E36 M3 GETS NEW DIFF AND SUBFRAME BUSHINGS!

Part 1: • E36 M3 Subframe Remova...
Part 2: • E36 M3 Subframe & LSD ...
►Make your car look like mine! Links on my website below to all the parts I use and more sick mods for your BMW! Thanks for supporting the channel!
SHOP►►►treatsonthestr...
►Follow me on social media for the inside scoop!
•INSTAGRAM: @treatsonthestreets
/ treatsonthestreets
•FACEBOOK:
/ treatsonthestreet
MUSIC: Beats by Con
#bmw #e36 #e36m3

[@jordanwonsewitz3987]

Bro if you make more videos you really gonna make a living on this shit. Some of the best content and definitely my favorite channel! Let’s commit to more video

[@sansanper7562]

Jordan Wonsewitz I have a e36 channel. I up load weekly check it out m.kzbin.info/door/HCI5VULXmSoGmzK5nu3Mzg

[@carloslargaespada6051]

F yeah bro!!!! Thanks for the video. I get to work on a 97 328i convertible not an M car but I baby it and it loves it!! Your right these are friggen' bomb- diggity colored bushings!! Please keep the videos coming bruh!

[@Pawinning]

Dude the bushings look so clean! I didn't know that the bushings were molded so perfectly to the subframe! im excited to see your reactions to how the car handles once everything is buttoned up 👍

[@Fujikawa42]

Nice work, I've done poly bushings on my Rx-7 and it definitely made a difference!

[@TreatsOnTheStreets]

Sweet! Looking forward to bringing you all along for my first drive.

[@kylee3475]

I recently got myself an e36 m3. New to the channel but fantastic content man!! I'm new to working on cars but your videos make it easy with the step by step instructions. 👌👌

[@glenniemotorsport947]

It always looks easy with some editing, i've realised that since i started making a few videos on my e36

[@kylee3475]

@@glenniemotorsport947 I didn't mean the work was easy lol. Just that most channels don't show you where every nut and bolt is like this guy does. Makes it so much easier.

[@SaveTheGhouls]

Yes I've been waiting for this!

[@StacheCam]

I need to do this to my e34

[@danielfulop]

this is a reeeeally good channel

[@toonicemedia2465]

I'm going to get these on my 2000 e46. I also noticed they had a guibo , it looks so sick.!!!

[@leetabb4341]

nice job Gavin! coming along nicely.

[@TreatsOnTheStreets]

Thanks!

[@theoriginalcontentcompany997]

Literally just bought these bushings because of this vid!

[@torrau1g]

Love you channel, doing same thing atm for mine 325i

[@takumifujiwara8565]

Nice

[@AgainstEmpyre]

Starting to look good! :)

[@NWGarage]

Bad ass video

[@RamStig]

Hello man! Really appreciate with all your DIY vids! I have an E36 too in my home and I wanna do replace all the subframe bushings etc etc like u did. Do you have any tools list what tools you use? As I'm not too believe in local workshop here, so I decided to do it myself. Cheers man! Keep up the good work!

[@Ovadose850]

Gavin those bushings look sick ! Never seen powerflex or turner motorsport label they’re bushings before. Where can I find some revshift bushings for my BMW ?

[@TreatsOnTheStreets]

They're nice! www.revshift.com

[@Ovadose850]

Thanks man I will check em out ! U da best ! Keep it up brotha

[@fitnesspoint2006]

Dope!

[@franciscoribeiro6223]

Better that new👏

[@gareth8816]

The green is really nice, I hope your Diff mounts last longer than mine. I only got about 25k miles and they started to knock around. But while there good you'll have a blast m8!

[@TreatsOnTheStreets]

Were yours polyurethane bushings as well?

[@gareth8816]

@@TreatsOnTheStreets Diff mounts from Revshift (green), I paired them with the red poly subframe mounts from AKG, that may have accelerated the wear though. The ear mounts would spin in place almost like they shrunk and the front diff mount was a tad ovaled and began to clunk, this is more likely because the bolt would loosen up so after repeatedly tightening the bolt the aluminum sleeve started to deform on the ends. I did do 1 autox season and I would drive enthusiastically rather often, normal M3 stuff, but when they were tight it was a blast!

[@TreatsOnTheStreets]

Were your diff mounts akg as well? I have akg bushings in my trailing arms.

[@Leondavies357]

Im missing the e36 videos! bring them back haha

[@TreatsOnTheStreets]

There's one coming later today!

[@Leondavies357]

Woohooo! cant wait man!

[@TM-fx5le]

Do not grease the outsides of the bushings???!

[@deplorabledave1048]

Rattle can paint on the subframe? Or professionally done? I have seen these things powder coated and that's what I plan on doing. Need to mask off where the bushings go, so no Powder Coating gets in there.

[@denisnovacek8428]

You forgot to mention what ratio is that LSD diff, if it has 25% or 40% lock and what was the reason you decided to buy new one

[@annabanna666]

man any chance u remember all the torque specs for everything please I cant find much on it

[@Alex-qn6no]

Where can i find this set of bushing ?

[@grendizer5439]

Hi... I have two questions 1- Can i use the same bushings with 97 BMW 318i ? 2- how much for the bushings itself ? Thank you

[@kadushagoldie9618]

Hi gm long tyme don't c no new videos how's the bimmer doing now yu do the upgrade ?

[@shortroundChris]

Not sure if I missed anything in this video series but did you do subframe mounting reinforcement or just the reinforcement for the rear swaybar? I really wanted to see how you would prep for the mounting points. Edit: most 95+ M3 had the floor mount reinforced. It was just the mounting tabs for the swaybar that need it.

[@TreatsOnTheStreets]

Since mine is a 99 and also an M3 I already had the reinforcement plates you're talking about. I believe in one of the videos I showed where they are and what they look like. If you are going to do your subframe bushings I 100% suggest doing those reinforcements if you do not have them. If you do not have them and the mounts have not already cracked, they will fail in time.

[@E36andE46vlog]

Looks FRESH! Question: Doesn't your chassie above your subframe cracks earlier now, because the "rubbers" are a lot stiffer the OEM once? The advised me OEM+ once at the dealer (rubber once with buses around them), and Powerflex cind of buses only for the track. Whats your thinking wise about this?

[@TreatsOnTheStreets]

Because it is an m3 it has the reinforcements. I've seen people run solid mounts on reinforced ones and never had a crack. Doesn't mean that it will never happen, just not very likely.

[@E36andE46vlog]

@@TreatsOnTheStreets Ok, I didn't know that. To bad I don't have a M3, so no reinforcements. I drive my E46 some harder then the E36, but also no cracks, maybe I go try those buses to. I heard the most G force comes in at the corners, so if you dont do to crazy on that it should break. Are your new buses go longer then OEM once (to replace)?

[@winstonpiddington4954]

Hurry up! Put in the six speed!!

[@hitman1268]

Bmw e36 world legend king carr love e36

[@gernnylornsxlor8603]

Are you using the oem washers for the subframe busing?

[@mariobros2867]

I'm currently looking into getting an e36 (it doesn't have to be a M car). My only concern is how expensive is a bmw to maintain and repair compared to a honda or toyota. I have about 9k to get one and repair it.

[@TreatsOnTheStreets]

Check out my videos on how to make a BMW last and also reliability. I think you'll find some good info on that stuff in there 👍

[@annabanna666]

bro how u get handbrake cables back in

[@masscomnet]

Did the poly bushings make your ride noisy / harsh? I need to do this as well and I'm not sure about poly - maybe 85a . .

[@TreatsOnTheStreets]

I did not notice any harshness from these but there is slightly more noise. If you are concerned then just go with the softer durometer poly.

[@masscomnet]

@@TreatsOnTheStreets thanks for the info. . . any squeaking problems?

[@TreatsOnTheStreets]

No

[@try4ever533]

🖒 hows the bushing? Any videos. Thanks

[@TreatsOnTheStreets]

This one was just uploaded yesterday. I will have the review video coming soon though!

[@aemalsaid3558]

hey bro where did u find the new hardware?

[@TreatsOnTheStreets]

Came with the bushings

[@M3Kiel]

What storage unit are you using? I can't find any storage unit that will allow me to work on my car.

[@TreatsOnTheStreets]

Currently looking for a shop... 😂

[@M3Kiel]

Treats On The Streets Alright Thanks 🙏🏽

[@Dildology]

What tool box is that??

[@TreatsOnTheStreets]

The big one against the wall or the small rolling one that the bushings were sitting on at the start?

[@Dildology]

The small one on rollers :)

[@TreatsOnTheStreets]

Haha it's one I got for free from ULINE at my work.

[@Ynotsm3]

Are these 80a or 95a bushing ?

[@TreatsOnTheStreets]

Revshift has info on their website on which hardness each color of bushings represent. I do not quite remember but I think they were 95a

[@bySumar]

Price for all of this excluding labor? :)

[@TreatsOnTheStreets]

What do you mean by all this?

[@bySumar]

Treats On The Streets Sorry I somehow ended up a few minutes into the video and thought you bought a new subframe with the bushings and bolts haha

[@MONSTERO7]

Any diff whine? If so how bad ?

[@TreatsOnTheStreets]

Check out my video "are polyurethane bushings worth it". I go over in detail the differences the bushings make, both good and bad.

[@sethgagodo6897]

Where can I get this in Africa am in Ghana

[@takumifujiwara8565]

@@sethgagodo6897 google it I'm pretty sure there's a supplier for you