How to Replace Rear Axle Seal 2003-2011 Mercury Grand Marquis

Shop for New Auto Parts at 1AAuto.com trq.video/c-38...
This video shows you how to install a rear axle seal on your 2003-2011 Mercury Grand Marquis. This seal is for the end of a solid axle tube, to keep gear oil in, and the elements out. A leaking seal could lead to considerable damage to your differential. Or, if you needed to remove an axle, or a bearing, or do maintenance on a differential, you should install a new seal when you put things back together.
This repair was done on a 2009 Mercury Grand Marquis LS 4.6L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• Pry Bar trq.video/oKy-...
• 10mm Wrench trq.video/oND-...
• 8mm Wrench trq.video/ogJ-...
• 10mm Socket trq.video/oaRK...
• 13mm Socket trq.video/oa9x...
• 21mm Socket
• Air Compressor
• Bearing Race and Seal Driver www.1aauto.com...
• Seal Puller www.1aauto.com...
• 3/8 Inch Socket trq.video/obkb...
• Ratchet trq.video/obkb...
• Socket Extensions trq.video/oa9x...
• Torque Wrench trq.video/oaqj...
• Brake Parts Cleaner
• Cloth Rags trq.video/oyb-...
• Copper Anti-Seize
• Gasket Adhesive
• Gear Oil
• Liquid Thread Locker
• Petroleum Jelly
• Drain Pan
• Hammer
• Razor Blade / Gasket Scraper
• Wire Brush trq.video/oqC-...
Subscribe: / @trq
Check out our playlist:
Mercury Grand Marquis 5th Generation 2003-2011: • Mercury Grand Marquis ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@frankmc5112]

I like how every car comes TRQ works on comes from a Northern climate. That means the job will be way easier for me down south. haha.

[@deronaldbaggett3828]

Really good video very thorough great on the details!!!

[@guadalupemagna4227]

Thanks for your video very helpful!!!

[@charlestaylor3020]

Bolt torques for the differential 8 mm bolt inside the diff and oil pan bolts would be helpful for inexperienced DIY mechanics who dont have your experience with the repair. Hopefully they have a torque wrench.

[@Jeff-hx4lm]

Great video. Thank you

[@wmcwmc8623]

WELL DONE THANKS!!!

[@JervonBrown2]

Is this a DIY type of project and if so what level would it be of difficulty

[@miguelmaldonado9881]

YOURE ONE MESSY MECHANIC

[@notyou6950]

That must been Detroit run car. Definitely a rust belt casualty...