How to Replace Clutch Kit 2006-2011 Honda Civic

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@AMGELECTRONICS]

Hello good evening Nice video perfect explanation ! How much in USA a job like that

[@mitchellboyes5299]

This took me a lot longer than an hour lol, about 7 taking out the trans, half hour on clutch, and about 12 hours putting back together with torquing and lining up. I reccomend to tie your steering rack up to your struts (zinging tight to the point where it feels like the tie rods are going to bend) using tie downs so the splines in the steering rack don’t disconnect from the steering column. If your rack falls out of place your going to perhaps need to get it realigned. I fortunately did not have it disconnect but have heard horror stories about it lol

[@thericerrocket7735]

Hey it’s taken me far to long to find this video I’ve been doing a engine swap on my r18 It’s taken almost a year a lot going on, this video might just save my life tho I’m putting a new exedy clutch kit on today!!

[@23for82bigs]

Amazing video. I now feel confident I can change the clutch in my 8th gen si!

[@johnathonfoster1325]

Yo thank you I for posting this it helped me do a whole trans swap

[@garrettmehan3904]

Thanks trq. Love you guys

[@jptrainor]

30:00 Drop the engine a little bit so that the trans goes in an ever so slight angle and clears the frame rail.... that's the hint I needed. The bolt as an alignment device is helpful too.

[@domingson]

Thank you! I will be doing exactly the same by myself for the first time. Just one question. Were you supposed to have the flywheel resurfaced?? I heard from a mechanic that it should be either replaced or resurfaced. Thank you again

[@McDzy]

Would this be similar to a 06-11 Honda Civic Si? Or just base models? EX, LX, DX?

[@jamie66233]

Nice job! Gotta love when previous techs leave out hardware! Smh. Also What a stupid setup for a cold air intake. 🙄. One puddle and that engine is done! Lol!

[@isaiahcrowell4819]

I just did this whole job and I have no pressure and can't engage and disengage the clutch. I realized my power steering is disconnected too as it stretched. Would this have anything to do with it? Do I just need to bleed the clutch?

[@gavincooper478]

Why do some cars not come with pilot bearing? My pilot bearing is shot and thinking about replacing

[@reverendosaquic7611]

What's the name of the stand tool he used to hold the frame

[@wethebest777]

Is this 1.8L engine? Wht there is no pilot bearing at the flywheel?

[@ll.7927]

There is b ur it’s not really a bearing

[@easylearn9350]

Great job; thanks for sharing that. Q: Are all 8gen 2006-2011 civics have the same transmission? particularly hatchback 1.8l EU models with available models in the US? I noticed a difference in the filling-up bolt (with/ without sucket); please correct me if I am wrong. :|

[@RipThatVette]

Big help. Thanks

[@spacejam5394]

Is this for base model or SI????

[@PortugueseFlyingStew]

How long did it take to complete from start to finish?

[@ivan.kurkakov]

What ring was installed inside the flywheel?

[@comeconcon569]

How long does it take to replace a clutch and flywheel?

[@cjason7202]

Do you not have to bleed the clutch ?

[@howtoshootstraighthtss4948]

How come u didnt replace the flywheel?

[@beeradfpv]

you don't resurface the flywheel?

[@adnerflores2827]

teacher, what was the reason for the change of clutch???? what faults did the honda civic have....

[@bryce2113]

You didn't replace or resurface the flywheel?!?!

[@BigPackets]

anybody did this without removing the subframe?

[@adnerflores2827]

One question, is this Honda Civic automatic transmission or standard?

[@AbdullahKhan-nb6lf]

Distel engine problem

[@bolts5994]

FFS.....why in the world can't they design a clutch that is easy (easier) to replace?? Jesus H Christ

[@reverendosaquic7611]

Hi

[@TRQ]

+Reverendo Saquic Thanks for watching our video! 1aau.to/m/Shop-TRQ