Рет қаралды 35,942
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/166/9...
This video shows you how to install a thermostat housing on your 2008-2012 Honda Accord. The thermostat housing holds the thermostat, which regulates coolant flow in your vehicle's engine. If the housing is damaged or leaking, that can cause problems.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/obE/1AX...
• 10mm Wrench 1aau.to/obI/1AX...
• 10mm Socket 1aau.to/ofG/1AX...
• 12mm Socket 1aau.to/ogB/1AX...
• Coolant Funnel Set
• Trim Tool Set 1aau.to/obZ/1AX...
• Needle nose pliers 1aau.to/oaI/1AX...
• Needle nose pliers 1aau.to/oaI/1AX...
• Pliers
• 1/4 Inch Socket 1aau.to/oh/1AXA...
• Ratchet 1aau.to/ohj/1AX...
• Socket Extensions 1aau.to/ogB/1AX...
• Swivel
• Torque Wrench 1aau.to/od8/1AX...
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oaC/1AX...
• Drain Pan
• Pick 1aau.to/oa9/1AX...
• Rubber Mallet
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.