√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@toastyghostyofdeath3909 Жыл бұрын
What do you do to remove the lock cylinder if the key won't turn to the start position? Because thats the reason im replacing it.
@frankschwartz74052 ай бұрын
Thanks for the explicit tutorial. It would have taken much longer, or been a complete "fail" without it. I never would have found that torx bolt in the top plastic, it fought me hard coming out....now it's an "extra part". The tumbler also put up quite a fight, but after many invectives, I finally prevailed, and then with much celebration. The new one slapped right in, and reassembly was a breeze. Just like new. Thanks again.
@nealbeach49473 жыл бұрын
Just finished a 2000 S10 and this video was a great help. No issues at all just took it slow and followed the instructions.
@TRQ3 жыл бұрын
+Neal Beach Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@dewaynedurham92582 жыл бұрын
Not to split hairs but you might want to go try and take apart a 95 s10 and see that you should adjust your parameters cause the old dash is way different and has a full circle around the ignition on the top part of the column
@sped6954 Жыл бұрын
I'm down to that part about removing the old lock cylinder. The video says to turn the key while holding the lock in the start position and pushing down in the hole that was created when removing the connector around 3½ minutes into the video. The whole reason for changing it is because the lock wont turn at all. I put the key in, the door open chime sounds, and nothing. It wont turn in either direction.
@christopherworkman9070 Жыл бұрын
Nice, detailed video! I love that it shows in-depth how to take the dash and steering column apart. 👍
@Tony-dz6yf2 жыл бұрын
This is a great video i just finished my 2000 Chevy Blazer only issue is that now i have to keep both keys one to access entry and the other to turn on lol better then where i was originally 👍🏽👍🏽👍🏽 thank you for your videos
@jrbinkard19002 жыл бұрын
This is the only video showing how to twist the inside with screw driver to align cylinder Thanks
@trevorpritchard29852 жыл бұрын
Been beating my key with a hammer to unlock the ignition along with a whole lot of jiggling things around lol thanks for the video!!
@aaron5522 жыл бұрын
Thank you so much for this detailed video, I was able to change out my ignition in 30 minutes, and I am not car savvy lol. You saved me money by doing it myself much appreciated!
@donlance9574 Жыл бұрын
Great video. Would've never thought to have removed that small white connector/pin nor figured out where to push to get it released without breaking it. I did do a small deviation to the procedure in that instead of trying to remove all the electrical connectors ( I have 2wd) from the bezel I just pulled it out/away and Bungy-corded it to the rear view mirror. I did so because I previously had trouble removing the airbag switch which was brittle and broke some tabs so glue was holding it in place and I didn't want to disturb it.
@dizzyassklown4424 Жыл бұрын
I replaced my ignition lock but i didnt have to take off the dash bezel...
@pariahsogodly3 жыл бұрын
Hey, currently trying to do this repair on my 2000 zr2 since some tweekers cracked the ignition when they stole it… only issue is that my old cylinder is locked into place, how should/could I go about removing that without damaging anything else?
@williamrice29763 жыл бұрын
That's the same problem I have
@jaredadams7312 жыл бұрын
Some probably here. Except the got the cylinder loose and know it’s hanging down from the wires and I’m not sure where to go from here
@davidjoeseph26462 жыл бұрын
Have to remove the wheel and a bunch of stuff
@tylerseitz6337 Жыл бұрын
What about the 1994 S10? Same equipment. Different interior. My steering column is one piece. Im pretty sure i have to remove the steering wheel to get to the source. Any tips or tricks?
@G-spotGeorge Жыл бұрын
This is how you do it on the pre facelift models 1. Remove plastics on top and bottom behind steering wheel 2. Turn key all the way then push the tap down while pushing out on the old cylinder 3. Once you get the cylinder out a little ways pry on it with a flathead or something while removing whatever you used to push the tap down with in step 2. 4. Once you have the old one out reinstall top and bottom plastics 5. Insert new cylinder and turn key back to off position and you're done
@DragonsGarage2 жыл бұрын
You guys are awesome, thank you!
@seangorham56262 жыл бұрын
I just watched your video and dam a video that actually helps thank u.
@joesheppard8000 Жыл бұрын
GREAT video thanks for sharing
@Artemis03Lian Жыл бұрын
what is the tool for the inverted torx bolt?
@everywares60102 жыл бұрын
How can I remove the key switch if I can’t remove the top cover... my top cover is actually wrapped around the key switch. I can’t do it in the order you did. I have to pull out my key switch first to remove the top cover.
@JimmyEatWorm2 жыл бұрын
Hello bought part, do I have to reprogram after installing?
@Tyler-b6g2 ай бұрын
What size inverted torque bit was it?
@erniesanchez486011 ай бұрын
Is there seniors in there that would cause gauges and blinkers not to work? Reason I think it is because my gauges aren't working and my blinkers aren't working. Beeping sound like key is in the ignition but not turned on and battery light. Battery and fuses are good
@TRQ11 ай бұрын
+Ernie Sanchez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@immapopcha Жыл бұрын
I have a 2002 sonoma and lost my keys. Any clue what choice I have if any? I need help lol
@sprayarm Жыл бұрын
Do you not have to disable the airbag?
@josecortes63852 жыл бұрын
What i do my truck was stolen and I can’t take off the switch any recommendations??
@MadMax-yq9ix2 жыл бұрын
Might have this problem with my 2000 chevy blazer 4 wheel drive I'll update if it fixes it
@fivenightsatgoldenfreddys49122 жыл бұрын
Cam you use the stock key if you replace the cylinder
@garyhawthorne16782 жыл бұрын
what size is that tork head
@danakibby6272 жыл бұрын
Great video
@tinyboii428613 күн бұрын
Can someone help me out please i just replaced it but the keys the came with the cylinder doesn’t come out
@craigscott3225 Жыл бұрын
I have a 1996 GMC Jimmy / Chevrolet Blazer. This video shows trim that is not like mine. It is not like the neighbors blazer or pickup either.
@antlil4545 Жыл бұрын
what do you do if your ignition won't lock in place to put the new key cylinder in. please help
@williamrice29763 жыл бұрын
U should do one with no keys problem
@kennyboy62842 жыл бұрын
Thanks for the help
@alexmajor65792 жыл бұрын
My key won't turn at all so how do I replace this without placing the key in the on position
@calvinballew54112 жыл бұрын
Good question. I have the same problem
@alexmajor65792 жыл бұрын
@@calvinballew5411 hey dude don't know if you've found a fix yet. I ended up replacing the entire ignition lock assembly housing on mine. I followed a video on KZbin called " 02 chevy avalanche ignition case replacement procedure - passlock fix" I bought the housing and a new tumbler with keys as well as a steering wheel puller and a plate and a steering collumn compression tool to remove the lock ring. I used the part number for the adapter plate is J-42137 K-M USA just Google that and it will come up. Any steering column compression tool should work with it. As well as any steering wheel puller with spots for opposing bolts
@alexmajor65792 жыл бұрын
@@calvinballew5411 you have to remove the airbag and steering wheel as well as the shrowd around the drive shaft that video had every thing I needed once I had the tools and parts. Hope that helps you or whoever else sees this
@cinos785793 жыл бұрын
What is the small harness at the 4 minute mark? In my vehicle it is not there and the wires are on the other side of the column cut and taped together.
@SIMPLYME-bu1me2 жыл бұрын
What size torx driver is used under the steering column to take those 2 mounting bolts out? Thanks
@SIMPLYME-bu1me2 жыл бұрын
I am going to answer my own question. That takes a T25 driver.
@robinfreshour73882 жыл бұрын
What if you don't have keys
@aaroncalhoun97133 жыл бұрын
I changed mine and the lock doesn't retract brack after cranking it, I have to pull it back slightly so it isn't in full cranking position... any suggestions?
@young1macdaddy3 жыл бұрын
Straight to the point
@TRQ3 жыл бұрын
+young1macdaddy Thanks for watching our video! 1aau.to/m/Shop-TRQ
@patrickcahilljr83842 жыл бұрын
YOU HAVE TO DISCONNECT THE BATTERY AND TURN THE KEY ALL THE WAY FORWARD ( TO THE CRANK OVER POSITION) AND PUSH IN THE WHOLE FOR IT TO COME OUT...IT EILL NOT COME OUT ANY OTHER WAY
@gregtaylor84142 жыл бұрын
What if I put the new cylinder in and didn't tighten the snug and screw and it turned backwards passed auxiliary and stuck
@tjhulsey58373 жыл бұрын
Very Good Video... Well Done...
@timothyhines76972 жыл бұрын
I appreciate it real good video
@gustavomarin76802 жыл бұрын
What if my steering wheel is locked and can’t get it to loosen so that I can turn my key over ?
@ladonnagauchat64282 жыл бұрын
Jiggle the wheel while trying to turn the key
@yousuckdicks1 Жыл бұрын
did you get it figured out? I have the same issue after a break-in
@danielholguin27403 жыл бұрын
Is this the same with the Manuel’s?
@TRQ3 жыл бұрын
+Daniel Holguin This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
@cyranoburleson42402 жыл бұрын
Thanks man
@luisparamo94023 жыл бұрын
How can I removing the cylinder lock if my key will not turn too be able too remove cylinder
@pjwoo2762 жыл бұрын
same prob. I guess no one knows. I have asked same question 6 different places. no answers
@andresespinoza99612 жыл бұрын
@@pjwoo276 gonna have to call a locksmith to remove it for you.
@timthemechanix2 жыл бұрын
1996 is different. the cover does not split around the key. the top cover goes down and around the key lock.
@wendyream23603 жыл бұрын
Great info
@anthonysolomon98913 ай бұрын
Thank u
@billyhogan1863 Жыл бұрын
So what if you don't have any key's and still need to replace the switch????? I guess just replace the column
@ronsmykowski78502 жыл бұрын
Why can't you drill a hole about where that pin is and stick a coat hanger in and release it and not have to go through all that extra work.
@daltonwood8294 Жыл бұрын
What if I can’t turn my key at all
@DwayneRamey-e3q Жыл бұрын
94 to 97 total different!
@lauraluna27393 жыл бұрын
I changed the cylinder ignition switch on my 2000 Chevy Astro and it still won’t start. The panel won’t register.
@big6pun072 жыл бұрын
Any luck yet
@anthonykeeler8814 Жыл бұрын
94 GMC Sonoma is way different than that
@pjwoo2762 жыл бұрын
Can someone refer me to a video showing how to replace door lock cylinders on 2003 chevy S-10 ?
@ladonnagauchat64282 жыл бұрын
Google
@HansZuerner9182 жыл бұрын
how to reset ignition switch
@jgonzalez8250 Жыл бұрын
Friends?! Calm down Ross.
@joemorriosn3761 Жыл бұрын
what if you don't have a key ?
@kelleykayschmidt69022 жыл бұрын
Education
@charlesfischer450 Жыл бұрын
I destroyed my tumbler trying to get it out. Then I destroyed the housing trying to get that off..... like I'm not mechanically retarded, but Jesus fuck every vehicle I've ever owned never ends up being easy peasy like this.
@toxsickdog2 жыл бұрын
how do you remove the damned lock if your key is gone? I lost mine. should I get out the Sawzall ?
@adrtru2 жыл бұрын
shove a skrewdriver in there
@thatredchicken75802 жыл бұрын
So my question is what if you've lost the key and want to replace the cylinder
@Kelly-kr2wr2 жыл бұрын
Ive the same problem
@SirLocksalot2 жыл бұрын
I’m a locksmith and we know how to do it but it involves picking the ignition