How to Replace Combination Switch 1994-2004 Chevy S-10

Buy Now!
New Combination Switch from 1AAuto.com 1aau.to/ib/1AZCC00033
A combination switch typically controls turn signals, windshield wipers, headlights, and more. If one of those systems are not working correctly on your vehicle, you might need to replace the combination switch. This video shows you how to install a new combination switch on your 1994-2004 Chevy S-10.
• Check here for more videos on the 1994-2004 Chevy S-10 • Chevy S-10 2nd Generat...
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pocket Screwdriver
• Trim Tool Set 1aau.to/oqZ/1AXXX00006
• Complete Torx Bit Set 1aau.to/ojP/1AXAA00008
• Ratchet 1aau.to/oWg/1AXAA00016
• Gloves 1aau.to/ogB/1AXSS00048
• Safety Glasses 1aau.to/oeK/1AXAA00343
• Pick 1aau.to/oka/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@kimwagner6917]

I just changed mine by watching your video. I have a 97 s10. My harness was on the left side. I wouldn’t have had enough faith to do it without your video. Thanks a lot.I also didn’t have to take off much.

[@TRQ]

+kim wagner Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@mvan8307]

I have to fix mine as well, however tearing out half the dash does not appeal to me. What all did you remove to make life easier?

[@mvan8307]

For F sake, way to much dismantling for a stupid turn signal switch

[@kittyztigerz]

94 95 96 not same is 97 98 99 to 2004 dash and steelimg culming is different

[@erikjones6833]

This video shows combo switch wiring harness removal under steering column! Only video Ive found that does. Crucial demonstration if you havent seen how to disassemble, especially for a 2001 Chevy express van with very tight space uder the dash. Thank you!!

[@keaaul808]

Very informative video, but would’ve been even more helpful if you proved to sizes of the drivers and wrench sockets.

[@bighurk30able]

Just use this video for a switch on my 98 Blazer excellent directions excellent guide Great job

[@thewrencherz28racer92]

Been out of touch with wrench turning for a bit. This helped me out. Thanks

[@suelo_abuelo8066]

I want to thank you guys so much for this video it definitely helped me replace my multi-function turn signal switch 👍🏽💯

[@blueuniform911]

This is same for 2000 Bravada, S10 Jimmy. Haven't done one since the 80's, very helpful video!

[@johncintron8025]

You a life saver it works for my 96 s 10 thanks for the info

[@rapjrsmusic]

thank u sir....

[@Jay-kl5ew]

Thank u so much .tht u do these vides.my lights wouldn't even come on at all.but every thing alse work.

[@billcurtis4978]

Excellent video

[@andrewpuckett6157]

Any tips for radio only having static? Am and fm. I’ve taken dash apart pulled the wires out put them back in pulled the antenna cable out. I believe it’s the cable from what I’ve read. I just don’t know how to replace it with it barley being able to take the whole dash apart

[@cameriqueTV]

What brought me here? Failed rear turn signals, brake lights and rear flashers. Just Answer says it's the faulty combo switch. 98 S-10, I will give this a try, thanks for showing how!

[@tundy1974]

Ok Friends love this guy's Videos

[@mikeholmes3203]

one question there are 2 versions of these online, 1 is like yours with cruise and other is without, the one with cruise is ½ the price, could I use the cruise one, even though my s10 doesn't have cruise?

[@matthew602]

I have a 95 Sonoma 4.3 tbi automatic I don’t have any of the green and black wires and it shifts really hard would that be a cause or is that just anti theft

[@robertbeauchamp5324]

Do you have a video for 1990 S-10 non tilt

[@ginaguay8392]

Is there anything that would have too do with control switches in the dash that would make your car not idle

[@stevendiffy768]

My dash on my 95 is nothing like this dash. Is it the same procedures?

[@mattingersoll3003]

What does the green and black wire control?

[@solatle9887]

I have 2000 gmc jimmy sle 4x4. The green connector on top of the steering column in this video (6:19) is just hanging loose on Jimmy; I cannot find the receiving end on top of the steering column. Any suggestions on what to do with the dangling green connector? Thanks.

[@raymondscott147]

My rig does not seem to have a place to put that wire where you had the green clip. green/white & black wires? Tips? What does it do?

[@jeffbarton4398]

I didn't know if I had to pull the wheel and now I know how to do it all thanks

[@TRQ]

+Jeff Barton Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@billcurtis4978]

97 Blazer is identical correct?

[@chrisibarra3853]

I am about to do this exact same job , thank you for a clear informative video

[@mikewilliams2721]

Hi, great video. Both my low and high beams stay on with the high/low beam arrow on when the lights are on. Have a 2003 Chevy Blazer 4 x 4 LS. I replaced the relay, light switch , and now multiplication switch. Both lights still remain on and not able to switch high to low beam. Suggestions? Thanks.

[@mswaterfalls]

Hi the same thing is happening to me with my truck It’s a 2002 S10

[@kidalb3rt]

Sounds like a grounding issue.

[@tristancrockett9330]

J

[@sonnyblazer5504]

EXCELLENT TUTORIAL! Best on the web on this particular repair, THANK YOU! LIKE & SUBSCRIBE for you efforts! Sonny (CT)

[@toddanderson6775]

So is it this part or the motor .mine will turn on then not tirn.off. sometimes will not turn on.

[@sped6954]

How necessary is it to remove the dashboard bezel? I think I should be able to snake the two covers out easier because mine is console shifted instead of column, so I won't need to screw around with trying to line up the shift lever boot, since mine doesn't have one. The whole bottom panel comes out without removing the bezel, so the only reason I can see is IF there are any screws obstructed by the bezel, but I don't remember anything like that. I'm going to be doing this on my 2003 ZR-2 Blazer in the not too distant future. I had to call a locksmith to remove my lock cylinder after I got the whole thing torn down. The only reason I needed him was because mine wouldn't turn, so I was at a brick wall. Anyway, I got to the part about installing the upper part of the clamshell, and either I must have been too rough with it, or the 4-way switch was super brittle, because I ended up breaking it off and I was unable to turn the 4-ways off. I tried pushing down on the button, but I was unable to get it to stay locked into place with the top ¾ of the button missing. I must have been too rough with it too, because I ended up losing all turn signals and brake lights. The only way to turn off the 4-ways was to remove the fuse, which caused ALL of the rest of what was working to stop. Right now I'm down to headlights, tail lights and the high mount center stoplight working outside; no turn signals front or rear, no lower brake lights and no 4-ways. Yeah, to say the least, it was an interesting 10 mile journey home through mostly heavy traffic with 100% of my indicators nonfunctional.

[@vsgeghdh1058]

Would be nice for you to do this on a 1994. The steering column and dash is different.

[@codgod1018]

atleast i’m both the only ond

[@calmfarmer8894]

worked great

[@vinnyyazzie9229]

what size is that bolt at 5:33 ??

[@Kcmike-st3iv]

What kind of socket was used at 3:39

[@caleblankford5425]

What are the green and black things for

[@jefrhi]

Anti theft system

[@LostCause-gs9kn]

What drill is that

[@gadasavideos8564]

Guess I need to watch again as I thought I saw bolts going in that I didn't see coming out. Lol

[@grandinfinite5921]

What size bolts.

[@notoriousls5513]

7mm and 10mm

[@derkwayne1833]

I watched this video. Now I are mechanic.

[@fatmanfromtheholler7467]

good video, well that saved a bunch of bs. i thought i would have to pull the airbag and steering wheel. i am used to working on older stuff that is why basic compared to this newer stuff. i say newer still 20 years old now. i started working on stuff from 60s to early 80s. as newer stuff got cheap well here i am. it is almost a comedy seeing how new age stuff is made.

[@TRQ]

+@fatmanfromtheholler7467 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@JRC99]

The bolt for the harness is just spinning

[@davidhall5244]

unnecessary panel removals. you made this way harder than it has to be. found other youtube video that was much simpler

[@rickb8995]

95 s10 with no cruise control has no extra wires like the green and black

[@Karaokeentertainment_]

You have to do all that just to replace a turn signal switch? 😮

[@unkowntrooper1657]

this video is not correct the dash on 98 and up are different

[@jonathonlyles3349]

Who else noticed the Duracell car battry

[@THEOFFICIALJakeFromStateFarm]

Did this perfectly and nothing on it works at all

[@rafaelmelendez2990]

I lake you chanel

[@crowvelle]

I guess I don't need wipers.

[@joshuaforster7798]

94 S10s do not have the same daah and steering wheel as 95+ this video unfortunately is misleading for me.

[@makaylaslater5247]

This is how you change one in a 97 to 2005

[@darthslipknot5904]

This video is only good for a 98 or newer not 94-04

[@bubbalouie4022]

My 1995 is a stick and is nothing like this. Not even close.

[@suttonshiver1317]

My grandmas 1994 is totally different