seconds is Sony 5100 + SEL35mm F 1.8

[@Jason_Hermann]

Ahhh, Yeah the 1st 20sec or so looked like a real camera 👊 good stuff!

[@amirofie]

I am enjoying watching this video. Awesome upgrade on the H-Tech accessories .

[@KobtsevRC]

Thank you very much my friend! I'm glad you like it) I'll watch your video now))) Thank you for your support!

[@vbspeed7571]

Lookn 4 new subscribers on v& b speed thank u have a grate day

[@rcfungames]

Cool upgrades 👌 The end result is epic 💥💥💥 The go fast stripes or my favourite 😁 Great job bud 👍 your bronco looks amazing 🔥🔥🔥🔥🔥

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@masonmacek518]

I love how it looks like the Bronco is kicking off the fender! Love the car man!

[@KobtsevRC]

Thanks a lot for watching and supporting!

[@domirc5474]

This Bronco is realy beautiful my friend , 😯 with all this parts , is perfect now !! , you make a great job !👍 have a good week-end 😉

[@KobtsevRC]

Thanks for watching my friend! I’m really appreciate it. I’m glad you liked it. See you soon.

[@KoreaRCFilm]

Very cool H-Tech !

[@KobtsevRC]

Yes looks so cool 😎 But there are two disadvantages, it’s the price and the fact that metal scratches a lot

[@heaven83hj]

Nice New Bronco! The H-Tech product is good!😊

[@KobtsevRC]

It sure is! Thanks for watching! Im really appreciate it! See you soon!

[@vbspeed7571]

Grate looking rig ..hello from V&b speed a new rc community ✌

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@RCplamodel]

Bronco has transformed really nicely!~~~ Thumbs wide up!!👍👍

[@KobtsevRC]

Thanks for watching my video. I’m very glad you liked it. Thank you for your support and comment. Stay tune

[@jhonvargaspinzon6716]

Good work awesome bronco

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@RCPlayGround]

H-Tech products are of excellent quality and good design.

[@KobtsevRC]

100% my friend! Thanks for watching!

[@str8pap3r]

How do I order this for my bronco

[@KobtsevRC]

@@str8pap3r check link below 👇

[@SandJ-Adventures]

Wow! A lot of stuff going on that Bronco! 😄 Great video, love that you filmed all of it! The car looks fab now, and great to see it before and after. Stay safe over there!🇺🇦

[@KobtsevRC]

Thank you very much for watching and for watching my video. I'm glad you liked it. You can check other videos. I keep improving it. After the war, and I will install a new servo and possibly new axles. Thanks for your support, I appreciate it!

[@Iamfirebird360]

Added weight from the bumpers and fender flairs must help it look more realistic while driving. Great video.

[@KobtsevRC]

Thanks 🙏 for support

[@KobtsevRC]

Ooo I’m forgot to say new epic update soon. New body Bronco Raptor

[@LouieMiLLz]

The detail crazy!

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@jacobhill9420]

That thing is badass. Nicely done

[@KobtsevRC]

Thank you very much I'm glad you liked it! New update coming soon!))) Bronco Raptor)

[@kevintucker9252]

Truck looks amazing. Where did you get those graphics from. Could not find them.

[@KobtsevRC]

Thank you very much for your kind words! If you have put stickers on the body it is all from H-Tech Customs Check the link in the description!

[@sparkysworld6768]

Great video as usual! I love the axe motor! I'm thinking about getting one for my Bronco.

[@KobtsevRC]

Yes Hobbywing AX R2 is very cool. Very smooth and very fast when it's needed))) I love to have fun on it! Thanks for your support, I appreciate it!

[@BlindGuyRc]

It is a great looking truck. Traxxas did do a great job

[@KobtsevRC]

Thanks 👍 Traxxas yep but H-Tech also do this best)))

[@krashkingrc9715]

Wow awesome video truck looks amazing definitely a big change

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@islandrc-duke1972]

Cool upgrades

[@KobtsevRC]

Thanks a lot for your support. I am very glad that you like it. I appreciate it!

[@TruSwagTv2]

Super dope install 💯👊🏾

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@n22pdf]

Wow great job :) looking at picking one of these up soon.. :)

[@KobtsevRC]

Very glad to hear it! Thank you so much for your support I'm glad you like it! Thank you!

[@907arcticrc6]

Awesome video and upgrades Thanks for sharing my friend and stay safe. 👍🥶👍

[@KobtsevRC]

Thanks for watching my videos bro 😎 I’m really appreciate it!!!

[@MikeRCWorld]

great upgrade, looks nice and cool 👍😊

[@KobtsevRC]

Thanks a lot for your support. I am very glad that you like it. I appreciate it!

[@rcfenrir]

Ordered the raptor kit after seeing your videos!

[@KobtsevRC]

Thats cool! I hope you will like it.

[@rcr-lin388]

Looks greate~! Awesome upgrade👍👍😄

[@KobtsevRC]

Thanks! 👍I'm glad you like it. This update is very expensive but beautiful. Thanks for your support, I appreciate it! See you soon!

[@MarcoRCArena]

Looking great. Fits perfectly! 👌🏻🍻

[@KobtsevRC]

Thank you so much my friend for watching and for watching my videos until the end, I appreciate it! Your support is very important to me!

[@DerekElwell]

Nice video, who makes that battery operated drill

[@KobtsevRC]

😂😂😂 It was me. Did you like my battery? 🤣🤣🤣 Thank you for your support

[@homemy1638]

May I ask where you bought your car's big logo spare tire cover?

[@KobtsevRC]

H-Tech custom with contact с instagram.com/htech_custom/

[@KiKoMaSo-RC]

woaw nice upgrade 👍

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@KiKoMaSo-RC]

@@KobtsevRC I subscribed 👍 Have fun

[@theamericanoff-roadrc]

Nice detailed look at the upgrades on the Bronco. She looks marvelous. 😁👍

[@KobtsevRC]

Yes, I liked it too)))) Thanks a lot for your support. I am very glad that you like it. I appreciate it!

[@mutluevyapan376]

Do you have a link for the side stickers?

[@KobtsevRC]

Hello! Yes h-techproduct.com/category/trx4-bronco/59/?page=2

[@mutluevyapan376]

@@KobtsevRC thank you

[@KobtsevRC]

@@mutluevyapan376 no problem

[@htechcustom]

wow friend so cool!! 😍😍😍

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@garasihobiar4655]

Sangat bagus ini rc nya...

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@leo_the_leeman1387]

Absolutely beautiful i love this....plz do a video on stickers

[@KobtsevRC]

Thank you very much for taking the time to write. In this video I showed how I pasted the stickers.

[@leo_the_leeman1387]

@@KobtsevRC thanks brother . I was just talking about the way how to purchase ...and saw the link you provided.thank you so much god bless love from INDIA🇮🇳

[@KobtsevRC]

@@leo_the_leeman1387 I'm glad it helped you!

[@JoeOvercoat]

Great work. Easier seen than done.

[@KobtsevRC]

Thank you very much for watching and nice words I appreciate it, for me it is the best reward for my efforts. There will be some videos with updates soon. See you soon

[@rayng50cent]

This is so cool, may I know where to get the stand ? And the wheels ? Have you mod the suspension ?

[@KobtsevRC]

Hey! Thank you very much for watching and good words! I will add a link to the wheels and stand in the description in a couple of minutes. No suspension I have not yet changed, but in the future I will do it. Next I will change the motor. It will be in 1 week

[@michaelc3416]

So, I may have missed it... But, did you use the stock 1.9 tires, stretched onto the new 2.2 wheels? I've ran across a few videos that implied that helped eliminate bead roll over, but I've never tried it. Or, did you replace the tires as well? Thanks. And again, great videos!

[@KobtsevRC]

In this video, yes, I used 1,9 tires and 2.2 wheels.But I did it because my tires took a long time to arrive from the store. But then I installed tires 2.2

[@jpkmates]

nice video, quick question where are pads for the fender. i order all from this video for my bronco didnt see pads for fenders

[@jpkmates]

nvm, my bad...see them on old fenders....duh....lol

[@KobtsevRC]

h-techproduct.com/product/rc-110-traxxas-trx4-ford-bronco-2021-aluminum-metal-fender/79/category/59/display/1/

[@MrYuyujargon]

Great looking bronco 👍👍

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@bikerfiremedic9945]

Where did you get those wheels? Those are badass !

[@KobtsevRC]

Check the link in the description of H-Tech or amazon

[@sofloflow]

I know metal parts aren't the best for crawling, but damn they look good!

[@KobtsevRC]

Yes, you are right, they are heavy, they do not glide well on the stone and are very scratched, then they are beautiful))) Thanks for your support and comment!

[@sofloflow]

@@KobtsevRC yes, the scratches add character! 👍

[@doshermanosrc4265]

Awesome Video!!!!!!!!!!!!!!!!

[@KobtsevRC]

Glad you enjoyed it

[@GrimJerr]

Did yours come with the clear plastic in the side mirrors, or did you add that ?

[@KobtsevRC]

Hey! Welcome! No, I did not add anything to the side mirrors with the factory standard sticker, I did not change anything. Thanks for watching and your support! See you soon!

[@GrimJerr]

I recently discovered that there were stickers there, mine must have scrubbed off. I am going to be cutting and adding them now.

[@KobtsevRC]

@@GrimJerr Cool idia

[@Voldano-02]

So cool

[@KobtsevRC]

Thank you so much my friend for watching and for watching my videos until the end, I appreciate it! Your support is very important to me!

[@TheRoadTaken]

Why did you go with metal fenders, for the added weight, aesthetics, or something else?

[@KobtsevRC]

Because of the extra weight and aesthetics! A new update will be released soon and there the wings will be even heavier!

[@Fre2dy]

Yo bro,how did you fix the roof tent on the gallery? I have the same as you, but there are no holes under the tent!! Thank's Strength to you and your ones

[@KobtsevRC]

Just use self tapping screws to screw it in. It will hold strong enough. I'll show you later.

[@KobtsevRC]

prnt.sc/cgH04GP8R_BC

[@Fre2dy]

@@KobtsevRC thank's bro👍🏻

[@KobtsevRC]

No problem, write with any questions.

[@Sherky59]

Quick question before I order, will you still be able to use the Traxxas Winch with the front bumper?

[@KobtsevRC]

No

[@Chilliwacka]

Looks really great, is the stock 1.9" tires mounted on the 2.2" wheels?

[@KobtsevRC]

Here yes, but then I changed the tires Thanks for watching and good words. Check out the following videos!

[@geraldanthony7324]

great job bro 👏 👍 👌 💪

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@ljdelgado]

Greetings! Great rig, have been following along and seen a bunch of videos, however, still wondering where can I get the roof "luggage compartment" featured in 9:41, please help.

[@KobtsevRC]

Thanks for support! h-techproduct.com/product/rc-110-roof-top-tent-hillander-with-decal-sticker/117/category/26/display/1/

[@ljdelgado]

@@KobtsevRC thank you!!! Going to break the bank as we speak! haha

[@KobtsevRC]

@@ljdelgado you are welcome 🤗

[@Ceredathor]

Where to find the stickers/decals printed to give it that sweet look?

[@KobtsevRC]

instagram.com/htech_custom/

[@csdunaway]

I love the work you do on your Bronco. Can you send me the link where you got these tools? I like them!

[@KobtsevRC]

In the description Xiaomi Mijia Electric Screwdriver amzn.to/39xNmpP Screwdriver with bits amzn.to/3I0FXLw amzn.to/3HXvQXW

[@csdunaway]

@@KobtsevRC Thank you! I just place my order at Amazon!

[@michaelcargillsr.8818]

Nice video, music is 🔥🔥🔥🔥🔥 as well.

[@KobtsevRC]

I'm glad to see you! Thanks for the kind words, it's great that you enjoyed it! Thank you very much for watching and for your support!

[@RoadsideRC]

The truck looks AMAZING! Are you worried at all about that extra weight hurting the performance, or just in it for the scale looks? Subscribed!

[@KobtsevRC]

Thanks a lot for watching and supporting! I try to balance performance and appearance

[@JoeOvercoat]

@@KobtsevRC I like to think of it as scale performance: one needs some weight on top to recreate the dynamics of driving a 1:1. It’s a win-win.

[@KobtsevRC]

@@JoeOvercoat I understand what you're talking about. I have heavy cars like the D90, you can see how heavy it is in it. I am also building two more machines, they will have a very heavy body. Toyota LC80 and Discovery

[@roadrash76]

Where can I buy the bronco decals? Thanks

[@KobtsevRC]

Hi thanks for watching! Look in the description there is a link H-Tech

[@Akipad2]

Da gibt es keine Sticker!

[@918DEATH]

Hey there where can i buy your power drill please thx

[@KobtsevRC]

Xiaomi Mijia Electric Screwdriver Thanks for watching!

[@918DEATH]

@@KobtsevRC thx man

[@KobtsevRC]

@@918DEATH no problem my friend

[@geraldanthony7324]

h tech customs are very good I have a pair of the rims myself

[@KobtsevRC]

Yes, these are very cool wheels and other details! Thanks for the support! I'm glad to see you here!

[@rodgalley9209]

Hey mate, most of those parts are sold out unfortunately on Amazon. Where did you get all the stickers from, they look great.

[@KobtsevRC]

Yes, unfortunately, check this link www.ebay.com/usr/h-t_4632?_trksid=p2047675.m3561.l2559 Thanks for the good words and for the support!

[@Andrewolf79]

Nice work is this a display model or a truly used truck

[@KobtsevRC]

Hello thanks for watching! This real RC Truck i think you see this in my other videos:) See you soon im working on a new video

[@SevenWelt]

Cool ! 👍

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@Ozerex]

What size tire did you use on the 2.2 beadlocks? I know some people stretch 1.9’s on them

[@KobtsevRC]

In this case, I used 2.2 beadlocks and 1.9 tires, but only because the delivery of my new tires was very long. Look at other videos, I used 2.2 tires there but in a small size.

[@Ozerex]

@@KobtsevRC okay thank you🙏 hope you have an amazing day and I absolutely love your build 🤯

[@SlavaRC]

Очень крутой и красивенький Бронко получился у тебя, снял так сочно, что прям руками потрогать хочется!)🙂🤭 Великолепная работа дружище!🥰🤩💥💯👍👏 Порелаксировал, смотря ролик) и вспомнил былое, как ночью ты собирал!) Не хватает твоего общения и юмора!) Во были времена, я с женой вспоминаем с юмором наши посиделки по ночам!)🥰🙂

[@KobtsevRC]

Всяко может еще быть, будем посмотреть) Спасибо, рад что понравилось ну я знал в принципе что тебе зайдет. Скоро продолжение, вот сижу делаю.

[@mangodesign98]

Beautiful

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@javiejosecontrerascabel8670]

Muy bonito,para estar en una estantería

[@KobtsevRC]

Hello, my friend! Thank you for visiting my channel and writing me a comment. Yes, I like it too! Very soon there will be a video in action. Stay tune!

[@alexalpizar4096]

Beautifull RC

[@KobtsevRC]

Thanks 👍 Thank you for your support and your comment is very important for the channel

[@ronnieblovelee8791]

Nice...Where did you get those graphics from?

[@KobtsevRC]

Do you mean stickers? h-techproduct.com/product/rc-110-traxxas-trx4-bronco-cutting-decal-a-type/132/category/59/display/1/

[@aubreywarren8373]

Clean my brother

[@KobtsevRC]

Thank you very much for watching my videos! I appreciate it! When is pure good or bad? see you

[@SirTubeALotMore]

At least we got to enjoy the result for the whole of 15 sek

[@KobtsevRC]

I'm enjoying the result so far :)

[@frankmattingly8173]

To bad you can’t do a ifs swap in the front like the real one. Cool build!

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@ryanwalter757]

I love the truck but the only thing I don't like is the front bumper because You've got no mounts to mount a winch there's not even a area where you can mount a fair lead on it

[@KobtsevRC]

Yes, I completely agree with you. But with a strong desire, we can make a hole in it and install the winch inside.

[@ryanwalter757]

@@KobtsevRC Yes but there is nothing for the winch the sit You've gone with style over practicality

[@TOPRCBrasil]

Amazing.

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@teemuhall]

You don’t have the lift kit with the 2.2s do ya?

[@KobtsevRC]

no i dont use lift kit

[@miniature2257]

Magnifique j'adore ❤️

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@cat-cambodia1801]

Good job 👍

[@KobtsevRC]

Thanks for the visit

[@KenAngryBear]

Cool.. and what kind of name power screw guns? Let me know thank 🤩

[@mikealexis]

Lovely

[@KobtsevRC]

Yes looks so cool 😎 Thanks 🙏 for watching.

[@LouieMiLLz]

🔥🔥🔥🔥🔥

[@KobtsevRC]

🚒🚒🚒🚒🚒🚒🚒🚒

[@NerdHobbiesDiecast]

what kind of electric screw driver is that?

[@KobtsevRC]

Hello my friend! Thanks for watching! This Xiaomi Mijia Electric Screwdriver Надеюсь тебе понравилось это видео! See you soon!

[@Hohopapa84]

와우 h테크 풀옵션이네요 ㄷㄷ 🤩👍👍

[@KobtsevRC]

Thank you very much for watching and your support, I am glad to see you here and I am very glad that you enjoy what I am doing! Your support is very important to me. It is my subscribers who inspire me to keep doing what I do! I appreciate you! See you soon!

[@jpkmates]

how can i add winch with metal bumper from htech

[@KobtsevRC]

I think you can install a winch inside. I will be doing this update soon

[@jpkmates]

@@KobtsevRC ty so much will wait. I order rear bumper. Ur videos are awesome

[@ChâuCôngThọ]

Cho tôi hỏi Tất cả phụ kiện bạn mua ở đâu vậy

[@myrcfun9183]

beautiful

[@KobtsevRC]

Thanks 🙏 so much

[@TOROKRC]

hello, what is your gallery of you? and its measurements please? I can't find one. thank you

[@KobtsevRC]

In the description

[@zigircreview5740]

Can u give me link sticker bronco

[@KobtsevRC]

h-techproduct.com/product/rc-110-traxxas-trx4-bronco-cutting-decal-a-type/132/category/59/display/1/

[@saltlife1349]

The upgrades are must have but they cost more than the Bronco 👀

[@KobtsevRC]

Yes, my bronco has become several times more expensive

[@yosepkaka3428]

Where i can buy that stuff

[@윤호준-p2j]

장착하신 지붕장식 어디서 구매 가능한지 궁금합니다

[@inikobmore30]

Wow 👌 👏

[@KobtsevRC]

Thank you very much for visiting my channel and taking the time to watch my video. Also, thank you very much for writing to me. Your support really helps the development of the channel. I'm always glad to see you here. See you later!

[@TheHousemaster90]

Wo bekommt man die Felgen und die Felgen Narben her ?

[@KobtsevRC]

h-techproduct.com/

[@TheHousemaster90]

@@KobtsevRC danke

[@mikejurnak0324]

I'll trade you rustler 4x4, slash 4x4, scx24, upgrades parts and two sets of tires for that bronco?

[@KobtsevRC]

Thank you, but no))) I think this is not enough and I do not like these models

[@reverse_aid0744]

What was the first song

[@KobtsevRC]

ES_Kenji - Ooyy

[@bearkor1095]

루프탑 설치 어떻게 하나요?

[@KobtsevRC]

fasten it with screws

[@calebsmitherman3571]

How do you get the tent on

[@KobtsevRC]

Just screw it on

[@loganrideout9151]

Could I just pay you to do one of these for me? Lol, I don't have the skill or the patience to do it myself.

[@KobtsevRC]

I think it's possible, but not now. Now there is a war in my country, the delivery service is working intermittently

[@loganrideout9151]

@@KobtsevRC I hope the best for you and your people my friend. I wish my country was doing more to help.

[@KobtsevRC]

@@loganrideout9151 thanks so much