Tri Five Chevy: 4 Door to 2 Door Conversion Part 3 (final)

[@davidcastillo2543]

Props to you for all the work you had to do, I had a donor 2 door sedan 56 that I chopped to make my 55 a 2 door and I still struggled

[@callmenortnortin467]

The best 4 door to 2 door tri 5 conversion I've seen on You tube yet. Nice work!

[@jonandrew52]

Nice welding job.

[@LovettSpeedShop]

Thank you!!

[@punkinsgarageandpaint8299]

Glad i found your channel! I like the way you and DD SPEED SHOP explain stuff. I hope you do more of these conversations. Some folks get tired of stuff like that but the more you do the more things you'll find that make it easier and you'll share that with us

[@LovettSpeedShop]

Absolutely thank you very much. I do my best to explain the way I’m building it. Merry Christmas to you and your family.

[@jack002tuber]

Excellent metal work. I don't think the door gaps from factory were this tight

[@LovettSpeedShop]

Thank you very much. I’m pretty sure the door gaps were little bigger from factory. More to come thank you for your support.

[@larrybush3630]

Yuor doing great . I just watched my first video . wish you Lotsa luck with your work and you channel . I'll keep watching I just gotta see how this turns out . oh I missed your live feed by 2 days . maybe u will Do another sometime .

[@LovettSpeedShop]

Absolutely thank you for your support. There will be more to come soon. We will be going live on Christmas Day and 7pm est if you get chance to join. Typically every Friday night at 7pm for lives.

[@cmac956]

Hi, you do very good work. I've watch your video's , I will finish the series thank you for the look in.

[@LovettSpeedShop]

Absolutely thank you sir!! There will be more to come.

[@IronheadGarage]

Coming along nice keep up the good work👍👍👍

[@LovettSpeedShop]

Thanks man!

[@Nova.1971]

Well done once again.....it's a lot of work but you make it look pretty easy!!!!

[@LovettSpeedShop]

Thank you! Patients is key lol.

[@josealfredocuevas]

you do excellent work and you say you never done it before you're that you're not a professional welder. I've watched a lot of these conversions and you do very good work compared to some of the pros you do very very good work keep up the good work I can't wait to see it as it's going along take care... Jose

[@LovettSpeedShop]

Thank you very much! I’m definitely not a professional, I am taking my time to make sure I do the best I can. I’m learning as I go with this car with different techniques that I’ve never tried. Thank you for the support there will plenty more to come.

[@Ford33coupe]

I am enjoying your channel. Look forward to seeing your progress. Good job so far!

[@LovettSpeedShop]

Thank you!! There’s more to come soon.

[@davidselvenis5947]

Those two little patches around the window turned out excellent. Looking at the pieces, it's tricky to get it right. That profile around the window needs a smooth flow and it's very convincing to the two door post look. Good work!

[@LovettSpeedShop]

@David Selvenis Thank you I was very please with it. If all go that good I’ll be super happy with the build.

[@hankclingingsmith8707]

MAN DO I FEEL FORTUNATE. I HAVE A COMPLETELY STRAIGHT ROT FREE CAR FROM CALIFORNIA DESERT TO START WITH. ALL TRIM AND MOLDINGS. BOUGHT FROM 78 YEAR OLD MAN. CAR WAS SITTN 32 YEARS

[@LovettSpeedShop]

That’s awesome!! Great find.

[@LovettSpeedShop]

We will be going live tonight at 7 p.m!! Come check out what we've been up to!

[@larrybush3630]

Oh yeah I watch you on t.v not my phone , so I can't comment all the time . good luck dude

[@LovettSpeedShop]

Lol thanks. Your more then welcome to comment I love talking to everyone.

[@oldmanintheshopbuiltnotbou8726]

The 55 is looking good this is one of those projects that you can't get in a hurry

[@LovettSpeedShop]

Yes sir your definitely right. I’m doing my best to take my time to make sure that I turn out a nice car.

[@loganfelts4762]

How are you going to do the interior panel? Just put a stationary rear window in? Trying to decide how I will do this on an upcoming project I have.

[@LovettSpeedShop]

I have the inner skin of the door cut and ready to go back in. I’m not excactly sure how I’m going to do it yet. I’m definitely going to cut the opening for the back glass to tuck down in much like the factory on a two door sedan. That way once I get to that point I definitely have the option to put roll up windows back in it.

[@mikemyers755]

..Look's like you've done this before, keep up the good work!..

[@LovettSpeedShop]

Thank you sir! This is first time for a conversion.

[@teresa67factoid95]

Nice job. Lots of work, but in the end it's all worthwhile transforming an almost worthless 4 door parts car, into a valuable coupe.

[@LovettSpeedShop]

Absolutely! Having a blast building it also! Thank you for your support.

[@dansimmons1964]

Thanks for the content! I am wanting to shorten the bed on my 66 ElCamino, it just seems too long behind the wheel well. I don't think anyone has done it before, wish me luck, lol!

[@LovettSpeedShop]

@RustBucketResto - Dan Simmons Absolutely your welcome there will be more to come. I have bobbed the beds on Toyota trucks before behind the wheels. Shouldn’t be too bad to do! Just take your time with the welding to keep everything as straight as possible. You got it! Good luck

[@rustyrodgarage2686]

I have a 57 belair 4 door.i had the same problem when I pulled the stainless mouldings around the windows. The metal was Swiss cheese.out of all the 4 door conversions I have seen in you tube,you have taken the time to make sure the fit is right and took your time. Do you plan on putting roll up windows in the rear?

[@LovettSpeedShop]

Thank you I have definitely tried to take my time and do it to the best of my ability being I’m not buying new stuff to go back in it. I’m trying my best to hand make everything and use what I have. To hopefully use money towards the end of the build. More to come with that. Also I’m still thinking about the roll up windows I definitely plan too put them back in just not to that point yet. Thank you soo much for the support.

[@conniesaylor2504]

Were is your helmet

[@LovettSpeedShop]

Oh lol it was hanging on the rack when I was tacking the metal in. I did put it on to finish weld everything up.

[@lionelmandrakegrp.cpt.6396]

Dude!!! wear eye protection!!!