Trijicon RCR

[@w.w.9047]

The review I’ve been waiting for. You’re one of only a handful of optics reviewers I trust.

[@carbonking53]

What he does is not rocket science. You mount up an optic, shoot a couple thousand rounds with it, rack it off a post a few times, drop it a few times and see if it still works. No quantum physics required.

[@danahowerton9638]

The only for me.

[@Andino.]

Him and Honest Outlaw

[@rocc05rx8]

Gawk gawk

[@Andino.]

@@rocc05rx8 sounds like you have lots of experience?

[@vegeta420z]

Really glad Aaron put this on KZbin, hopefully he puts the RMR HD, on KZbin as well.

[@lowerspeedhigherdrag]

I hope so, I won't run an optic till Aaron is done with it

[@mattogle2582]

He is trijicon is still depressed and crying right now from the pic he sent them of this 800$ After he was done with test only reason it’s not up yet

[@joeprogar669]

It's possible the engineering behind the near flush fit rear lens makes it easier to quickly swipe any crud or mud away without it getting compacted on the edges. Great review.

[@ImperiumLibertas]

This. Shirt lint getting into the recesses of the optic is the main reason I want to upgrade. If I leave my rmr for more than a few days without wiping it the dot blooms like crazy.

[@nathanskupowski4726]

@@ImperiumLibertasreally? That’s strange, I have quite a bit of time on my rmr and I have yet to clean or wipe the lens at all, it the dot is crisp as ever

[@rifleshooterchannel208]

That’s how the early Navy contract samples of the Tasco Super Snipers had their objective lens. The idea was to be able to flick the optic to shed and beaded up water.

[@blindtrace7220]

I agree. The easier it is to wipe that rear lens, the better.

[@Osprey1994]

​@nathanskupowski4726 What do you do to keep crud down? I had an open emitter for 3 days and it was building up a decent amount of crud. EPSc has been much easier to live with.

[@texasranger24]

The only review that matters. The "not an industry standard" the whole industry lives by and has adopted. Good job, and keep the youtube videos coming.

[@rudukai13]

Lives *and dies* by. And for good reason

[@aahhronismyname8068]

So what ya mean... it should be a "life standard" cause we all know in life shit happens. Lol 😂 "if something can happen, it will happen" words my friend gave me when I use to work in automotive and diesel vehicles. Weird crap all the time

[@rodiculous9464]

Pretty sure they do internal testing way more extensive or at least most professional companies do

[@dads2006gt]

Have you seen The Honest Outlaw's torture test on this optic? If not , it's worth watching. He beat it up. That optic is what all others will want to be baring any longevity issues.

[@calebsyswerda]

"Unless you are going to space to fight the sun.." Thank you, Aaron.

[@aaronfarnsworth7653]

Space Force! Man your rockets! We're going to end this global warming once and for all! 😆

[@BronzeAgePuritan]

"The possibility exists".

[@essentialsurvivaltraining5767]

Thank you for coming back for us poor folks. Great video as always.

[@davidhartley6232]

Finally a Trijicon RDS fit for mounting atop an ACOG ❤

[@inlandbhsk8r]

……?

[@rustymacshackleford6276]

i'm throwing it on my vcog 1-8

[@gabemorris6692]

Thank you to Trijicon for bringing the burn down back to KZbin.

[@zyzzuschrist3410]

Thanks for putting this review out for free.

[@ridnthawave708]

Glad to see you back here for another review. Appreciate the time and effort you put into testing.

[@daveandrews5998]

I appreciated the effort when you posted the videos for free...and he still profited from that. However, when the only thing that matters is money, the reviews might still be good but no appreciation is necessary.

[@WanderingBobAK]

I simple thank you would be appreciated.

[@nhwarrior8777]

Thank you so much for testing the different lighting conditions on one brightness setting, this gets overlooked by a lot of people

[@evergreenrider]

Does it take a screenshot when you press both buttons simultaneously?

[@rich1958]

That is funny! You should get more likes!

[@bradleyduncan7351]

No. But it emits a signal so law enforcement can find you in case you’re not carrying your phone.

[@LaGGyXdm]

😂😂😂😂😂😂

[@GeauxRussGeaux]

The capstan screw is gonna go a long way to alleviate frustrations. Specifically the frustration of stripped heads galled threads, and finding the right size allen wrench 😂

[@Mrgunsngear]

🇺🇸

[@cadeinscho6339]

I have carried my RCR on my Chambers for a Month now. I do lock the dot intensity for sure. I love the big buttons honestly.

[@DoWork316]

I always appreciate your thorough test and reviews.

[@chiefro7]

Thank you for putting this one on YT!

[@fl_protection]

I’ve always said the same thing about the blue lens filter in some RDS. When you’re running drills, you don’t see any blue filter. You are just focused on the target and red dot. Great job on the review. 🤙🏼🇺🇸

[@esTaleCSGO]

I didn’t even noticed it until he addressed in the video lol,I’m not picky as long as it reliable and holds zero.

[@MrTylero28]

I am really impressed with the new trijicon lineup. Can’t wait to get the rmrhd and the closed emitter.

[@KB-1976]

Can’t blame ya, they are 5 years behind after all.

[@thegeth4293]

​@@KB-1976dont have to do it first, just have to do it best

[@KSN2019]

Can’t wait to waste $1700 😂. Just outfit all your pistols with Holosun and don’t look back

[@MrTylero28]

@@KSN2019 I’ve got the entire holosun line up already. 2x 508t’s 1x 509t a few 507c’s and even a 407c oh and one of the primary arms acss Vulcan 507’s. So….. needless to say. I already know what is out there and I carry one of my 3x rmr06’s every single day. I like holosun. They’re fantastic as well but I genuinely trust the trijicon stuff maybe it’s all placebo or some sort of thought process that really is unjustified but holosuns are on my fun stuff. Trijicon is on my legit stuff

[@Cortezuma]

Anyone complaining about price probably isn’t ever at risk of breaking an optic, but to anyone who the durability matters it’s worth the extra. And it’s like $560 for qualified professionals.

[@bozscaggzz7475]

Oh boy I've been waiting for this one. Thank you for releasing this one for the poors.

[@venomgt7299]

Always love when Aaron gives us some free content. I love my Holosun EPS Carry, so it's going to be hard to move over to Trijicon. Great video, anyhow.

[@Aa-ron22]

I’d stick with the eps they want way to much money for this if it was 400 I’d pick one up but not for 650

[@Aa-ron22]

@@jesserobinson838 I get it but they need to take the price down to tops 450

[@carbonking53]

​@jesserobinson838 😂😂😂😂😂 I've beat the hell out of three 509Ts and two EPS's and they still work great. Had three RMRs that all quit or had the battery flicker issue.

[@RLS_91]

@@jesserobinson838 goofball comment. Aaron himself has tested countless holosuns that all held up great. cHIneSe jUnk

[@usernamealreadytaken770]

Same I have a 508T and 509T on each of my handguns. I may switch to the RCR later but I will stick with my Holosuns for now.

[@abtcup]

Dang...that full auto looks brutal.

[@ShooterMedic1818]

very good on Trijicon in keeping that mount footprint! A+

[@agunther08]

Exactly what I expected, and I truly respect and appreciate your preliminary review. Thank you.

[@joker747A]

I will NEVER tire of the 500rd burn down playback speed 😎👍🏼. Great review, Sir! 🫡

[@132images]

Love your consistency and honesty.

[@jameslang1354]

Sell price $645. Thanks for the review. Can’t wait for mine Q4 timeframe. I buy Trijicon for the durability and their kickass warranty repair.

[@ajmauricio_]

What we’ve all been waiting for. Thank you!!!

[@JayDee25895]

Outstanding Review!

[@tommieboi707]

Thanks for the review. I decided to get the rcr. So far its a great little dot. Just make sure you use loctite on the threads

[@wcw2793]

I’m eager to get one of these to replace the RMR on top of my ACOG.

[@MarshallArsenal]

Thank you sir! Your knowledge and insight is invaluable to us!

[@ja0298]

Both of my glocks are milled for RMRs, so it makes sense to stick with that foot print. I’ll eventually get one to replace the 407c on my G19. The 407c doesn’t work as well with my astigmatism compared to the RMR on my G17. I looked through a 509t and had the same problem. My astigmatism just doesn’t work with their emitter.

[@joefeola7770]

I do appreciate your videos on KZbin

[@scubasteve743]

Aww man he’s back!

[@humble_free]

Thanks for posting Aaron. I ran an RMR for duty use for years but now carry a 507C for duty use bc I love the ACSS Vulcan reticle. No matter the angle of my presentation from a compromised position or stress level, finding the dot is almost guaranteed. I like closed emitters but don't trust the 509 due to fogging and internal moisture issues I've seen. Would be awesome if Trijicon & other manufacturers would do something similar to the Vulcan, especially in a closed emitter optic.

[@hurt1704]

I think we were lucky to get anything from trijicon.. 😂

[@jessegpresley]

the ACSS is a crutch and slow.

[@humble_free]

@jessegpresley Can be a crutch if you haven't put the time in without it but from a purely tactical perspective, it could be a lifesaver. i.e. if injured, presenting with off-hand, from a laying position etc

[@illestdomer2005]

@@jessegpresleythe beauty is that if you don’t need it, you don’t have to use it. If someone doesn’t have 10k rounds down their weapon, I am sure they will be happy to have that “crutch” if they ever need it.

[@illestdomer2005]

This is basically where I am stuck: I have a 507c green that I love but can see the value in a closed emitter but also really intrigued by the ACSS Vulcan (tons of other PA ACSS reticles). It sounds like the ACSS would trump the durability of the 509t, or are you just concerned with closed emitters in general? I was reluctant to get the 509 ACSS because it sounded like folks were having issues, but it didn’t sound like the 509t had suffered from the same.

[@prodby.jerm1]

I don’t hold near as much weight in anyone else’s reviews like I do yours, great work!

[@xjugganotx738]

Yup I’m sold. Going to get one mounted atop my TA02.

[@dancobin1985]

"People do drop guns." Yes. I dropped my Wilson Combat EDCX9 from chest height, on accident, and it landed squarely on the RMR. Good to go.

[@oso1165]

People who saw the t rex arms review on it where he was bashing optics reviews that have high round count or drop testing need to see what a REAL review looks like. Glad you put it on youtube

[@SS-tr5ru]

Once my dept gets our optic ready handguns this’ll be my go to

[@SS-tr5ru]

@@Rubeless promise?

[@rahealharisshabbir]

Always a pleasure Mr.Cowan

[@cd4playa1245]

That setup in the background looks sick.

[@SmokesKwazukii]

the only optic reviewer i care about

[@georgekirby3361]

Thanks for posting this here.

[@jsw4178]

Been waiting for your review, did not disappoint! Thank you!

[@chrispearce9224]

2:55 The one on the left looks sooo much better for pistol situations. The RCR looks 20% larger...which I wouldn't think would be desireable. I have no idea what the cost is but I'm looking for something more like the smaller one on the left.

[@leadsled213]

Both my pistols have the threaded bosses. I was curious if this would fit. Thanks for mentioning that right in the beginning. I'm happy the RMR footprint will live on. Still happy with my RMR Type 2s that I bought based off of your reviews. There is a Trijicon video showing how to torque these screws with an Allen wrench and a a supplied card that shows how much you torque is applied based on how much the wrench bends.

[@frogchaser]

dang that was a seriously quick burndown

[@dylanbond1627]

I just mounted an RCR on an Agency AOS slide. I had to cut the raised posts down a couple of mm and I had to use #4-40 button head screws instead of the capstan screws. I also had to modify the allen key for the button head screws to make it fit in the small gap allotted for the capstan screw heads. Finally, it took a very long time to screw in because you only get about 15 degrees of movement with each turn. It works, though. I used loctite and estimated about 10 in/lbs of torque. We'll see if it loosens up.

[@jaybreezy4711]

I know the majority of his video is on Patreon but I still don’t understand how this man doesn’t have much more subscribers. I watch a ton of reviews but I hold sage’s review with the highest regard. If it’s not sage approved then it’s not approved for me.

[@nathanzavala4288]

This is something I’ve been looking forward to. I have a couple of enclosed optics and I strongly believe this will replace 3 optics on my guns. Especially on my number one duty gun and my first edc that I always use and down the road get another for my second edc.

[@heathturnbow3922]

Thank you for this review! 😎

[@otterconnor942]

I think they should include an inch pound spring type torque wrench (like the old bendy bar and pointer torque wrench) to torque the screws. It's probably too easy to over or under torque the screws.

[@WearilyCorrect]

Thank you for posting this on here for us free loaders.

[@alexs1972]

Thanks for uploading to KZbin!

[@danieldelia241]

Great informative review. I understand Trijicon provides a torque guide for the capstan screws. I'm definitely going to try this optic out.

[@arcbun]

the elysium chemrail behind you is sick

[@robertfoote3255]

Just what we needed.... Aron's test! Now for the HD and I'll be able to make a choice!

[@MourningConstitution]

Thanks!

[@robbabcock_]

Good stuff! This is the first I'd even heard of this optic, very coo.

[@tedybear915]

Thank you Aaron

[@TheRealJeff984]

If there is a piece of gear that I am interested in, the first thing I do I check your channel to see if you have reviewed it. Another amazing and informative video!

[@Knight_of_the_Old_Code]

Thank you for this review. Good stuff...

[@levicummins7317]

Just waiting for the cloud pistol light review

[@eddiearchuleta615]

I was to for 3 years then I moved on

[@Tragic387]

Cloud pistol light isn’t even out yet. They’re in over their heads with pushing too many products at once

[@levicummins7317]

@@Tragic387 there’s rumors that they sent some out for testing but if it’s not better then the x300 or tlr lights what the point

[@polarisrustinpeace1797]

Thanks

[@f308gtb1977]

Thanks Aaron!

[@Handyman1911]

Great review, Aaron! Thanks!

[@jasondorman3739]

In regards to brightness levels, it is nice to have brighter dots for those who have eye damage from Optic Neuritis. Dots (light/color in general) are dimmer in my damaged eye vs my non damaged eye.

[@AlphaJulietBravo1]

I’m hoping Zev figures out something to work with their style of RMR cut. If not, guess it’s two RMR HDs for me 😂

[@chipott3705]

Basically what was expected. I would say look thru it, or better yet, demo before purchasing if you have an astigmatism. Some find that the bluer the tint and smaller the dot makes the dot appear more of a starburst.

[@dalewalters357]

Good job. Thank you!

[@rlm2010az]

Great video

[@westtexas3041]

Great video Aaron.

[@chrisb9478]

Performed as expected. It kind of hurts my ocd that I’d want to figure out a way to use an actual torque wrench to tighten those mounting screws with proper Locktite of course. 🧐

[@robrice4639]

Great review. Most of the negs you mention are being addressed by a new optic I saw. CUDA 795. New company I would love to see you review.

[@vincentwallace770]

If you use a 1/4” drive petcock socket and a torque wrench you can place a pin or Allen key in the socket and torque the screws.

[@calishark408_3]

Those of us with self diagnosed OCD appreciate this haha

[@vincentwallace770]

@@calishark408_3 lol. It would drive me insane if I couldn’t torque the screws.

[@AndWeKnowMedia]

Great video sir! Wish I could afford one of these. Could you possibly do a review on the Hex Dragonfly?

[@denisilyayev1878]

Didn’t even waste my time with other reviews until this came out.

[@christopherkey3488]

Would you recommend this or the P2 if you had to pick?

[@jaredplayer7]

I’ve been waiting on this one.

[@lithium1770]

been waiting a while for it.

[@superherosmith]

Great video! I have an RMR now and generally love and trust it. One concern with it, however, is that the glass fogs when moving from cold to warm environments. Does the RCR solve that?

[@MichaelLeopold1]

Helpful

[@brazzy1467]

Been waiting for your opinion on this Red Dot.

[@GeauxRussGeaux]

The entire industry has been waiting on this 👌

[@chaoticcaninejb]

😂

[@c-note4146]

You can use a torque wrench on the screws designed for this. You’d have to adapt a torque wrench designed for spokes on a small wheel. Anyone who takes maintenance for their dirt bike seriously would likely have a good adjustable spoke torque wrench in their toolbox.

[@ricktenter1631]

Great content, just wish I could support you on patreon. I miss the regular unbiased information. Thank you for this though!

[@wcw2793]

How do you like the RCR compared to the 509T and Acro P2?

[@rubeclayton8233]

Great Video.!!

[@WoodrowWoods2007]

RCR or Acro P2? I think that is what people want to know. I think it just comes down to footprint at this point

[@Cortezuma]

Buttons and objective window visibility go to RCR. Mounting system goes to Acro. Durability and reliability most likely to RCR.

[@TietLung]

I'd like to see how well it holds out moisture over time. That seems to be the main issue with enclosed models. Eventually they lose their seal and fog up inside.

[@tomahawk5118]

The big question, for me, is it made in China like some of their new scopes?

[@xCrimsonxTidex]

Hahahahaha! I love the fact you have a Chemrail prop mounted on the wall! Now we need an Elysium AKM.

[@trailertrashtactics]

I love that it takes a 2032. Most the other micro dots or enclosed emitters are 1620's or whatever other uncommon battery

[@TheWhiteHouseNuclearBunker]

Wait so it's the RMR footprint, but can't be installed if your RMR cut has the front posts?

[@daleburnett9935]

The recoil lugs are fine; it won’t fit for the RMR cuts that have the raised screw posts.

[@masonwilhelmy2613]

It specifically won’t work with the “zev posts” which are essentially little towers that sat inside of the screw wells of a traditional RMR, and then used smaller diameter screws to fasten it to the slide. Zev posts were supposed to give another 2 extra points of contact to the RMR footprint when mounting.

[@jwaffle42]

When will this be added to the white paper on the sage dynamics website? I'm curious to see if it ever failed after more testing.

[@FreddyTheS]

I’m sure he’ll update it next year. Since 2024 isn’t over yet. Im waiting for it too

[@lithium1770]

i just hope it doesnt fog up ever

[@practicalcivilian3259]

This looks sweet but I wonder would it work on my chambers custom RDSM?

[@scottmeuselbach5806]

😂

[@Flipalot]

Been waiting on the hd review this is a win for me too🥴