Electrolytic Gold Recovery From Gold Plated Pins | Electrolysis Method Gold Recovery |

[@almostthere2516]

Ok, I failed chemistry and physics so this is magic to me and you sir are a wizard! Thank you for showing us how you do it!

[@makdhetopenktriwijoyo6377]

Saya dari indonesia.. trima kasih sodaraku.. walaupun saya baru melihat vidio anda sekarang. Salam persaudaraan dari saya 🙏🙏🙏

[@Muskratt5150]

"Be careful when handling the acid. Wear croc shoes and pj pants for safety"

[@shaneyork300]

I'm glad you showed us a closer look at the album.

[@TrinityGoldRecovery]

😘😘

[@k.r.f.j.b.8144]

Hi my friend, wanted to let you know that in my similar set up instead of having to pour the gold/h20s2 mixture in the funnel and risk splashing or spilling some of the gold laden liquid, I made a hole in the bottom of my beaker and put a small magnet with a silicone ring on the outside perimeter of each magnet on either side of my container to form a water tight seal. When the time comes to transfer the liquid to the funnel and water bucket all I do is lower another magnet I have attached on a copper rod down to the magnet inside the gold mixture, it attaches itself to the top sealing magnet and I’m able to slide the magnetic seal to the side and let the gold liquid seamlessly transfer into the water bucket with no chance of losing any gold. Thought you may want to try this method yourself :) just a friendly suggestion to a fellow scrapper!

[@TrinityGoldRecovery]

Wow😍😍. Gotta try that. Thanks buddy 🤗

[@CARLOSCESPEDESbiocihealth]

Good comments

[@faroukmakubuya8121]

I need to know where I can buy a 12 volts power supply

[@thienledinh6316]

great and very helpful video, thank you so much for letting me know about GOLD. thank

[@حيدرالعراقي-ف7ه]

Does the copper electrode come down to the bottom of a pot or does it stay attached to the thing?

[@shamandesmith538]

So you roughly recover $210 worth of gold at current babe price how much did you spend for the pins?

[@건강지킴이-l2u]

Great work~!!! I wonder how you deal with the chemicals you used. Is it reusable or disposed of?

[@electronbay5]

Hello sir, can I use sodium carbonate instead of Urea to neutralize acid then stump out ?, thanks

[@mgomez91792]

What is it that you’re using to rinse out your filter cup is that regular water. This is my first time doing this.. I have at least about close to a pound of mixture of goal plated metal gold plated pins and some full gold pins, And on another pot I have motherboards that have gold on it and I have those in pieces but remember it’s fiber can extract gold from that using your method electro

[@TrinityGoldRecovery]

It's regular water

[@Metaldetectiontubeworldwide]

Cool i'm Just started stripping all my found goldplated rings, chains and brachlets ,while metaldetecting . Subed directly , very informatie thanks . Grtz johny geerts

[@TruthHurts.SimbaTheAfcnPrnc]

Thanks a lot for your video I'm interested in doin this..may u kindly list all the materials I require for this process and suggestions of where I can get gold plated pins😊 Thanks in advance. I'm located in the USA

[@TrinityGoldRecovery]

Contact with local scrap yards

[@michaelstark9939]

You can get gold plated pins off of a bunch of stuff!! Lcd/led tvs, cell phones, pretty much any electronics nowadays have some.. not all electronic, but most, in my opinion, will have some gold somewhere.. you want the mother boards specifically.. and then theres the capacitors an such, if ya can get enough of those babys, oohhh boy 🤑🤩🤑 haha

[@aliouabdoul9394]

Alí from cameroon🇨🇲 thank very moch

[@TrinityGoldRecovery]

❤️❤️❤️

[@aligohari6335]

@@TrinityGoldRecovery ش

[@lijojose1264]

Hi

[@angelitosaquilan9036]

Midjo natutu na ako sa nga video mo, salamat..

[@venmax1]

Hi champion thanks for your videos ,it exists me to try can you please guide me easily . I am a new starter and how do you discard the used chemicals.

[@5667736]

What is the container you poured H2SO4 made of?

[@TruthDigest]

Hello, I want to know if the electrolysis will pull off only the gold layer or it can pull off some base metals and then we will get a gold contamination? thank you for the efforts and information . Samir from Algeria .

[@الذهبفيمصر]

الذهب من واحد ونصف فولت الي حد أقص ٤ فولت

[@MetalRefining]

What if I use a pan made of pure clay to store the H2SO4? can you do it sir?

[@حيدرالعراقي-ف7ه]

Do you leave the solution until a second day or do you filter it at the same time?

[@lanceuppercut8220]

That's a really cool technique, I figured there had to be a way to recover gold via electrolysis. Any chance you're from Agbogbloshie?

[@Vibe77Guy]

The drawbacks are you have to constantly stir up the pile to combat the Faraday cage effects, in concentrated sulphuric acid that is trying to get hot. I've found it easier to use dilute sulphuric acid and digest the base metals instead. Use a titanium anode and an Anode bag and you can still recover the gold as foils.

[@michaelstark9939]

So a piece of titanium and whats an anode bag??

[@Vibe77Guy]

@@michaelstark9939 An anode bag is just a filter bag surrounding the anode. It captures the material not dissolved in the process.

[@faroukmakubuya8121]

Thanks very much for the excellent video I would like to know where I can buy the 12 volts power source with 220 volts input

[@TrinityGoldRecovery]

You can use IPS power supply...

[@matthewmctaff2022]

Amazing video, just wondering if you haven’t got a sprite can you use Pepsi.

[@romanvitomskov5199]

Здравствуйте. Подскажите! Какие выставляли параметры V?, Am? ???

[@VishnuKumar-ik5we]

Do acids are cheap or not? And Where did you learned these all recycling techniques?

[@TrinityGoldRecovery]

Acids are cheap

[@puraniyade]

Sir this video is so help full nice How to use sodium carbonate

[@patrickmchenry5525]

Excellent video. I’ve got great tips from your channel and look forward to finally processing all my different components from my “hobby”. With all the weights I have, I may actually end with 2 Troy ounces of gold! Thanks for all the info!

[@relaradu8928]

T

[@maximalinchanel6312]

VZm

[@jerrydavis7130]

Do you denox pregnant solution before dropping gold with smb? If so, what chemical do you use for denoxing? Thanks for nice video.

[@TrinityGoldRecovery]

Urea

[@fazzarayhanalfaridzi3097]

Hello sir are you do de Nox with urea before reduction it with sodium bisulfit solution in this vidieo..or you de NoX with evaporating?

[@TrinityGoldRecovery]

With urea

[@storieefoto]

On another channel I saw about 40 grams extracted from 1.2 kg of pins. it's possible?

[@TrinityGoldRecovery]

40 grams of gold?????!!🤔🤔 I don't think so!

[@OwlTech333]

@@TrinityGoldRecovery how about 52g Au from 1.27kg?

[@TrinityGoldRecovery]

Thanks buddy for your comment!!! May i know what types of pins you are talking about??? 🤔🤔🤔

[@TruthDigest]

hello, is the concentration of sulfuric acid is 98%, or it diluted , thank you for you videos .

[@TrinityGoldRecovery]

Yes, 98% Welcome....😇

[@parttimelover3297]

Is this applicable on dirt containing tiny or what they called water gold

[@kayllenstarships9009]

Hello can i only do some steps here not all,will that clear all non-gold material?

[@araviatebas6793]

Reciclar vários aparelhos pra conseguir essa pepitinha?

[@jogindersehgal7872]

Can we use magnet anode & cathode because no acid can react on it I can easily pass current from magnet

[@MuhammadNasir-bj1bh]

Im like your tutorial it is simple

[@sunilsangit5619]

Good Afternoon Sir, Chemical or Electroplating! Which is more profitable???

[@TrinityGoldRecovery]

electrolysis

[@LuisGonzalez-ll2zd]

Posy compa pero enque consentracion esta el acido sulfurico al 10%

[@جعفرشیرزاد-ت9و]

Hello, can we use a plastic container instead of granite?

[@TrinityGoldRecovery]

No, heat will damage the plastic. You will use a heatproof scientific glass pan. You can get it at any scientific store.

[@hectortello9226]

Wooooow... Hi sir..is exvellent your vídeo. I from México... Congratulations for you channel Very good my friend

[@TrinityGoldRecovery]

Thanks my friend

[@AsifHussain-vx9ws]

Great video again. It's fantastic you shows different ways to obtain gold from ewaste. Just a quick question. Can you use this method with gold pins that have lead/tin solder. Will the solder cause any problems?

[@TrinityGoldRecovery]

You can do that There will be no problem

[@eugenemendoza6337]

@@TrinityGoldRecovery can i use battery acid? Thanks bro

[@sanjaysmedhemedhe8229]

Sir I so liked your experiment I also doing few experiment

[@chafikmondial]

Working in this ferrous fugitive?

[@recentnihalofficial]

Bhai last me sodium carbonet kiu mix karte hai..?

[@TrinityGoldRecovery]

It Helps with the melting process

[@PoorMiners321]

wow nice job sir congratulations..

[@TrinityGoldRecovery]

Thanks

[@amkoshesh6205]

I want to remove the tin from the electronic board and use it again. Can I use hydrochloric acid? I do not want to harm aluminum

[@TrinityGoldRecovery]

Yes)!

[@indahayudaratistacantik9937]

Why you not using urea before SMB?

[@TrinityGoldRecovery]

Not necessary

[@karimrazak3798]

Does nitric acid react with gold when it is dirt?

[@brentsmith981]

What kind of respirator did you use? Whats your cost to profit ratio?

[@TrinityGoldRecovery]

I've a military grade respirator, but I don't used that, because acid fume doesn't protect any respirator, I guess only spacesuit can protect me😂 I uses I table fan from opposite side of my work banch, and I stay fur from fumes

[@جعفرشیرزاد-ت9و]

Did you connect the negative to the lead or the positive?

[@TrinityGoldRecovery]

Unfortunately, due to a technical error, the power supply's electric wave was being interrupted, so I repeatedly tried to fix the electric wave flow by swapping the anode and cathode ends.

[@جعفرشیرزاد-ت9و]

Hello, how many amps and watts is your power supply, thank you

[@TrinityGoldRecovery]

12volt 8amp and 25watts

[@chunhunliu2641]

Can these acids be reused?

[@TrinityGoldRecovery]

You can reuse the sulphuric acid

[@sarowarbd]

What is specification of your dc power?

[@narz5869]

How much does it cost to process and how much money can be made from sales

[@romanosalkanovic9561]

È un ottimo risultato per ora gatti ti ci vuole tutta l'industria a farlo

[@johnwaltersalas93]

Sir I have an alloy of 50%silver and 50% gold, can electrolysis remove the silver on the surface and make it appear to be 100% gold?

[@TrinityGoldRecovery]

you better apply the aqua regia method

[@DonsPetualang]

If you use a battery charger, can it or not?

[@TrinityGoldRecovery]

12 volt and 5 amp battery charger will do this process.

[@DonsPetualang]

@@TrinityGoldRecovery thank for your info 🙏

[@hayderalkhafaji8408]

Great job sir, what is the concentration of sulfuric acid, thank you

[@OmSoHum7467]

96%

[@muhammadmaaz5796]

@trinity gold recovery?? How much current (amperes) have u provided, can u tell me.?

[@TrinityGoldRecovery]

12v

[@muhammadmaaz5796]

@@TrinityGoldRecovery yes ur giving 12V but how much Amperes it is taking????

[@OmSoHum7467]

@@muhammadmaaz5796 10amp

[@merdaslian9606]

hello, what kind of alloy is the container in which sulfuric acid was poured?

[@TrinityGoldRecovery]

It’s an old antique made out of stone. You can use high quality beaker.

[@merdaslian9606]

@@TrinityGoldRecovery 👍❤

[@tahircamalanoglu]

how much gram did you recover so far

[@TrinityGoldRecovery]

Haven't kept a record 😅.

[@tahircamalanoglu]

@@TrinityGoldRecovery any guesses 🤔

[@a78011a]

works with salt + H2O ?

[@rajumedida9683]

Where you buy the chemicals please tell me sir

[@TrinityGoldRecovery]

Search online where is the chemical stores near your location.

[@coreygold1923]

Can u please help me. I really need to get small crucibles like that. Is there anywhere I can buy them?

[@OmSoHum7467]

How can address you, let me know please...

[@OmSoHum7467]

@@coreygold1923 see your mail... And please delete your email address in here from public place... Thanks

[@SanjayPatel_watch.videos1]

[phone]

[@shaikh2502]

Can we remove from micron watches

[@6980869]

dang that looks like a LOT of work for a few grams. Thanks for sharing

[@سیدجلیلمیرکاظمنژادفروهی]

استاد سلام درصداسید سولفوریک چقدره واینکه سرب توسط اسید سولفاته نمیشود

[@CARLOSCESPEDESbiocihealth]

Good job.

[@zoyajabeen8197]

From wre u get tht bowl?????

[@RubenHernandez-nz6fv]

Hello, what do you use sodium carbonate for?

[@TrinityGoldRecovery]

It helps the gold to stuck together while melting

[@cabulingue]

it was 12Volt dc and what amp you use on that tools. regards

[@OmSoHum7467]

10amp

[@jimtroupes]

Great content !

[@chethanchethan4110]

which acids contain liquid solution

[@GKKnowledgeMarathi]

Can you tell why the dust turns brown when you process, why it turns black when we process?

[@OmSoHum7467]

Pure gold dust mostly looking as brownies colours... If small amount of others base metal with gold sediment, it looks black...

[@toomuchdebt5669]

Might be copper oxide.

[@pradeepchaudhary5996]

hello trinity big fan here!!!! i love watching your videos.... i have a question bro do you use earthen lamp(deepak) as crucible?

[@OmSoHum7467]

Nop... It’s only crucible, just one time crucible use for.. Made by mud clay. Not dewali crucible like as...

[@pradeepchaudhary5996]

@@OmSoHum7467 one time crucible? what price it comes with?

[@OmSoHum7467]

@@pradeepchaudhary5996 100 pcs price $5 us dollars

[@MuhammadGafur-x2h]

Good master❤

[@TheAxeljones2012]

congratulations!!

[@TrinityGoldRecovery]

Thank you!!

[@alexgomez-rc5nt]

Can I use any 12volt like battery or charger

[@TrinityGoldRecovery]

you need 12V and 15amp DC current..

[@alexgomez-rc5nt]

@@TrinityGoldRecovery got it thank u

[@joelconceicaogoesdemelo1478]

Com borax também da certo ou metabissulfato de sodio

[@antoniotrepistole1383]

Hello amigo another excellent video thank you. Please tell will this process work on high grade pins with thicker plating? Am I correct in thinking you live in the Phillipines ?

[@OmSoHum7467]

Medium high grade gold plated pins from old nokia charging ports...

[@giorgosxyrichis3630]

M8 you are pro !!! grade job and in electrolysis! !! 100% professional 💪👍👌❤❤ . Witch method you prefer electo or acids? ?

[@antoniotrepistole1383]

@@giorgosxyrichis3630 I got 400g of what I thought was military grade pins under hot nitric and distilled water for two days now. Used up over 1 litre 68% nitric acid costing a fortune with acid and electricity for the hob and fume hood. Don't think this is the way to go. That's why I asked the question.

[@giorgosxyrichis3630]

@@antoniotrepistole1383 m8 I put 300 gr low grade straight in a.r. + h2so4 without electric stove or fume hud I'm in 3rd day and almost they done . I will not w8 to dissolve all the copper just free the foils and if some gold go HCLau witch it will go 100% I will collect from waste container dy put some hitsing gold playted from premium 4 !! But .. that's my way your way maybe its better !! Electro maybe it's the chiper way but maybe is more time consuming ?

[@chosen1one930]

Always use a glass thermometer to make sure the acid doesnt get to hot. Is that cast iron?

[@TrinityGoldRecovery]

Okay😊😊, Thanks Buddy

[@Avocado818]

Do you sell gold?

[@arvindprajapati1488]

Sir please tell the strength ( power) % of HCL and HNO3 which you you used in AR solution please.

[@TrinityGoldRecovery]

38% HCL and 78% HNO3

[@bodybuildinglegends2902]

I want start e waste recycle bussiness. So can you guide me for estashblish in it?

[@TrinityGoldRecovery]

follow our web page on blogspot.com, you can got an idea there, how to start business ... just go our channel about, we indexing our web page

[@avleshvarshney5679]

Bro how much u pay for this process

[@jafsent30]

Please make videos of those gold plated network boards

[@TrinityGoldRecovery]

Coming soon

[@davejanovec6169]

Wear does all the copper . Led and pink go

[@sherifaly1017]

Very wonderful work my friend 🥇🥇🥇

[@TrinityGoldRecovery]

Thanks

[@RubenHernandez-nz6fv]

hello, how can I build a crucible like the one you use🤗

[@TrinityGoldRecovery]

It’s made out of clay.

[@zinzintrucs]

Super boulot bravo.

[@قلیپور-ش5ح]

سلام برادرمن ایرانیم کارشان عالی است ولی موادی که بکارمیبره نمیدانم چه موادی هست میشه موردش برام بفرمایید متشکرم🙏

[@chosen1one930]

It wont filter properly unless you double the solution in volume with Ice, the solution wont get to hot with the ice than the gold sludge will sink to the bottom

[@TrinityGoldRecovery]

That's a good idea❤️

[@toomuchdebt5669]

Its better to use a fine mesh copper basket. Less messy.

[@TrinityGoldRecovery]

Yes

[@andrewferneau8720]

Does it have to be a lead cathode? And does it have to be a copper cathode?

[@TrinityGoldRecovery]

Lead cathode

[@andrewferneau8720]

@@TrinityGoldRecovery thank you!

[@nagmameraj1329]

Sir, we can also come out copper

[@nagmameraj1329]

i meant silver

[@hectortello9226]

Excellent

[@TrinityGoldRecovery]

❤️❤️

[@RubenHernandez-nz6fv]

Hello, how pure is sulfuric acid for electrolysis

[@TrinityGoldRecovery]

It’s industrial grade acids. Not so pure! The concentration is 94-98%

[@RubenHernandez-nz6fv]

@@TrinityGoldRecovery thank you 🤗

[@karimrazak3798]

Is the same way with rocks that hold gold atoms

[@TrinityGoldRecovery]

There's a video coming keep an eye on our channel bro😊😊

[@karimrazak3798]

Thank you very much.

[@karimrazak3798]

@@TrinityGoldRecovery Do you initially grind the rocks well

[@ilikechamp3086]

8개월된 영상 😀 👍

[@YTpriadi]

Elektro wining berapa vol?

[@TrinityGoldRecovery]

12 vol

[@YTpriadi]

pH?