Рет қаралды 13,684
Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASL...
This video shows you how to install new control arms in your 2013-2017 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2013 Honda Accord
2014 Honda Accord
2015 Honda Accord
2016 Honda Accord
2017 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oYa/1AX...
• 14mm Socket 1aau.to/obGn/1A...
• 19mm Socket 1aau.to/oaoG/1A...
• 36mm Socket 1aau.to/ocg/1AA...
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ovp/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obJF/1A...
• Torque Wrench 1aau.to/oaN2/1A...
• Cotter Pin
• Gloves 1aau.to/oap6/1A...
• Safety Glasses
• Floor Jack 1aau.to/oac7/1A...
• Hammer
• Jack Stands 1aau.to/oZJ/1AX...
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.